[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20111122074030.ac247a36.shimoda.hiroaki@gmail.com>
Date: Tue, 22 Nov 2011 07:40:30 +0900
From: Hiroaki SHIMODA <shimoda.hiroaki@...il.com>
To: mcarlson@...adcom.com
Cc: davem@...emloft.net, mchan@...adcom.com, eric.dumazet@...il.com,
netdev@...r.kernel.org
Subject: Re: [PATCH net-next] tg3: Fix advertisement handling
On Mon, 21 Nov 2011 11:29:08 -0800
"Matt Carlson" <mcarlson@...adcom.com> wrote:
> On Sun, Nov 20, 2011 at 03:07:20PM -0800, Hiroaki SHIMODA wrote:
> > Commit 28011cf19b (net: Add ethtool to mii advertisment conversion
> > helpers) added a helper function ethtool_adv_to_mii_100bt() and
> > tg3_copper_is_advertising_all(), tg3_phy_autoneg_cfg() were
> > modified to use this.
> > Before that commit, ethtool to mii advertisement conversion was
> > done wrt speed, but now pause operation is also taken account.
> > So, in tg3_copper_is_advertising_all(), below condition becomes
> > true and this makes link up fails.
> >
> > if ((adv_reg & ADVERTISE_ALL) != all_mask)
> > return 0;
> >
> > To fix this add ADVERTISE_ALL bit and operation to cap speed.
> >
> > Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@...il.com>
>
> The root cause of this problem can actually be fixed by the following
> patch:
>
> diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
> index 024ca1d..53e501c 100644
> --- a/drivers/net/ethernet/broadcom/tg3.c
> +++ b/drivers/net/ethernet/broadcom/tg3.c
> @@ -13192,8 +13192,7 @@ static u32 __devinit tg3_read_otp_phycfg(struct tg3 *tp)
>
> static void __devinit tg3_phy_init_link_config(struct tg3 *tp)
> {
> - u32 adv = ADVERTISED_Autoneg |
> - ADVERTISED_Pause;
> + u32 adv = ADVERTISED_Autoneg;
>
> if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY))
> adv |= ADVERTISED_1000baseT_Half |
>
> Could you add it as part of this patch?
Ok.
>
> Technically the above patch should fix the problem, but this patch makes
> the code clearer, should the same type of error pop up in the future.
>
> More comments below.
>
> > ---
> > drivers/net/ethernet/broadcom/tg3.c | 4 ++--
> > 1 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
> > index 024ca1d..c00e648 100644
> > --- a/drivers/net/ethernet/broadcom/tg3.c
> > +++ b/drivers/net/ethernet/broadcom/tg3.c
> > @@ -3594,7 +3594,7 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl)
> > u32 val, new_adv;
> >
> > new_adv = ADVERTISE_CSMA;
> > - new_adv |= ethtool_adv_to_mii_100bt(advertise);
> > + new_adv |= ethtool_adv_to_mii_100bt(advertise) & ADVERTISE_ALL;
> > new_adv |= tg3_advert_flowctrl_1000T(flowctrl);
> >
> > err = tg3_writephy(tp, MII_ADVERTISE, new_adv);
> > @@ -3783,7 +3783,7 @@ static int tg3_copper_is_advertising_all(struct tg3 *tp, u32 mask)
> > if (tg3_readphy(tp, MII_ADVERTISE, &adv_reg))
> > return 0;
> >
> > - if ((adv_reg & ADVERTISE_ALL) != all_mask)
> > + if ((adv_reg & ADVERTISE_ALL) != (all_mask & ADVERTISE_ALL))
>
> Rather than ANDing the all_mask here, can you make it look like the 1st
> hunk of your patch by ANDing the value returned by
> ethtool_adv_to_mii_100bt()? I plan on further changes in this area and
> the uniformity will help.
Ok.
I'll send V2 with Eric's Reported-by tag.
Thanks.
>
> > return 0;
> >
> > if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY)) {
> >
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists