| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1317988730-4197-2-git-send-email-sucheta.chakraborty@qlogic.com>
Date: Fri, 7 Oct 2011 04:58:50 -0700
From: Sucheta Chakraborty <sucheta.chakraborty@...gic.com>
To: Ben Hutchings <bhutchings@...arflare.com>
CC: <netdev@...r.kernel.org>,
Dept_NX_Linux_NIC_Driver <Dept_NX_Linux_NIC_Driver@...gic.com>
Subject: [PATCH 1/1] ethtool: add ETHTOOL_{G,S}CHANNEL support.
Used to configure number of tx/ rx/ other channels.
Reqd. man page changes are included.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@...gic.com>
---
ethtool.8.in | 29 ++++++++++++++
ethtool.c | 120 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 149 insertions(+), 0 deletions(-)
diff --git a/ethtool.8.in b/ethtool.8.in
index efc6098..f9d3633 100644
--- a/ethtool.8.in
+++ b/ethtool.8.in
@@ -307,6 +307,16 @@ ethtool \- query or control network driver and hardware settings
.BN action
.BN loc
.RB ]
+.HP
+.B ethtool \-l|\-\-show\-channels
+.I ethX
+.HP
+.B ethtool \-L|\-\-set\-channels
+.I ethX
+.BN rx
+.BN tx
+.BN other
+.BN combined
.
.\" Adjust lines (i.e. full justification) and hyphenate.
.ad
@@ -754,6 +764,25 @@ lB l.
Specify the location/ID to insert the rule. This will overwrite
any rule present in that location and will not go through any
of the rule ordering process.
+.TP
+.B \-l \-\-show\-channels
+Queries the specified network device for the numbers of channels it has.
+A channel is an IRQ and the set of queues that can trigger that IRQ.
+.TP
+.B \-L \-\-set\-channels
+Changes the numbers of channels of the specified network device.
+.TP
+.BI rx \ N
+Changes the number of channels with only receive queues.
+.TP
+.BI tx \ N
+Changes the number of channels with only transmit queues.
+.TP
+.BI other \ N
+Changes the number of channels used only for other purposes e.g. link interrupts or SR-IOV co-ordination.
+.TP
+.BI combined \ N
+Changes the number of multi-purpose channels.
.SH BUGS
Not supported (in part or whole) on all network drivers.
.SH AUTHOR
diff --git a/ethtool.c b/ethtool.c
index d7d2d58..c533a48 100644
--- a/ethtool.c
+++ b/ethtool.c
@@ -80,6 +80,8 @@ static int do_gpause(int fd, struct ifreq *ifr);
static int do_spause(int fd, struct ifreq *ifr);
static int do_gring(int fd, struct ifreq *ifr);
static int do_sring(int fd, struct ifreq *ifr);
+static int do_schannels(int fd, struct ifreq *ifr);
+static int do_gchannels(int fd, struct ifreq *ifr);
static int do_gcoalesce(int fd, struct ifreq *ifr);
static int do_scoalesce(int fd, struct ifreq *ifr);
static int do_goffload(int fd, struct ifreq *ifr);
@@ -133,6 +135,8 @@ static enum {
MODE_PERMADDR,
MODE_SET_DUMP,
MODE_GET_DUMP,
+ MODE_GCHANNELS,
+ MODE_SCHANNELS
} mode = MODE_GSET;
static struct option {
@@ -266,6 +270,12 @@ static struct option {
{ "-W", "--set-dump", MODE_SET_DUMP,
"Set dump flag of the device",
" N\n"},
+ { "-l", "--show-channels", MODE_GCHANNELS, "Query Channels" },
+ { "-L", "--set-channels", MODE_SCHANNELS, "Set Channels",
+ " [ rx N ]\n"
+ " [ tx N ]\n"
+ " [ other N ]\n"
+ " [ combined N ]\n" },
{ "-h", "--help", MODE_HELP, "Show this help" },
{ NULL, "--version", MODE_VERSION, "Show version number" },
{}
@@ -331,6 +341,13 @@ static s32 ring_rx_mini_wanted = -1;
static s32 ring_rx_jumbo_wanted = -1;
static s32 ring_tx_wanted = -1;
+static struct ethtool_channels echannels;
+static int gchannels_changed;
+static s32 channels_rx_wanted = -1;
+static s32 channels_tx_wanted = -1;
+static s32 channels_other_wanted = -1;
+static s32 channels_combined_wanted = -1;
+
static struct ethtool_coalesce ecoal;
static int gcoalesce_changed = 0;
static s32 coal_stats_wanted = -1;
@@ -495,6 +512,13 @@ static struct cmdline_info cmdline_ring[] = {
{ "tx", CMDL_S32, &ring_tx_wanted, &ering.tx_pending },
};
+static struct cmdline_info cmdline_channels[] = {
+ { "rx", CMDL_S32, &channels_rx_wanted, &echannels.rx_count },
+ { "tx", CMDL_S32, &channels_tx_wanted, &echannels.tx_count },
+ { "other", CMDL_S32, &channels_other_wanted, &echannels.other_count },
+ { "combined", CMDL_S32, &channels_combined_wanted, &echannels.combined_count },
+};
+
static struct cmdline_info cmdline_coalesce[] = {
{ "adaptive-rx", CMDL_BOOL, &coal_adaptive_rx_wanted, &ecoal.use_adaptive_rx_coalesce },
{ "adaptive-tx", CMDL_BOOL, &coal_adaptive_tx_wanted, &ecoal.use_adaptive_tx_coalesce },
@@ -787,6 +811,8 @@ static void parse_cmdline(int argc, char **argp)
(mode == MODE_GCOALESCE) ||
(mode == MODE_SCOALESCE) ||
(mode == MODE_GRING) ||
+ (mode == MODE_GCHANNELS) ||
+ (mode == MODE_SCHANNELS) ||
(mode == MODE_SRING) ||
(mode == MODE_GOFFLOAD) ||
(mode == MODE_SOFFLOAD) ||
@@ -871,6 +897,14 @@ static void parse_cmdline(int argc, char **argp)
i = argc;
break;
}
+ if (mode == MODE_SCHANNELS) {
+ parse_generic_cmdline(argc, argp, i,
+ &gchannels_changed,
+ cmdline_channels,
+ ARRAY_SIZE(cmdline_ring));
+ i = argc;
+ break;
+ }
if (mode == MODE_SCOALESCE) {
parse_generic_cmdline(argc, argp, i,
&gcoalesce_changed,
@@ -1751,6 +1785,32 @@ static int dump_ring(void)
return 0;
}
+static int dump_channels(void)
+{
+ fprintf(stdout,
+ "Pre-set maximums:\n"
+ "RX: %u\n"
+ "TX: %u\n"
+ "Other: %u\n"
+ "Combined: %u\n",
+ echannels.max_rx, echannels.max_tx,
+ echannels.max_other,
+ echannels.max_combined);
+
+ fprintf(stdout,
+ "Current hardware settings:\n"
+ "RX: %u\n"
+ "TX: %u\n"
+ "Other: %u\n"
+ "Combined: %u\n",
+ echannels.rx_count, echannels.tx_count,
+ echannels.other_count,
+ echannels.combined_count);
+
+ fprintf(stdout, "\n");
+ return 0;
+}
+
static int dump_coalesce(void)
{
fprintf(stdout, "Adaptive RX: %s TX: %s\n",
@@ -1937,6 +1997,10 @@ static int doit(void)
return do_gring(fd, &ifr);
} else if (mode == MODE_SRING) {
return do_sring(fd, &ifr);
+ } else if (mode == MODE_GCHANNELS) {
+ return do_gchannels(fd, &ifr);
+ } else if (mode == MODE_SCHANNELS) {
+ return do_schannels(fd, &ifr);
} else if (mode == MODE_GOFFLOAD) {
return do_goffload(fd, &ifr);
} else if (mode == MODE_SOFFLOAD) {
@@ -2114,6 +2178,62 @@ static int do_gring(int fd, struct ifreq *ifr)
return 0;
}
+static int do_schannels(int fd, struct ifreq *ifr)
+{
+ int err, changed = 0;
+
+ echannels.cmd = ETHTOOL_GCHANNELS;
+ ifr->ifr_data = (caddr_t)&echannels;
+ err = send_ioctl(fd, ifr);
+ if (err) {
+ perror("Cannot get device channel parameters");
+ return 1;
+ }
+
+ do_generic_set(cmdline_channels, ARRAY_SIZE(cmdline_channels),
+ &changed);
+
+ if (!changed) {
+ fprintf(stderr, "no channel parameters changed, aborting\n");
+ fprintf(stderr, "current values: tx %u rx %u other %u"
+ "combined %u\n", echannels.rx_count,
+ echannels.tx_count, echannels.other_count,
+ echannels.combined_count);
+ return 1;
+ }
+
+ echannels.cmd = ETHTOOL_SCHANNELS;
+ ifr->ifr_data = (caddr_t)&echannels;
+ err = send_ioctl(fd, ifr);
+ if (err) {
+ perror("Cannot set device channel parameters");
+ return 1;
+ }
+
+ return 0;
+}
+
+static int do_gchannels(int fd, struct ifreq *ifr)
+{
+ int err;
+
+ fprintf(stdout, "Channel parameters for %s:\n", devname);
+
+ echannels.cmd = ETHTOOL_GCHANNELS;
+ ifr->ifr_data = (caddr_t)&echannels;
+ err = send_ioctl(fd, ifr);
+ if (err == 0) {
+ err = dump_channels();
+ if (err)
+ return err;
+ } else {
+ perror("Cannot get device channel parameters\n");
+ return 1;
+ }
+ return 0;
+
+}
+
static int do_gcoalesce(int fd, struct ifreq *ifr)
{
int err;
--
1.7.3.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists