[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1321447892-14381-2-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Wed, 16 Nov 2011 04:51:25 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jesse Brandeburg <jesse.brandeburg@...el.com>,
netdev@...r.kernel.org, gospo@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 1/8] e1000e: convert to real ndo_set_rx_mode
From: Jesse Brandeburg <jesse.brandeburg@...el.com>
Commit afc4b13d (net: remove use of ndo_set_multicast_list in
drivers) changed e1000e to use the ndo_set_rx_mode entry point,
but didn't implement the unicast address programming
functionality. Implement it to achieve the ability to add unicast
addresses.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 158 ++++++++++++++++++++--------
1 files changed, 114 insertions(+), 44 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index a855db1..80e69d3 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3113,79 +3113,147 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
}
/**
- * e1000_update_mc_addr_list - Update Multicast addresses
- * @hw: pointer to the HW structure
- * @mc_addr_list: array of multicast addresses to program
- * @mc_addr_count: number of multicast addresses to program
+ * e1000e_write_mc_addr_list - write multicast addresses to MTA
+ * @netdev: network interface device structure
*
- * Updates the Multicast Table Array.
- * The caller must have a packed mc_addr_list of multicast addresses.
+ * Writes multicast address list to the MTA hash table.
+ * Returns: -ENOMEM on failure
+ * 0 on no addresses written
+ * X on writing X addresses to MTA
+ */
+static int e1000e_write_mc_addr_list(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ u8 *mta_list;
+ int i;
+
+ if (netdev_mc_empty(netdev)) {
+ /* nothing to program, so clear mc list */
+ hw->mac.ops.update_mc_addr_list(hw, NULL, 0);
+ return 0;
+ }
+
+ mta_list = kzalloc(netdev_mc_count(netdev) * ETH_ALEN, GFP_ATOMIC);
+ if (!mta_list)
+ return -ENOMEM;
+
+ /* update_mc_addr_list expects a packed array of only addresses. */
+ i = 0;
+ netdev_for_each_mc_addr(ha, netdev)
+ memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
+
+ hw->mac.ops.update_mc_addr_list(hw, mta_list, i);
+ kfree(mta_list);
+
+ return netdev_mc_count(netdev);
+}
+
+/**
+ * e1000e_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ * 0 on no addresses written
+ * X on writing X addresses to the RAR table
**/
-static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
- u32 mc_addr_count)
+static int e1000e_write_uc_addr_list(struct net_device *netdev)
{
- hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned int rar_entries = hw->mac.rar_entry_count;
+ int count = 0;
+
+ /* save a rar entry for our hardware address */
+ rar_entries--;
+
+ /* save a rar entry for the LAA workaround */
+ if (adapter->flags & FLAG_RESET_OVERWRITES_LAA)
+ rar_entries--;
+
+ /* return ENOMEM indicating insufficient memory for addresses */
+ if (netdev_uc_count(netdev) > rar_entries)
+ return -ENOMEM;
+
+ if (!netdev_uc_empty(netdev) && rar_entries) {
+ struct netdev_hw_addr *ha;
+
+ /*
+ * write the addresses in reverse order to avoid write
+ * combining
+ */
+ netdev_for_each_uc_addr(ha, netdev) {
+ if (!rar_entries)
+ break;
+ e1000e_rar_set(hw, ha->addr, rar_entries--);
+ count++;
+ }
+ }
+
+ /* zero out the remaining RAR entries not used above */
+ for (; rar_entries > 0; rar_entries--) {
+ ew32(RAH(rar_entries), 0);
+ ew32(RAL(rar_entries), 0);
+ }
+ e1e_flush();
+
+ return count;
}
/**
- * e1000_set_multi - Multicast and Promiscuous mode set
+ * e1000e_set_rx_mode - secondary unicast, Multicast and Promiscuous mode set
* @netdev: network interface device structure
*
- * The set_multi entry point is called whenever the multicast address
- * list or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper multicast,
+ * The ndo_set_rx_mode entry point is called whenever the unicast or multicast
+ * address list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
* promiscuous mode, and all-multi behavior.
**/
-static void e1000_set_multi(struct net_device *netdev)
+static void e1000e_set_rx_mode(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- struct netdev_hw_addr *ha;
- u8 *mta_list;
u32 rctl;
/* Check for Promiscuous and All Multicast modes */
-
rctl = er32(RCTL);
+ /* clear the affected bits */
+ rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
+
if (netdev->flags & IFF_PROMISC) {
rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
- rctl &= ~E1000_RCTL_VFE;
/* Do not hardware filter VLANs in promisc mode */
e1000e_vlan_filter_disable(adapter);
} else {
+ int count;
if (netdev->flags & IFF_ALLMULTI) {
rctl |= E1000_RCTL_MPE;
- rctl &= ~E1000_RCTL_UPE;
} else {
- rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
+ /*
+ * Write addresses to the MTA, if the attempt fails
+ * then we should just turn on promiscuous mode so
+ * that we can at least receive multicast traffic
+ */
+ count = e1000e_write_mc_addr_list(netdev);
+ if (count < 0)
+ rctl |= E1000_RCTL_MPE;
}
e1000e_vlan_filter_enable(adapter);
- }
-
- ew32(RCTL, rctl);
-
- if (!netdev_mc_empty(netdev)) {
- int i = 0;
-
- mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
- if (!mta_list)
- return;
-
- /* prepare a packed array of only addresses. */
- netdev_for_each_mc_addr(ha, netdev)
- memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
-
- e1000_update_mc_addr_list(hw, mta_list, i);
- kfree(mta_list);
- } else {
/*
- * if we're called from probe, we might not have
- * anything to do here, so clear out the list
+ * Write addresses to available RAR registers, if there is not
+ * sufficient space to store all the addresses then enable
+ * unicast promiscuous mode
*/
- e1000_update_mc_addr_list(hw, NULL, 0);
+ count = e1000e_write_uc_addr_list(netdev);
+ if (count < 0)
+ rctl |= E1000_RCTL_UPE;
}
+ ew32(RCTL, rctl);
+
if (netdev->features & NETIF_F_HW_VLAN_RX)
e1000e_vlan_strip_enable(adapter);
else
@@ -3198,7 +3266,7 @@ static void e1000_set_multi(struct net_device *netdev)
**/
static void e1000_configure(struct e1000_adapter *adapter)
{
- e1000_set_multi(adapter->netdev);
+ e1000e_set_rx_mode(adapter->netdev);
e1000_restore_vlan(adapter);
e1000_init_manageability_pt(adapter);
@@ -5331,7 +5399,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
if (wufc) {
e1000_setup_rctl(adapter);
- e1000_set_multi(netdev);
+ e1000e_set_rx_mode(netdev);
/* turn on all-multi mode if wake on multicast is enabled */
if (wufc & E1000_WUFC_MC) {
@@ -5884,7 +5952,7 @@ static const struct net_device_ops e1000e_netdev_ops = {
.ndo_stop = e1000_close,
.ndo_start_xmit = e1000_xmit_frame,
.ndo_get_stats64 = e1000e_get_stats64,
- .ndo_set_rx_mode = e1000_set_multi,
+ .ndo_set_rx_mode = e1000e_set_rx_mode,
.ndo_set_mac_address = e1000_set_mac,
.ndo_change_mtu = e1000_change_mtu,
.ndo_do_ioctl = e1000_ioctl,
@@ -6076,6 +6144,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
NETIF_F_TSO6 |
NETIF_F_HW_CSUM);
+ netdev->priv_flags |= IFF_UNICAST_FLT;
+
if (pci_using_dac) {
netdev->features |= NETIF_F_HIGHDMA;
netdev->vlan_features |= NETIF_F_HIGHDMA;
--
1.7.6.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists