[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4F1E90B6.6090106@openwrt.org>
Date: Tue, 24 Jan 2012 12:06:30 +0100
From: Florian Fainelli <florian@...nwrt.org>
To: Alessandro Rubini <rubini@...dd.com>
CC: linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
giancarlo.asnaghi@...com, peppe.cavallaro@...com
Subject: Re: stmmac: fix phy naming inconsistency
Hello Alessandro,
On 01/24/12 10:26, Alessandro Rubini wrote:
> After commit "db8857b stmmac: use an unique MDIO bus name" my
> device stopped being probed because two different names were being
> used in different places. This fixes the inconsistency.
>
> Signed-off-by: Alessandro Rubini<rubini@...dd.com>
> Acked-by: Giancarlo Asnaghi<giancarlo.asnaghi@...com>
> Cc: Giuseppe Cavallaro<peppe.cavallaro@...com>
> Cc: Florian Fainelli<florian@...nwrt.org>
Acked-by: Florian Fainelli <florian@...nwrt.org>
> ---
>
> Before the commit, the phy was identified like this and stuff worked:
>
> PHY ID 20005c90 at 1 IRQ 0 (506:01) active
>
> After that commit, I get
>
> PHY ID 20005c90 at 1 IRQ 0 (STMMAC MII Bus-1:01) active
> PHY stmmac-1:01 not found
>
> In one place, "stmmac" is a static string, on the other the commit
> used the name field of the bus that was "STMMAC MII Bus", so I changed
> this older string to be nicer -- without spaces.
>
> Maybe the name is available where "stmmac" is spelled out, but I
> didn't check.
>
> Now it works for me:
>
> eth1: PHY ID 20005c90 at 1 IRQ 0 (stmmac-1:01) active
> PHY: stmmac-1:01 - Link is Up - 100/Full
>
>
> drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> index 6e712c5..819606e 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> @@ -154,7 +154,7 @@ int stmmac_mdio_register(struct net_device *ndev)
> else
> irqlist = priv->mii_irq;
>
> - new_bus->name = "STMMAC MII Bus";
> + new_bus->name = "stmmac";
> new_bus->read =&stmmac_mdio_read;
> new_bus->write =&stmmac_mdio_write;
> new_bus->reset =&stmmac_mdio_reset;
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists