netdev - Bug in smsc911x

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-id: <OF308AD908.27774DC2-ON80257980.0046416E-80257980.004A4357@eu.necel.com>
Date:	Mon, 09 Jan 2012 13:31:09 +0000
From:	phil.edworthy@...esas.com
To:	netdev@...r.kernel.org
Cc:	Robert Marklund <robert.marklund@...ricsson.com>,
	Linus Walleij <linus.walleij@...aro.org>,
	"David S. Miller" <davem@...emloft.net>,
	Steve Glendinning <steve.glendinning@...c.com>
Subject: Bug in smsc911x_init

Hi,

I've found that commit 3ac3546e5f17248d961ef0f4a27e75564bf71578, 
"net/smsc911x: Always wait for the chip to be ready" can cause init to 
fail. I am working on an out of tree board, but it will affect other 
users. With an smsc 9218 connected to a big endian processor using a 
16-bit bus, we have to wait for the value read from PMT_CTRL to be 0x10000 
rather than 0x1.

However, I am not sure what the correct test should be, as the data sheet 
states that you can't read or write to any other reg until the PMT_CTRL 
READY bit is set. Maybe we can poll until we get a valid result from 
reading BYTE_TEST, and then wait for the PMT_CTRL (endian specific) READY 
bit?

Regards
Phil
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html