| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1321447892-14381-6-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Wed, 16 Nov 2011 04:51:29 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com,
Joe Perches <joe@...ches.com>
Subject: [net-next 5/8] ixgbevf: Convert printks to pr_<level>
Based on the original patch from Joe Perches <joe@...ches.com>
Use the current logging styles, prefix output with "ixgbevf: "
Add #define pr_fmt
Coalesce formats.
-v2 Fix-up to make checkpatch.pl compliant and remove change to
copyright line
CC: Joe Perches <joe@...ches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Tested-by: Sibai Li <sibai.li@...el.com>
---
drivers/net/ethernet/intel/ixgbevf/ethtool.c | 6 +++-
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 27 +++++++++++----------
2 files changed, 18 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbevf/ethtool.c b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
index e29ba45..149fa52 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
@@ -27,6 +27,8 @@
/* ethtool support for ixgbevf */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -549,8 +551,8 @@ static const u32 register_test_patterns[] = {
writel((W & M), (adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
if ((W & M) != (val & M)) { \
- printk(KERN_ERR "set/check reg %04X test failed: got 0x%08X " \
- "expected 0x%08X\n", R, (val & M), (W & M)); \
+ pr_err("set/check reg %04X test failed: got 0x%08X expected " \
+ "0x%08X\n", R, (val & M), (W & M)); \
*data = R; \
writel(before, (adapter->hw.hw_addr + R)); \
return 1; \
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 4c8e199..b2ece53 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -29,6 +29,9 @@
/******************************************************************************
Copyright (c)2006 - 2007 Myricom, Inc. for some LRO specific code
******************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/bitops.h>
#include <linux/module.h>
@@ -1437,7 +1440,7 @@ static int ixgbevf_write_uc_addr_list(struct net_device *netdev)
int count = 0;
if ((netdev_uc_count(netdev)) > 10) {
- printk(KERN_ERR "Too many unicast filters - No Space\n");
+ pr_err("Too many unicast filters - No Space\n");
return -ENOSPC;
}
@@ -2135,7 +2138,7 @@ static int ixgbevf_init_interrupt_scheme(struct ixgbevf_adapter *adapter)
err = ixgbevf_alloc_queues(adapter);
if (err) {
- printk(KERN_ERR "Unable to allocate memory for queues\n");
+ pr_err("Unable to allocate memory for queues\n");
goto err_alloc_queues;
}
@@ -2189,7 +2192,7 @@ static int __devinit ixgbevf_sw_init(struct ixgbevf_adapter *adapter)
} else {
err = hw->mac.ops.init_hw(hw);
if (err) {
- printk(KERN_ERR "init_shared_code failed: %d\n", err);
+ pr_err("init_shared_code failed: %d\n", err);
goto out;
}
}
@@ -2630,8 +2633,8 @@ static int ixgbevf_open(struct net_device *netdev)
* the vf can't start. */
if (hw->adapter_stopped) {
err = IXGBE_ERR_MBX;
- printk(KERN_ERR "Unable to start - perhaps the PF"
- " Driver isn't up yet\n");
+ pr_err("Unable to start - perhaps the PF Driver isn't "
+ "up yet\n");
goto err_setup_reset;
}
}
@@ -2842,10 +2845,8 @@ static bool ixgbevf_tx_csum(struct ixgbevf_adapter *adapter,
break;
default:
if (unlikely(net_ratelimit())) {
- printk(KERN_WARNING
- "partial checksum but "
- "proto=%x!\n",
- skb->protocol);
+ pr_warn("partial checksum but "
+ "proto=%x!\n", skb->protocol);
}
break;
}
@@ -3414,7 +3415,7 @@ static int __devinit ixgbevf_probe(struct pci_dev *pdev,
memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->dev_addr)) {
- printk(KERN_ERR "invalid MAC address\n");
+ pr_err("invalid MAC address\n");
err = -EIO;
goto err_sw_init;
}
@@ -3535,10 +3536,10 @@ static struct pci_driver ixgbevf_driver = {
static int __init ixgbevf_init_module(void)
{
int ret;
- printk(KERN_INFO "ixgbevf: %s - version %s\n", ixgbevf_driver_string,
- ixgbevf_driver_version);
+ pr_info("%s - version %s\n", ixgbevf_driver_string,
+ ixgbevf_driver_version);
- printk(KERN_INFO "%s\n", ixgbevf_copyright);
+ pr_info("%s\n", ixgbevf_copyright);
ret = pci_register_driver(&ixgbevf_driver);
return ret;
--
1.7.6.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists