[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1330908495-3758-3-git-send-email-mchan@broadcom.com>
Date: Sun, 4 Mar 2012 16:48:15 -0800
From: "Michael Chan" <mchan@...adcom.com>
To: davem@...emloft.net
cc: netdev@...r.kernel.org
Subject: [PATCH 3/3 net-next] tg3: Fix poor tx performance on 57766
after MTU change
GRC reset causes the read DMA engine to go into a mode that breaks up
requests into 256 bytes. A PHY reset is required to bring it back to
the normal mode.
Signed-off-by: Michael Chan <mchan@...adcom.com>
---
drivers/net/ethernet/broadcom/tg3.c | 10 ++++++++--
1 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 0da93db..a8490a4 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -12267,7 +12267,7 @@ static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
static int tg3_change_mtu(struct net_device *dev, int new_mtu)
{
struct tg3 *tp = netdev_priv(dev);
- int err;
+ int err, reset_phy = 0;
if (new_mtu < TG3_MIN_MTU || new_mtu > TG3_MAX_MTU(tp))
return -EINVAL;
@@ -12290,7 +12290,13 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu)
tg3_set_mtu(dev, tp, new_mtu);
- err = tg3_restart_hw(tp, 0);
+ /* Reset PHY, otherwise the read DMA engine will be in a mode that
+ * breaks all requests to 256 bytes.
+ */
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57766)
+ reset_phy = 1;
+
+ err = tg3_restart_hw(tp, reset_phy);
if (!err)
tg3_netif_start(tp);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists