[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20111207085702.GE5550@S2100-06.ap.freescale.net>
Date: Wed, 7 Dec 2011 16:57:03 +0800
From: Shawn Guo <shawn.guo@...escale.com>
To: Lothar Waßmann <LW@...O-electronics.de>
CC: Baruch Siach <baruch@...s.co.il>, <netdev@...r.kernel.org>,
Shawn Guo <shawn.guo@...aro.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH][NET] several cleanups and bugfixes for fec.c: don't
munge MAC address from platform data
On Tue, Dec 06, 2011 at 02:44:44PM +0100, Lothar Waßmann wrote:
> Hi,
>
> Baruch Siach writes:
> > Hi Lothar,
> >
> > On Tue, Dec 06, 2011 at 11:27:13AM +0100, Lothar Waßmann wrote:
> > > When the MAC address is supplied via platform_data it should be OK as
> > > it is and should not be modified in case of a dual FEC setup.
> > > Also copying the MAC from platform_data to the single 'macaddr'
> > > variable will overwrite the MAC for the first interface in case of a
> > > dual FEC setup.
> > >
> > > Signed-off-by: Lothar Waßmann <LW@...O-electronics.de>
> > > ---
> > > drivers/net/ethernet/freescale/fec.c | 2 +-
> > > 1 files changed, 1 insertions(+), 1 deletions(-)
> > >
> > > diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
> > > index e2b5ce6..11534b9 100644
> > > --- a/drivers/net/ethernet/freescale/fec.c
> > > +++ b/drivers/net/ethernet/freescale/fec.c
> > > @@ -818,7 +818,7 @@ static void __inline__ fec_get_mac(struct net_device *ndev)
> > > iap = (unsigned char *)FEC_FLASHMAC;
> > > #else
> > > if (pdata)
> > > - memcpy(iap, pdata->mac, ETH_ALEN);
> > > + iap = (unsigned char *)&pdata->mac;
> >
> > Since pdata might point to __initdata struct, you must hold a copy of its
> > content.
> >
As iap will anyway be copied to ndev->dev_addr after that, it may still
be fine to take this patch, for obviously for different reason.
> No. platform_data must be present during the life time of a driver
> using it and thus must never be __initdata!
>
Then we need to fix a lot of imx/mxc platform codes, mach-mx28evk.c
is the one for this case.
--
Regards,
Shawn
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists