netdev - Re: tg3: BMC stops responding in 3.0

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20110929235701.GA9513@mcarlson.broadcom.com>
Date:	Thu, 29 Sep 2011 16:57:01 -0700
From:	"Matt Carlson" <mcarlson@...adcom.com>
To:	"Arkadiusz Mi??kiewicz" <a.miskiewicz@...il.com>
cc:	"Matthew Carlson" <mcarlson@...adcom.com>,
	"Michael Chan" <mchan@...adcom.com>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: tg3: BMC stops responding in 3.0

On Mon, Sep 26, 2011 at 11:31:33AM -0700, Arkadiusz Mi??kiewicz wrote:
> On Monday 26 of September 2011, Matt Carlson wrote:
> > On Fri, Sep 23, 2011 at 12:45:50PM -0700, Arkadiusz Mi??kiewicz wrote:
> > > Hi,
> > > 
> > > I was using 2.6.38.8 and recently tried to switch to 3.0.4 on Tyan S2891
> > > platform.
> > > 
> > > This platform uses tg3:
> > > tg3 0000:0a:09.1: eth1: Tigon3 [partno(BCM95704) rev 2003]
> > > (PCIX:133MHz:64- bit) MAC address 00:e0:81:33:5e:af
> > > tg3 0000:0a:09.1: eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet)
> > > (WireSpeed[1], EEE[0])
> > > tg3 0000:0a:09.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0]
> > > TSOcap[1] tg3 0000:0a:09.1: eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
> > > 
> > > With 2.6.38.8 everything was working fine. With 3.0.4 there is a problem.
> > > As soon as tg3 module is loaded or eth0 configured (can't tell which one
> > > since the machine is 400km away from me and I have no way to play with
> > > it other than ipmi or ssh) BMC stops responding (so all ipmitool
> > > commands over LAN stop working). Normal tg3 activity is not affected - I
> > > can ssh-in without a problem etc but ipmi over lan doesn't work.
> > > 
> > > From ssh console "ipmitool lan print" works, shows data but for example
> > > after "ipmitool mc reset cold" it doesn't recover - ipmitool returns
> > > "Invalid channel: 255". I have to reboot to 2.6.38.8 and then issue
> > > "ipmitool mc reset cold" to recover.
> > > 
> > > Any idea which tg3 change could break this? Can't bisect this due remote
> > > access only.
> > > 
> > > I was hoping that maybe 9e975cc291d80d5e4562d6bed15ec171e896d69b
> > > "tg3: Fix io failures after chip reset" will fix things for me but no -
> > > this doesn't help.
> > 
> > What version of the tg3 driver are you working with?
> 
> The one in 3.0.4 kernel. I think it's 3.119 (at least modinfo says so).

Unfortunately there were a lot of changes between 3.117 and 3.119(+).
Is there any way you can narrow down the gap?

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html