| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20111130.224156.2082895087108185796.davem@davemloft.net>
Date: Wed, 30 Nov 2011 22:41:56 -0500 (EST)
From: David Miller <davem@...emloft.net>
To: netdev@...r.kernel.org
Subject: [PATCH 7/7] atm: clip: Use device neigh support on top of
"arp_tbl".
Instead of instantiating an entire new neigh_table instance
just for ATM handling, use the neigh device private facility.
Signed-off-by: David S. Miller <davem@...emloft.net>
---
include/net/atmclip.h | 5 ---
net/atm/clip.c | 86 ++++++++-----------------------------------------
net/ipv4/arp.c | 5 ---
net/ipv4/route.c | 10 +----
4 files changed, 16 insertions(+), 90 deletions(-)
diff --git a/include/net/atmclip.h b/include/net/atmclip.h
index 852a3b2..5865924 100644
--- a/include/net/atmclip.h
+++ b/include/net/atmclip.h
@@ -41,17 +41,12 @@ struct atmarp_entry {
struct neighbour *neigh; /* neighbour back-pointer */
};
-
#define PRIV(dev) ((struct clip_priv *) netdev_priv(dev))
-
struct clip_priv {
int number; /* for convenience ... */
spinlock_t xoff_lock; /* ensures that pop is atomic (SMP) */
struct net_device *next; /* next CLIP interface */
};
-
-extern struct neigh_table *clip_tbl_hook;
-
#endif
diff --git a/net/atm/clip.c b/net/atm/clip.c
index a9d3484..f3b3615 100644
--- a/net/atm/clip.c
+++ b/net/atm/clip.c
@@ -33,6 +33,7 @@
#include <linux/slab.h>
#include <net/route.h> /* for struct rtable and routing */
#include <net/icmp.h> /* icmp_send */
+#include <net/arp.h>
#include <linux/param.h> /* for HZ */
#include <linux/uaccess.h>
#include <asm/byteorder.h> /* for htons etc. */
@@ -287,70 +288,23 @@ static const struct neigh_ops clip_neigh_ops = {
static int clip_constructor(struct neighbour *neigh)
{
struct atmarp_entry *entry = neighbour_priv(neigh);
- struct net_device *dev = neigh->dev;
- struct in_device *in_dev;
- struct neigh_parms *parms;
- pr_debug("(neigh %p, entry %p)\n", neigh, entry);
- neigh->type = inet_addr_type(&init_net, *((__be32 *) neigh->primary_key));
- if (neigh->type != RTN_UNICAST)
+ if (neigh->tbl->family != AF_INET)
return -EINVAL;
- rcu_read_lock();
- in_dev = __in_dev_get_rcu(dev);
- if (!in_dev) {
- rcu_read_unlock();
+ if (neigh->type != RTN_UNICAST)
return -EINVAL;
- }
-
- parms = in_dev->arp_parms;
- __neigh_parms_put(neigh->parms);
- neigh->parms = neigh_parms_clone(parms);
- rcu_read_unlock();
+ neigh->nud_state = NUD_NONE;
neigh->ops = &clip_neigh_ops;
- neigh->output = neigh->nud_state & NUD_VALID ?
- neigh->ops->connected_output : neigh->ops->output;
+ neigh->output = neigh->ops->output;
entry->neigh = neigh;
entry->vccs = NULL;
entry->expires = jiffies - 1;
+
return 0;
}
-static u32 clip_hash(const void *pkey, const struct net_device *dev, __u32 rnd)
-{
- return jhash_2words(*(u32 *) pkey, dev->ifindex, rnd);
-}
-
-static struct neigh_table clip_tbl = {
- .family = AF_INET,
- .key_len = 4,
- .hash = clip_hash,
- .constructor = clip_constructor,
- .id = "clip_arp_cache",
-
- /* parameters are copied from ARP ... */
- .parms = {
- .tbl = &clip_tbl,
- .base_reachable_time = 30 * HZ,
- .retrans_time = 1 * HZ,
- .gc_staletime = 60 * HZ,
- .reachable_time = 30 * HZ,
- .delay_probe_time = 5 * HZ,
- .queue_len_bytes = 64 * 1024,
- .ucast_probes = 3,
- .mcast_probes = 3,
- .anycast_delay = 1 * HZ,
- .proxy_delay = (8 * HZ) / 10,
- .proxy_qlen = 64,
- .locktime = 1 * HZ,
- },
- .gc_interval = 30 * HZ,
- .gc_thresh1 = 128,
- .gc_thresh2 = 512,
- .gc_thresh3 = 1024,
-};
-
/* @@@ copy bh locking from arp.c -- need to bh-enable atm code before */
/*
@@ -508,7 +462,7 @@ static int clip_setentry(struct atm_vcc *vcc, __be32 ip)
rt = ip_route_output(&init_net, ip, 0, 1, 0);
if (IS_ERR(rt))
return PTR_ERR(rt);
- neigh = __neigh_lookup(&clip_tbl, &ip, rt->dst.dev, 1);
+ neigh = __neigh_lookup(&arp_tbl, &ip, rt->dst.dev, 1);
ip_rt_put(rt);
if (!neigh)
return -ENOMEM;
@@ -529,7 +483,8 @@ static int clip_setentry(struct atm_vcc *vcc, __be32 ip)
}
static const struct net_device_ops clip_netdev_ops = {
- .ndo_start_xmit = clip_start_xmit,
+ .ndo_start_xmit = clip_start_xmit,
+ .ndo_neigh_construct = clip_constructor,
};
static void clip_setup(struct net_device *dev)
@@ -590,10 +545,8 @@ static int clip_device_event(struct notifier_block *this, unsigned long event,
if (!net_eq(dev_net(dev), &init_net))
return NOTIFY_DONE;
- if (event == NETDEV_UNREGISTER) {
- neigh_ifdown(&clip_tbl, dev);
+ if (event == NETDEV_UNREGISTER)
return NOTIFY_DONE;
- }
/* ignore non-CLIP devices */
if (dev->type != ARPHRD_ATM || dev->netdev_ops != &clip_netdev_ops)
@@ -867,6 +820,9 @@ static void *clip_seq_sub_iter(struct neigh_seq_state *_state,
{
struct clip_seq_state *state = (struct clip_seq_state *)_state;
+ if (n->dev->type != ARPHRD_ATM)
+ return NULL;
+
return clip_seq_vcc_walk(state, neighbour_priv(n), pos);
}
@@ -874,7 +830,7 @@ static void *clip_seq_start(struct seq_file *seq, loff_t * pos)
{
struct clip_seq_state *state = seq->private;
state->ns.neigh_sub_iter = clip_seq_sub_iter;
- return neigh_seq_start(seq, pos, &clip_tbl, NEIGH_SEQ_NEIGH_ONLY);
+ return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_NEIGH_ONLY);
}
static int clip_seq_show(struct seq_file *seq, void *v)
@@ -920,9 +876,6 @@ static void atm_clip_exit_noproc(void);
static int __init atm_clip_init(void)
{
- neigh_table_init_no_netlink(&clip_tbl);
-
- clip_tbl_hook = &clip_tbl;
register_atm_ioctl(&clip_ioctl_ops);
register_netdevice_notifier(&clip_dev_notifier);
register_inetaddr_notifier(&clip_inet_notifier);
@@ -959,12 +912,6 @@ static void atm_clip_exit_noproc(void)
*/
del_timer_sync(&idle_timer);
- /* Next, purge the table, so that the device
- * unregister loop below does not hang due to
- * device references remaining in the table.
- */
- neigh_ifdown(&clip_tbl, NULL);
-
dev = clip_devs;
while (dev) {
next = PRIV(dev)->next;
@@ -972,11 +919,6 @@ static void atm_clip_exit_noproc(void)
free_netdev(dev);
dev = next;
}
-
- /* Now it is safe to fully shutdown whole table. */
- neigh_table_clear(&clip_tbl);
-
- clip_tbl_hook = NULL;
}
static void __exit atm_clip_exit(void)
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index fd4b3e8..ff324eb 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -112,11 +112,6 @@
#include <net/arp.h>
#include <net/ax25.h>
#include <net/netrom.h>
-#if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
-#include <net/atmclip.h>
-struct neigh_table *clip_tbl_hook;
-EXPORT_SYMBOL(clip_tbl_hook);
-#endif
#include <asm/system.h>
#include <linux/uaccess.h>
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index fb47c8f..9a20663 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -108,7 +108,6 @@
#ifdef CONFIG_SYSCTL
#include <linux/sysctl.h>
#endif
-#include <net/atmclip.h>
#include <net/secure_seq.h>
#define RT_FL_TOS(oldflp4) \
@@ -1013,23 +1012,18 @@ static int slow_chain_length(const struct rtable *head)
static struct neighbour *ipv4_neigh_lookup(const struct dst_entry *dst, const void *daddr)
{
- struct neigh_table *tbl = &arp_tbl;
static const __be32 inaddr_any = 0;
struct net_device *dev = dst->dev;
const __be32 *pkey = daddr;
struct neighbour *n;
-#if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
- if (dev->type == ARPHRD_ATM)
- tbl = clip_tbl_hook;
-#endif
if (dev->flags & (IFF_LOOPBACK | IFF_POINTOPOINT))
pkey = &inaddr_any;
- n = __ipv4_neigh_lookup(tbl, dev, *(__force u32 *)pkey);
+ n = __ipv4_neigh_lookup(&arp_tbl, dev, *(__force u32 *)pkey);
if (n)
return n;
- return neigh_create(tbl, pkey, dev);
+ return neigh_create(&arp_tbl, pkey, dev);
}
static int rt_bind_neighbour(struct rtable *rt)
--
1.7.6.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists