[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Tue, 13 Dec 2011 10:10:08 +0800
From: Richard Zhao <richard.zhao@...escale.com>
To: Veli-Pekka Peltola <veli-pekka.peltola@...egiga.com>,
<s.hauer@...gutronix.de>, <shawn.guo@...aro.org>
CC: Fabio Estevam <festevam@...il.com>, <patches@...aro.org>,
<netdev@...r.kernel.org>, <jgq516@...il.com>,
<eric.miao@...aro.org>, <davem@...emloft.net>,
Richard Zhao <richard.zhao@...aro.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 1/1] net/fec: add KSZ9021RN phy fixup
On Mon, Dec 12, 2011 at 04:42:07PM +0200, Veli-Pekka Peltola wrote:
> On 12/12/2011 03:51 PM, Richard Zhao wrote:
> >On Mon, Dec 12, 2011 at 10:56:48AM -0200, Fabio Estevam wrote:
> >>On Mon, Dec 12, 2011 at 8:09 AM, Richard Zhao<richard.zhao@...aro.org> wrote:
> >>>For imx6q sabrelite board, set phy RGMII pad skew.
> >>>
> >>>Signed-off-by: Richard Zhao<richard.zhao@...aro.org>
> >>>---
> >>> drivers/net/ethernet/freescale/fec.c | 19 +++++++++++++++++++
> >>> 1 files changed, 19 insertions(+), 0 deletions(-)
> >>>
> >>>diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
> >>>index 112af9b..d3b4463 100644
> >>>--- a/drivers/net/ethernet/freescale/fec.c
> >>>+++ b/drivers/net/ethernet/freescale/fec.c
> >>>@@ -1513,6 +1513,21 @@ static inline void fec_reset_phy(struct platform_device *pdev)
> >>> }
> >>> #endif /* CONFIG_OF */
> >>>
> >>>+/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
> >>>+static int ksz9021rn_phy_fixup(struct phy_device *phydev)
> >>>+{
> >>>+ /* min rx data delay */
> >>>+ phy_write(phydev, 0x0b, 0x8105);
> >>>+ phy_write(phydev, 0x0c, 0x0000);
> >>>+
> >>>+ /* max rx/tx clock delay, min rx/tx control delay */
> >>>+ phy_write(phydev, 0x0b, 0x8104);
> >>>+ phy_write(phydev, 0x0c, 0xf0f0);
> >>>+ phy_write(phydev, 0x0b, 0x104);
> >>>+
> >>>+ return 0;
> >>
> >>This should go to drivers/net/phy/micrel.c.
> >Why? It's specific to fec.
>
> For me it seems to be a board specific and should be placed to the
> machine file.
By converting to DT, machine code's becoming common too. I feel hard to
find a place. Put it in imx6q_init_machine?
Sascha & Shawn, Could you give comments here?
> Please include linux/micrel_phy.h and use proper
> defines (PHY_ID_KSZ9021, MICREL_PHY_ID_MASK).
right. thanks.
Richard
>
> --
> Veli-Pekka Peltola
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists