[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1319144425-15547-13-git-send-email-Kyle.D.Moffett@boeing.com>
Date: Thu, 20 Oct 2011 17:00:19 -0400
From: Kyle Moffett <Kyle.D.Moffett@...ing.com>
To: linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Cc: Kyle Moffett <Kyle.D.Moffett@...ing.com>,
Lucas De Marchi <lucas.demarchi@...fusion.mobi>,
Paul <paul.gortmaker@...driver.com>
Subject: [RFC PATCH 12/17] tc35815: Use standard phy_init_hw() instead of BMCR_RESET bit
The PHY should not be manually reset with the BMCR, as that will undo
board-specific PHY fixups and driver-specific phy->drv->config_init().
Instead, the PHY should be reset using phy_init_hw().
NOTE: Depends on earlier phy_init_hw() patch.
Not-yet-Signed-off-by: Kyle Moffett <Kyle.D.Moffett@...ing.com>
---
drivers/net/tc35815.c | 15 ++-------------
1 files changed, 2 insertions(+), 13 deletions(-)
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 4a55a16..c3422f8 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -1175,19 +1175,8 @@ static void tc35815_restart(struct net_device *dev)
{
struct tc35815_local *lp = netdev_priv(dev);
- if (lp->phy_dev) {
- int timeout;
-
- phy_write(lp->phy_dev, MII_BMCR, BMCR_RESET);
- timeout = 100;
- while (--timeout) {
- if (!(phy_read(lp->phy_dev, MII_BMCR) & BMCR_RESET))
- break;
- udelay(1);
- }
- if (!timeout)
- printk(KERN_ERR "%s: BMCR reset failed.\n", dev->name);
- }
+ if (lp->phy_dev)
+ phy_init_hw(lp->phy_dev);
spin_lock_bh(&lp->rx_lock);
spin_lock_irq(&lp->lock);
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists