netdev - sky2 tx watchdog timeout with 1Gb speed

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20111120232118.GA29748@ntm.wq.cz>
Date:	Mon, 21 Nov 2011 00:21:18 +0100
From:	Milan Kocian <milon@...cz>
To:	netdev@...r.kernel.org
Subject: sky2 tx watchdog timeout with 1Gb speed

hi all,

I switched my home pc from 100Mb/s to 1000Mb/s and I see 
this warning below.

The original kernel was 2.6.39.4 then I tested 3.1.1 with the same
result. (self compiled 32bit vanilla). The workaround is to force 10/100 speed
on my new switch (hp).

lspci:

03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 13)
        Subsystem: Giga-byte Technology Device e000
        Flags: bus master, fast devsel, latency 0, IRQ 45
        Memory at f5000000 (64-bit, non-prefetchable) [size=16K]
        I/O ports at 9000 [size=256]
        [virtual] Expansion ROM at 80300000 [disabled] [size=128K]
        Capabilities: [48] Power Management version 3
        Capabilities: [50] Vital Product Data
        Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [e0] Express Legacy Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Kernel driver in use: sky2


Nov 20 21:32:54 milu kernel: sky2 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
Nov 20 21:35:29 milu kernel: ------------[ cut here ]------------
Nov 20 21:35:29 milu kernel: WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x1fa/0x206()
Nov 20 21:35:29 milu kernel: Hardware name: 965GM-S2
Nov 20 21:35:29 milu kernel: NETDEV WATCHDOG: eth0 (sky2): transmit queue 0 timed out
Nov 20 21:35:29 milu kernel: Modules linked in: parport_pc parport fuse nfsd ipv6 nfs lockd auth_rpcgss nfs_acl sunrpc usbhid snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_intel8x0 sg snd_ac97_codec sr_mod ac97_bus cdrom sky2 snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss intel_agp snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd bitrev i2c_i801 crc32 intel_gtt uhci_hcd i2c_core ehci_hcd soundcore usbcore agpgart evdev snd_page_alloc
Nov 20 21:35:29 milu kernel: Pid: 0, comm: swapper Not tainted 3.1.1 #2
Nov 20 21:35:29 milu kernel: Call Trace:
Nov 20 21:35:29 milu kernel: [<c102cd5d>] ? warn_slowpath_common+0x6c/0x94
Nov 20 21:35:29 milu kernel: [<c1254deb>] ? dev_watchdog+0x1fa/0x206
Nov 20 21:35:29 milu kernel: [<c1254deb>] ? dev_watchdog+0x1fa/0x206
Nov 20 21:35:29 milu kernel: [<c102ce0e>] ? warn_slowpath_fmt+0x33/0x37
Nov 20 21:35:29 milu kernel: [<c1254deb>] ? dev_watchdog+0x1fa/0x206
Nov 20 21:35:29 milu kernel: [<c1254bf1>] ? qdisc_reset+0x2d/0x2d
Nov 20 21:35:29 milu kernel: [<c1036434>] ? run_timer_softirq+0xc6/0x1c4
Nov 20 21:35:29 milu kernel: [<c1027e9b>] ? run_rebalance_domains+0x148/0x169
Nov 20 21:35:29 milu kernel: [<c103163b>] ? __do_softirq+0x6e/0xea
Nov 20 21:35:29 milu kernel: [<c10315cd>] ? remote_softirq_receive+0x11/0x11
Nov 20 21:35:29 milu kernel: <IRQ>  [<c1031906>] ? irq_exit+0x5b/0x67
Nov 20 21:35:29 milu kernel: [<c101631f>] ? smp_apic_timer_interrupt+0x51/0x81
Nov 20 21:35:29 milu kernel: [<c12ccd96>] ? apic_timer_interrupt+0x2a/0x30
Nov 20 21:35:29 milu kernel: [<c13f007b>] ? asus_hides_smbus_hostbridge+0xcb/0x249
Nov 20 21:35:29 milu kernel: [<c1008732>] ? mwait_idle+0x41/0x51
Nov 20 21:35:29 milu kernel: [<c10015d8>] ? cpu_idle+0x74/0x84
Nov 20 21:35:29 milu kernel: [<c13d6638>] ? start_kernel+0x28a/0x28f
Nov 20 21:35:29 milu kernel: [<c13d615e>] ? loglevel+0x2b/0x2b
Nov 20 21:35:29 milu kernel: ---[ end trace ef84175f674c7842 ]---
Nov 20 21:35:29 milu kernel: sky2 0000:03:00.0: eth0: tx timeout
Nov 20 21:35:29 milu kernel: sky2 0000:03:00.0: eth0: transmit ring 52 .. 30 report=52 done=52
Nov 20 21:35:32 milu kernel: sky2 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
Nov 20 21:37:13 milu kernel: sky2 0000:03:00.0: eth0: tx timeout
Nov 20 21:37:13 milu kernel: sky2 0000:03:00.0: eth0: transmit ring 37 .. 15 report=37 done=37
Nov 20 21:37:16 milu kernel: sky2 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both

Any suggestion ? As I said its home machine so I can test what you want :-).

best regards,

-- 
Milan Kocian
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html