| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4EC23EE7.2010606@intel.com> Date: Tue, 15 Nov 2011 18:28:55 +0800 From: "Yan, Zheng" <zheng.z.yan@...el.com> To: Martin Volf <martin.volf.42@...il.com> CC: "shemminger@...ux-foundation.org" <shemminger@...ux-foundation.org>, "bridge@...ts.linux-foundation.org" <bridge@...ts.linux-foundation.org>, "netdev@...r.kernel.org" <netdev@...r.kernel.org>, "davem@...emloft.net" <davem@...emloft.net>, "wcang@....wide.ad.jp" <wcang@....wide.ad.jp> Subject: Re: sky2 hw csum failure On 11/15/2011 05:05 PM, Martin Volf wrote: > Hello, > > since 3.0.6 I get many "eth0: hw csum failure" messages in dmesg > followed by a call trace (see at the end). 3.0.4 is OK, 3.1.1 is not. > > When I revert the "bridge: Pseudo-header required for the checksum of > ICMPv6" commit, 4b275d7efa1c4412f0d572fcd7f78ed0919370b3, in 3.1.1, > the messages would not occur. > > I have two sky2 interfaces bridged together and I use IPv6, but not > MLD. Most of the time only one interface is connected, the message > occurs for either of them. Another machine with bridged e1000 and > r8169 interfaces is OK even without the revert. > > Let me know, if more information is needed to create the correct fix. > > Martin Volf > > -- > > HW info from 3.1.1 with the commit reverted: > > uname -mp > > x86_64 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz > > dmesg | fgrep sky2 > > [ 11.226565] sky2: driver version 1.29 > [ 11.226601] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > [ 11.226614] sky2 0000:04:00.0: setting latency timer to 64 > [ 11.226644] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3 > [ 11.226719] sky2 0000:04:00.0: irq 47 for MSI/MSI-X > [ 11.227327] sky2 0000:04:00.0: eth0: addr 00:22:15:98:82:ae > [ 11.227338] sky2 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > [ 11.227346] sky2 0000:03:00.0: setting latency timer to 64 > [ 11.227366] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3 > [ 11.227436] sky2 0000:03:00.0: irq 48 for MSI/MSI-X > [ 11.227625] sky2 0000:03:00.0: eth1: addr 00:22:15:98:92:e1 > [ 31.809358] sky2 0000:03:00.0: eth1: enabling interface > [ 31.816587] sky2 0000:04:00.0: eth0: enabling interface > [ 34.196835] sky2 0000:04:00.0: eth0: Link is up at 1000 Mbps, full > duplex, flow control both > > ethtool -k eth0 (same for eth1) > > Offload parameters for eth0: > rx-checksumming: on > tx-checksumming: on > scatter-gather: on > tcp-segmentation-offload: on > udp-fragmentation-offload: off > generic-segmentation-offload: on > generic-receive-offload: on > large-receive-offload: off > rx-vlan-offload: on > tx-vlan-offload: on > ntuple-filters: off > receive-hashing: on > > lspci -vvvxxx > 03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 > PCI-E Gigabit Ethernet Controller (rev 12) > Subsystem: ASUSTeK Computer Inc. Device 81f8 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 48 > Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K] > Region 2: I/O ports at c800 [size=256] > Expansion ROM at fe9c0000 [disabled] [size=128K] > Capabilities: [48] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data > Product Name: Marvell Yukon 88E8056 Gigabit Ethernet Controller > Read-only fields: > [PN] Part number: Yukon 88E8056 > [EC] Engineering changes: Rev. 1.2 > [MN] Manufacture ID: 4d 61 72 76 65 6c 6c > [SN] Serial number: AbCdEfG9892E1 > [CP] Extended capability: 01 10 cc 03 > [RV] Reserved: checksum good, 9 byte(s) reserved > Read/write fields: > [RW] Read-write area: 121 byte(s) free > End > Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0300c Data: 4199 > Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ > AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 <256ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- > SlotClk+ DLActive- BWMgmt- ABWMgmt- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- > UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 1f, GenCap- CGenEn- ChkCap- ChkEn- > Kernel driver in use: sky2 > Kernel modules: sky2 > 00: ab 11 64 43 07 04 10 00 12 00 00 02 08 00 00 00 > 10: 04 c0 9f fe 00 00 00 00 01 c8 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 f8 81 > 30: 00 00 9c fe 48 00 00 00 00 00 00 00 05 01 00 00 > 40: 00 00 f0 01 00 80 a0 01 01 50 03 fe 00 20 00 13 > 50: 03 5c fc 80 00 00 00 78 00 00 00 01 05 e0 81 00 > 60: 0c 30 e0 fe 00 00 00 00 99 41 00 00 00 00 00 00 > 70: 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 70 00 00 00 00 00 00 82 a8 e8 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 10 00 11 00 c0 8f 28 00 00 20 19 00 11 ac 07 00 > f0: 08 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00 > > Call trace: > > [ 64.240856] eth1: hw csum failure. > [ 64.240860] Pid: 0, comm: swapper Not tainted 3.1.1 #1 > [ 64.240862] Call Trace: > [ 64.240864] <IRQ> [<ffffffff812acebf>] ? netdev_rx_csum_fault+0x29/0x31 > [ 64.240875] [<ffffffff812a8e42>] ? __skb_checksum_complete_head+0x44/0x59 > [ 64.240884] [<ffffffffa0174ea7>] ? br_multicast_rcv+0x7fc/0xc3f [bridge] > [ 64.240888] [<ffffffff81095c16>] ? dma_pool_alloc+0x267/0x279 > [ 64.240893] [<ffffffff8102177d>] ? check_preempt_curr+0x38/0x61 > [ 64.240898] [<ffffffffa016e187>] ? NF_HOOK.clone.4+0x56/0x56 [bridge] > [ 64.240903] [<ffffffff812d1472>] ? nf_hook_slow+0x73/0x111 > [ 64.240908] [<ffffffffa016e187>] ? NF_HOOK.clone.4+0x56/0x56 [bridge] > [ 64.240914] [<ffffffffa0172706>] ? br_nf_forward_finish+0x95/0x95 [bridge] > [ 64.240919] [<ffffffffa016e205>] ? > br_handle_frame_finish+0x7e/0x1f3 [bridge] > [ 64.240925] [<ffffffffa017278f>] ? > br_nf_pre_routing_finish_ipv6+0x89/0x92 [bridge] > [ 64.240931] [<ffffffffa0171efe>] ? setup_pre_routing+0x38/0x5d [bridge] > [ 64.240936] [<ffffffffa0172f65>] ? br_nf_pre_routing+0x3bb/0x3cb [bridge] > [ 64.240940] [<ffffffff81026f31>] ? find_busiest_group+0x1fc/0x851 > [ 64.240943] [<ffffffff810242c4>] ? enqueue_task_fair+0x126/0x219 > [ 64.240947] [<ffffffff812d13c9>] ? nf_iterate+0x41/0x77 > [ 64.240952] [<ffffffffa016e187>] ? NF_HOOK.clone.4+0x56/0x56 [bridge] > [ 64.240957] [<ffffffffa016e187>] ? NF_HOOK.clone.4+0x56/0x56 [bridge] > [ 64.240961] [<ffffffff812d1472>] ? nf_hook_slow+0x73/0x111 > [ 64.240966] [<ffffffffa016e187>] ? NF_HOOK.clone.4+0x56/0x56 [bridge] > [ 64.240971] [<ffffffffa016e187>] ? NF_HOOK.clone.4+0x56/0x56 [bridge] > [ 64.240976] [<ffffffffa016e16d>] ? NF_HOOK.clone.4+0x3c/0x56 [bridge] > [ 64.240982] [<ffffffffa016e529>] ? br_handle_frame+0x1af/0x1c6 [bridge] > [ 64.240987] [<ffffffffa016e37a>] ? > br_handle_frame_finish+0x1f3/0x1f3 [bridge] > [ 64.240990] [<ffffffff812af07b>] ? __netif_receive_skb+0x26a/0x3b1 > [ 64.240994] [<ffffffff812af34e>] ? netif_receive_skb+0x52/0x58 > [ 64.240997] [<ffffffff812af7fe>] ? napi_gro_receive+0x1f/0x2f > [ 64.241000] [<ffffffff812af425>] ? napi_skb_finish+0x1c/0x31 > [ 64.241011] [<ffffffffa001459e>] ? sky2_poll+0x784/0x999 [sky2] > [ 64.241015] [<ffffffff812af8da>] ? net_rx_action+0x61/0x117 > [ 64.241019] [<ffffffff81031164>] ? __do_softirq+0x7f/0x106 > [ 64.241023] [<ffffffff8135af8c>] ? call_softirq+0x1c/0x30 > [ 64.241027] [<ffffffff8100365a>] ? do_softirq+0x31/0x67 > [ 64.241030] [<ffffffff81031390>] ? irq_exit+0x3f/0xa3 > [ 64.241033] [<ffffffff810033b7>] ? do_IRQ+0x85/0x9e > [ 64.241036] [<ffffffff813597ab>] ? common_interrupt+0x6b/0x6b > [ 64.241038] <EOI> [<ffffffff810081c1>] ? mwait_idle+0x59/0x5c > [ 64.241044] [<ffffffff8100098a>] ? cpu_idle+0x5c/0x7e > [ 64.241047] [<ffffffff8166f886>] ? start_kernel+0x304/0x30f Hi, I re-tested the checksum code, both CHECKSUM_NONE and CHECKSUM_COMPLETE cases are OK. Maybe the bug is related to sky2. Regards Yan, Zheng -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists