[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <SNT113-W38A7D5A673342F70A1F808DBD40@phx.gbl>
Date: Wed, 2 Nov 2011 12:59:47 +0100
From: Carlos Peón Costa <carlospeon@...mail.com>
To: <dmitry@...adcom.com>
CC: <netdev@...r.kernel.org>
Subject: RE: bnx2x kerneloops
Hi, It's a HP BL460c G6.
Regards.
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM57711E 10-Gigabit PCIe Subsystem: Hewlett-Packard Company NC532i Dual Port 10GbE Multifunction BL-C Adapter Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 28 Region 0: Memory at fb000000 (64-bit, non-prefetchable) [size=8M] Region 2: Memory at fa800000 (64-bit, non-prefetchable) [size=8M] [virtual] Expansion ROM at e4000000 [disabled] [size=64K] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Product Name: HP_NC532i_DP_10GbE_Multifunction_BL-c_Adapter Read-only fields: [PN] Part number: N/A [EC] Engineering changes: N/A [SN] Serial number: 0123456789 [MN] Manufacture ID: 31 34 65 34 [RV] Reserved: checksum good, 39 byte(s) reserved End Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [a0] MSI-X: Enable+ Count=17 Masked- Vector table: BAR=0 offset=00440000 PBA: BAR=0 offset=00441800 Capabilities: [ac] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <2us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ MaxPayload 256 bytes, MaxReadReq 4096 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <4us, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100] Device Serial Number d8-d3-85-ff-fe-59-86-48 Capabilities: [110] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [150] Power Budgeting <?> Capabilities: [160] Virtual Channel <?> Kernel driver in use: bnx2x Kernel modules: bnx2x
----------------------------------------
> Subject: Re: bnx2x kerneloops
> From: dmitry@...adcom.com
> To: carlospeon@...mail.com
> CC: netdev@...r.kernel.org
> Date: Wed, 2 Nov 2011 13:54:05 +0200
>
> Which HW you are using?
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists