[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJhJPsXxUAuF9HdivLd66MQC45mz-iYAuF1SdGdU=-duxJJ5bQ@mail.gmail.com>
Date: Mon, 24 Oct 2011 22:05:06 +0800
From: Kelvin Cheung <keguang.zhang@...il.com>
To: Giuseppe CAVALLARO <peppe.cavallaro@...com>
Cc: Wu Zhangjin <wuzhangjin@...il.com>, linux-mips@...ux-mips.org,
linux-kernel@...r.kernel.org, ralf@...ux-mips.org,
r0bertz@...too.org, netdev@...r.kernel.org
Subject: Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
2011/10/24, Giuseppe CAVALLARO <peppe.cavallaro@...com>:
> Hello Kelvin.
>
> On 10/24/2011 12:36 PM, Kelvin Cheung wrote:
>
> [snip]
>
>> According to datasheet of Loongson 1B, the buffer size in RX/TX
>> descriptor is only 2KB. So the Loongson1B's GMAC could not handle
>> jumbo frames. And the second buffer is useless in this case. Am I
>> right? Is there a better way than ifdef CONFIG_MACH_LOONGSON1 to
>> avoid duplicate code?
>
> Sorry for my misunderstanding.
>
> I think you have to use the normal descriptor and remove the enh_desc
> from the platform w/o modifying the driver at all.
>
> The driver will be able to select/configure all automatically (also jumbo).
>
> Let me know.
That's the problem.
The bitfield definition of Loongson1B is also different from normal descriptor.
Moreover, I want to enable the TX checksum offload function which is
not supported in normal descriptor.
Any suggestions?
> Note:
> IIRC, there is a bit difference in case of normal descriptors for
> Synopsys databook newer than the 1.91 (I used for testing this mode).
> In any case, I remember that, on some platforms, the normal descriptors
> have been used w/o problems also on these new chip generations.
>
> Peppe
>
>
--
Best Regards!
Kelvin
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists