[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <201111301256.51123.carsten@wolffcarsten.de>
Date: Wed, 30 Nov 2011 12:56:49 +0100
From: Carsten Wolff <carsten@...ffcarsten.de>
To: Francois Romieu <romieu@...zoreil.com>
Cc: Markus Feldmann <feldmann_markus@....de>, netdev@...r.kernel.org
Subject: Re: Daughterboard Jetway JAD3RTLANG with three RTL-8110SC/8169SC Gigabit Ethernet is curious
Hi,
On Wednesday 30 November 2011, Francois Romieu wrote:
> Markus Feldmann <feldmann_markus@....de> :
> [...]
>
> > You mean the latest Linux kernel was patched for a better
> > initialization? At the moment i am using the kernel 3.0.8. As i
> > understood the firmware must be loaded at every power on.
>
> What do you mean ? Afaik there is no out-of-driver firmware for the
> (old) 8169sc.
>
> Can either of you or Carsten compare and send 'lspci -vv' before and
> after windows installs ?
I'm sorry, I don't have that from before the windows install, the whole thing
happened 2 years ago for me and I can not go back, obviously.
Anyway, this is the current lcpci ouput:
00:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC
Gigabit Ethernet (rev 10)
Subsystem: Jetway Information Co., Ltd. Device 10ec
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at bc00 [size=256]
Region 1: Memory at dfaff000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at df900000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: r8169
00:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC
Gigabit Ethernet (rev 10)
Subsystem: Jetway Information Co., Ltd. Device 10ec
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at dfafe000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at df920000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: r8169
00:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC
Gigabit Ethernet (rev 10)
Subsystem: Jetway Information Co., Ltd. Device 10ec
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at b400 [size=256]
Region 1: Memory at dfafd000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at df940000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: r8169
Regards
Carsten
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists