| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 22 Nov 2011 11:23:36 -0800
From: David Decotigny <david.decotigny@...gle.com>
To: Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
Jesse Brandeburg <jesse.brandeburg@...el.com>,
Bruce Allan <bruce.w.allan@...el.com>,
Carolyn Wyborny <carolyn.wyborny@...el.com>,
Don Skidmore <donald.c.skidmore@...el.com>,
Greg Rose <gregory.v.rose@...el.com>,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@...el.com>,
Alex Duyck <alexander.h.duyck@...el.com>,
John Ronciak <john.ronciak@...el.com>,
e1000-devel@...ts.sourceforge.net, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: David Decotigny <david.decotigny@...gle.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <eric.dumazet@...il.com>,
Ian Campbell <ian.campbell@...rix.com>,
Paul Gortmaker <paul.gortmaker@...driver.com>
Subject: [PATCH net-next v2 2/4] net-e1000e: ethtool loopback support
This allows ethtool to activate loopback via the get/set_features API.
Tested:
- HW = 80003ES2LAN (copper), x86_64
- incoming external 200Mbps, loopback on/off, verified that incoming
stream resumed
- incoming external 200Mbps, ifconfig down, loopback on/off,
ifconfig up, verified that incoming stream resumed
- incoming external 200Mbps, loopback on, ifconfig down, loopback
off, ifconfig up, verified that incoming stream resumed
- in each case, ifconfig rx&tx errors = 0 but rx_dropped can be != 0
- the same with a pktgen when loopback is enabled: verifying that
tx_packets = rx_packets + rx_missed_errors, and that tx_packets is
very close to pktgen_packets (1 or 2 packets difference, not
more). Note that rx_missed_errors >> 0
- artificially simulated failure of enabling loopback -> reported by
set_features and kept loopback feature marked as not configured.
Signed-off-by: David Decotigny <david.decotigny@...gle.com>
---
drivers/net/ethernet/intel/e1000e/e1000.h | 2 ++
drivers/net/ethernet/intel/e1000e/ethtool.c | 6 +++---
drivers/net/ethernet/intel/e1000e/netdev.c | 21 ++++++++++++++++++++-
3 files changed, 25 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 9fe18d1..786cf31 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -485,6 +485,8 @@ extern const char e1000e_driver_version[];
extern void e1000e_check_options(struct e1000_adapter *adapter);
extern void e1000e_set_ethtool_ops(struct net_device *netdev);
+extern int e1000_loopback_setup(struct e1000_adapter *adapter);
+extern void e1000_loopback_cleanup(struct e1000_adapter *adapter);
extern int e1000e_up(struct e1000_adapter *adapter);
extern void e1000e_down(struct e1000_adapter *adapter);
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index fb2c28e..259add2 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -1410,7 +1410,7 @@ static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter)
return 0;
}
-static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
+int e1000_loopback_setup(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
u32 rctl;
@@ -1438,7 +1438,7 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
return 7;
}
-static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
+void e1000_loopback_cleanup(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
u32 rctl;
@@ -1593,7 +1593,7 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
if (*data)
goto out;
- *data = e1000_setup_loopback_test(adapter);
+ *data = e1000_loopback_setup(adapter);
if (*data)
goto err_loopback;
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index a83a108..ca45a12 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3256,6 +3256,14 @@ static void e1000_configure(struct e1000_adapter *adapter)
e1000_configure_rx(adapter);
adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring),
GFP_KERNEL);
+
+ if (adapter->netdev->features & NETIF_F_LOOPBACK) {
+ if (e1000_loopback_setup(adapter)) {
+ e_warn("Could not activate loopback mode\n");
+ adapter->netdev->features &= ~NETIF_F_LOOPBACK;
+ } else
+ e_info("Loopback mode activated\n");
+ }
}
/**
@@ -5910,7 +5918,7 @@ static int e1000_set_features(struct net_device *netdev,
adapter->flags |= FLAG_TSO_FORCE;
if (!(changed & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX |
- NETIF_F_RXCSUM)))
+ NETIF_F_RXCSUM | NETIF_F_LOOPBACK)))
return 0;
/* We will make sure to return 1 below so that we can change
@@ -5919,6 +5927,14 @@ static int e1000_set_features(struct net_device *netdev,
* overriding it. */
netdev->features = features;
+ /* disable loopback if requested */
+ if ((changed & NETIF_F_LOOPBACK) && (!(features & NETIF_F_LOOPBACK))) {
+ netdev_dbg(netdev, "Disabling loopback mode\n");
+ e1000_loopback_cleanup(adapter);
+ }
+ /* otherwise loopback is enabled via e1000e_reinit_locked
+ * below and each time the device is up'ed */
+
if (netif_running(netdev))
e1000e_reinit_locked(adapter);
else
@@ -6116,6 +6132,9 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* Set user-changeable features (subset of all device features) */
netdev->hw_features = netdev->features;
+ /* Add capabilities, disabled by default */
+ netdev->hw_features |= NETIF_F_LOOPBACK;
+
if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
netdev->features |= NETIF_F_HW_VLAN_FILTER;
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists