| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1319622039-10553-5-git-send-email-yanivr@broadcom.com>
Date: Wed, 26 Oct 2011 11:40:36 +0200
From: "Yaniv Rosner" <yanivr@...adcom.com>
To: "David Miller" <davem@...emloft.net>
cc: netdev <netdev@...r.kernel.org>,
"Yaniv Rosner" <yanivr@...adcom.com>,
"Eilon Greenstein" <eilong@...adcom.com>
Subject: [net 4/7] bnx2x: Fix 54618se LED behavior
Signed-off-by: Yaniv Rosner <yanivr@...adcom.com>
Signed-off-by: Eilon Greenstein <eilong@...adcom.com>
---
drivers/net/bnx2x/bnx2x_link.c | 44 ++++++++++++++++++++-------------------
1 files changed, 23 insertions(+), 21 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index ea2a11d..5acf274 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -5993,7 +5993,13 @@ int bnx2x_set_led(struct link_params *params,
SHARED_HW_CFG_LED_MAC1);
tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
- EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE));
+ if (params->phy[EXT_PHY1].type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE)
+ EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp & 0xfff1);
+ else {
+ EMAC_WR(bp, EMAC_REG_EMAC_LED,
+ (tmp | EMAC_LED_OVERRIDE));
+ }
break;
case LED_MODE_OPER:
@@ -6046,8 +6052,15 @@ int bnx2x_set_led(struct link_params *params,
else
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
hw_led_mode);
+ } else if ((params->phy[EXT_PHY1].type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) &&
+ (mode != LED_MODE_OPER)) {
+ REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
+ tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+ EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp | 0x3);
} else
- REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode);
+ REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
+ hw_led_mode);
REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0);
/* Set blinking rate to ~15.9Hz */
@@ -6059,8 +6072,13 @@ int bnx2x_set_led(struct link_params *params,
LED_BLINK_RATE_VAL_E1X_E2);
REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 +
port*4, 1);
- tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
- EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp & (~EMAC_LED_OVERRIDE)));
+ if ((params->phy[EXT_PHY1].type !=
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) &&
+ (mode != LED_MODE_OPER)) {
+ tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+ EMAC_WR(bp, EMAC_REG_EMAC_LED,
+ (tmp & (~EMAC_LED_OVERRIDE)));
+ }
if (CHIP_IS_E1(bp) &&
((speed == SPEED_2500) ||
@@ -10304,22 +10322,6 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy,
return 0;
}
-static void bnx2x_54618se_set_link_led(struct bnx2x_phy *phy,
- struct link_params *params, u8 mode)
-{
- struct bnx2x *bp = params->bp;
- DP(NETIF_MSG_LINK, "54618SE set link led (mode=%x)\n", mode);
- switch (mode) {
- case LED_MODE_FRONT_PANEL_OFF:
- case LED_MODE_OFF:
- case LED_MODE_OPER:
- case LED_MODE_ON:
- default:
- break;
- }
- return;
-}
-
static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy,
struct link_params *params)
{
@@ -11095,7 +11097,7 @@ static struct bnx2x_phy phy_54618se = {
.config_loopback = (config_loopback_t)bnx2x_54618se_config_loopback,
.format_fw_ver = (format_fw_ver_t)NULL,
.hw_reset = (hw_reset_t)NULL,
- .set_link_led = (set_link_led_t)bnx2x_54618se_set_link_led,
+ .set_link_led = (set_link_led_t)NULL,
.phy_specific_func = (phy_specific_func_t)NULL
};
/*****************************************************************/
--
1.7.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists