Message-Id: <1331022494-12891-5-git-send-email-peppe.cavallaro@st.com>
Date:	Tue,  6 Mar 2012 09:28:14 +0100
From:	Giuseppe CAVALLARO <peppe.cavallaro@...com>
To:	netdev@...r.kernel.org
Cc:	davem@...emloft.net, bhutchings@...arflare.com,
	rayagond@...avyalabs.com,
	Giuseppe Cavallaro <peppe.cavallaro@...com>
Subject: [net-next 4/4] stmmac: add the Energy Efficient Ethernet support.

This patch adds the Energy Efficient Ethernet support.
Please see the driver's documentation for further
information about this support in the driver.

Signed-off-by: Rayagond Kokatanur <rayagond@...avyalabs.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@...com>
---
 drivers/net/ethernet/stmicro/stmmac/common.h       |   27 ++++-
 drivers/net/ethernet/stmicro/stmmac/dwmac1000.h    |   20 +++
 .../net/ethernet/stmicro/stmmac/dwmac1000_core.c   |  101 ++++++++++++-
 .../net/ethernet/stmicro/stmmac/dwmac100_core.c    |    4 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h    |    1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac.h       |    7 +
 .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c   |   46 ++++++
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  157 +++++++++++++++++++-
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |    2 +
 9 files changed, 347 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 0319d64..4e07692 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -95,6 +95,16 @@ struct stmmac_extra_stats {
 	unsigned long poll_n;
 	unsigned long sched_timer_n;
 	unsigned long normal_irq_n;
+	unsigned long mmc_tx_irq_n;
+	unsigned long mmc_rx_irq_n;
+	unsigned long mmc_rx_csum_offload_irq_n;
+	/* EEE */
+	unsigned long irq_receive_pmt_irq_n;
+	unsigned long irq_tx_path_in_lpi_mode_n;
+	unsigned long irq_tx_path_exit_lpi_mode_n;
+	unsigned long irq_rx_path_in_lpi_mode_n;
+	unsigned long irq_rx_path_exit_lpi_mode_n;
+	unsigned long phy_eee_wakeup_error_n;
 };
 
 #define HASH_TABLE_SIZE 64
@@ -151,6 +161,17 @@ enum tx_dma_irq_status {
 	handle_tx_rx = 3,
 };
 
+enum core_specific_irq_mask {
+	core_mmc_tx_irq = 1,
+	core_mmc_rx_irq = 2,
+	core_mmc_rx_csum_offload_irq = 4,
+	core_irq_receive_pmt_irq = 8,
+	core_irq_tx_path_in_lpi_mode = 16,
+	core_irq_tx_path_exit_lpi_mode = 32,
+	core_irq_rx_path_in_lpi_mode = 64,
+	core_irq_rx_path_exit_lpi_mode = 128,
+};
+
 /* DMA HW capabilities */
 struct dma_features {
 	unsigned int mbps_10_100;
@@ -266,7 +287,7 @@ struct stmmac_ops {
 	/* Dump MAC registers */
 	void (*dump_regs) (void __iomem *ioaddr);
 	/* Handle extra events on specific interrupts hw dependent */
-	void (*host_irq_status) (void __iomem *ioaddr);
+	int (*host_irq_status) (void __iomem *ioaddr);
 	/* Multicast filter setting */
 	void (*set_filter) (struct net_device *dev);
 	/* Flow control setting */
@@ -279,6 +300,10 @@ struct stmmac_ops {
 			       unsigned int reg_n);
 	void (*get_umac_addr) (void __iomem *ioaddr, unsigned char *addr,
 			       unsigned int reg_n);
+	void (*set_eee_mode) (void __iomem *ioaddr);
+	void (*reset_eee_mode) (void __iomem *ioaddr);
+	void (*set_eee_timer) (void __iomem *ioaddr, int ls, int tw);
+	void (*set_eee_pls) (void __iomem *ioaddr, int link);
 };
 
 struct mac_link {
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
index cfcef0e..1764f85 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
@@ -36,6 +36,7 @@
 
 #define GMAC_INT_STATUS		0x00000038	/* interrupt status register */
 enum dwmac1000_irq_status {
+	lpiis_irq = 0x400,
 	time_stamp_irq = 0x0200,
 	mmc_rx_csum_offload_irq = 0x0080,
 	mmc_tx_irq = 0x0040,
@@ -60,6 +61,25 @@ enum power_event {
 	power_down = 0x00000001,
 };
 
+/* Energy Efficient Ethernet (EEE)
+ *
+ * LPI status, timer and control register offset
+ */
+#define LPI_CTRL_STATUS	0x0030
+#define LPI_TIMER_CTRL	0x0034
+
+/* LPI control and status defines */
+#define LPI_CTRL_STATUS_LPITXA	0x00080000	/* Enable LPI TX Automate */
+#define LPI_CTRL_STATUS_PLSEN	0x00040000	/* Enable PHY Link Status */
+#define LPI_CTRL_STATUS_PLS	0x00020000	/* PHY Link Status */
+#define LPI_CTRL_STATUS_LPIEN	0x00010000	/* LPI Enable */
+#define LPI_CTRL_STATUS_RLPIST	0x00000200	/* Receive LPI state */
+#define LPI_CTRL_STATUS_TLPIST	0x00000100	/* Transmit LPI state */
+#define LPI_CTRL_STATUS_RLPIEX	0x00000008	/* Receive LPI Exit */
+#define LPI_CTRL_STATUS_RLPIEN	0x00000004	/* Receive LPI Entry */
+#define LPI_CTRL_STATUS_TLPIEX	0x00000002	/* Transmit LPI Exit */
+#define LPI_CTRL_STATUS_TLPIEN	0x00000001	/* Transmit LPI Entry */
+
 /* GMAC HW ADDR regs */
 #define GMAC_ADDR_HIGH(reg)		(0x00000040+(reg * 8))
 #define GMAC_ADDR_LOW(reg)		(0x00000044+(reg * 8))
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index b1c48b9..a4fab30 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -187,26 +187,107 @@ static void dwmac1000_pmt(void __iomem *ioaddr, unsigned long mode)
 }
 
 
-static void dwmac1000_irq_status(void __iomem *ioaddr)
+static int dwmac1000_irq_status(void __iomem *ioaddr)
 {
 	u32 intr_status = readl(ioaddr + GMAC_INT_STATUS);
+	int status = 0;
 
 	/* Not used events (e.g. MMC interrupts) are not handled. */
-	if ((intr_status & mmc_tx_irq))
-		CHIP_DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n",
+	if ((intr_status & mmc_tx_irq)) {
+		CHIP_DBG(KERN_INFO "GMAC: MMC tx interrupt: 0x%08x\n",
 		    readl(ioaddr + GMAC_MMC_TX_INTR));
-	if (unlikely(intr_status & mmc_rx_irq))
-		CHIP_DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n",
+		status |= core_mmc_tx_irq;
+	}
+	if (unlikely(intr_status & mmc_rx_irq)) {
+		CHIP_DBG(KERN_INFO "GMAC: MMC rx interrupt: 0x%08x\n",
 		    readl(ioaddr + GMAC_MMC_RX_INTR));
-	if (unlikely(intr_status & mmc_rx_csum_offload_irq))
-		CHIP_DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n",
+		status |= core_mmc_rx_irq;
+	}
+	if (unlikely(intr_status & mmc_rx_csum_offload_irq)) {
+		CHIP_DBG(KERN_INFO "GMAC: MMC rx csum offload: 0x%08x\n",
 		    readl(ioaddr + GMAC_MMC_RX_CSUM_OFFLOAD));
+		status |= core_mmc_rx_csum_offload_irq;
+	}
 	if (unlikely(intr_status & pmt_irq)) {
-		CHIP_DBG(KERN_DEBUG "GMAC: received Magic frame\n");
+		CHIP_DBG(KERN_INFO "GMAC: received Magic frame\n");
 		/* clear the PMT bits 5 and 6 by reading the PMT
 		 * status register. */
 		readl(ioaddr + GMAC_PMT);
+		status |= core_irq_receive_pmt_irq;
 	}
+	/* MAC trx/rx EEE LPI entry/exit interrupts */
+	if (intr_status & lpiis_irq) {
+		/* Clean LPI interrupt by reading the Reg 12 */
+		u32 lpi_status = readl(ioaddr + LPI_CTRL_STATUS);
+
+		if (lpi_status & LPI_CTRL_STATUS_TLPIEN) {
+			CHIP_DBG(KERN_INFO "GMAC TX entered in LPI\n");
+			status |= core_irq_tx_path_in_lpi_mode;
+		}
+		if (lpi_status & LPI_CTRL_STATUS_TLPIEX) {
+			CHIP_DBG(KERN_INFO "GMAC TX exit from LPI\n");
+			status |= core_irq_tx_path_exit_lpi_mode;
+		}
+		if (lpi_status & LPI_CTRL_STATUS_RLPIEN) {
+			CHIP_DBG(KERN_INFO "GMAC RX entered in LPI\n");
+			status |= core_irq_rx_path_in_lpi_mode;
+		}
+		if (lpi_status & LPI_CTRL_STATUS_RLPIEX) {
+			CHIP_DBG(KERN_INFO "GMAC RX exit from LPI\n");
+			status |= core_irq_rx_path_exit_lpi_mode;
+		}
+	}
+
+	return status;
+}
+
+static void  dwmac1000_set_eee_mode(void __iomem *ioaddr)
+{
+	u32 value;
+
+	/* Enable the link status receive on RGMII, SGMII ore SMII
+	 * receive path and instruct the transmit to enter in LPI
+	 * state. */
+	value = readl(ioaddr + LPI_CTRL_STATUS);
+	value |= LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_LPITXA;
+	writel(value, ioaddr + LPI_CTRL_STATUS);
+}
+
+static void  dwmac1000_reset_eee_mode(void __iomem *ioaddr)
+{
+	u32 value;
+
+	value = readl(ioaddr + LPI_CTRL_STATUS);
+	value &= ~(LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_LPITXA);
+	writel(value, ioaddr + LPI_CTRL_STATUS);
+}
+
+static void  dwmac1000_set_eee_pls(void __iomem *ioaddr, int link)
+{
+	u32 value;
+
+	value = readl(ioaddr + LPI_CTRL_STATUS);
+
+	if (link)
+		value |= LPI_CTRL_STATUS_PLS;
+	else
+		value &= ~LPI_CTRL_STATUS_PLS;
+
+	writel(value, ioaddr + LPI_CTRL_STATUS);
+}
+
+static void  dwmac1000_set_eee_timer(void __iomem *ioaddr, int ls, int tw)
+{
+	int value = ((tw & 0xffff)) | ((ls & 0x7ff) << 16);
+
+	/* Program the timers in the LPI timer control register:
+	 * LS: minimum time (ms) for which the link
+	 *  status from PHY should be ok before transmitting
+	 *  the LPI pattern.
+	 * TW: minimum time (us) for which the core waits
+	 *  after it has stopped transmitting the LPI pattern.
+	 */
+	writel(value, ioaddr + LPI_TIMER_CTRL);
 }
 
 static const struct stmmac_ops dwmac1000_ops = {
@@ -219,6 +300,10 @@ static const struct stmmac_ops dwmac1000_ops = {
 	.pmt = dwmac1000_pmt,
 	.set_umac_addr = dwmac1000_set_umac_addr,
 	.get_umac_addr = dwmac1000_get_umac_addr,
+	.set_eee_mode =  dwmac1000_set_eee_mode,
+	.reset_eee_mode =  dwmac1000_reset_eee_mode,
+	.set_eee_timer =  dwmac1000_set_eee_timer,
+	.set_eee_pls =  dwmac1000_set_eee_pls,
 };
 
 struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
index 138fb8d..a11370b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
@@ -72,9 +72,9 @@ static void dwmac100_dump_mac_regs(void __iomem *ioaddr)
 		readl(ioaddr + MAC_VLAN2));
 }
 
-static void dwmac100_irq_status(void __iomem *ioaddr)
+static int dwmac100_irq_status(void __iomem *ioaddr)
 {
-	return;
+	return 0;
 }
 
 static void dwmac100_set_umac_addr(void __iomem *ioaddr, unsigned char *addr,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
index 437edac..27cbcd7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
@@ -69,6 +69,7 @@
 #define DMA_INTR_DEFAULT_MASK	(DMA_INTR_NORMAL | DMA_INTR_ABNORMAL)
 
 /* DMA Status register defines */
+#define DMA_STATUS_GLPII	0x40000000	/* GMAC LPI interrupt */
 #define DMA_STATUS_GPI		0x10000000	/* PMT interrupt */
 #define DMA_STATUS_GMI		0x08000000	/* MMC interrupt */
 #define DMA_STATUS_GLI		0x04000000	/* GMAC Line interface int */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index b4b095f..266fcac 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -81,6 +81,10 @@ struct stmmac_priv {
 	struct stmmac_counters mmc;
 	struct dma_features dma_cap;
 	int hw_cap_support;
+	struct timer_list eee_ctrl_timer;
+	bool tx_path_in_lpi_mode;
+	bool eee_enabled;
+	int lpi_irq;
 };
 
 extern int phyaddr;
@@ -99,3 +103,6 @@ int stmmac_dvr_remove(struct net_device *ndev);
 struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 				     struct plat_stmmacenet_data *plat_dat,
 				     void __iomem *addr);
+void stmmac_disable_eee_mode(struct stmmac_priv *priv);
+bool stmmac_eee_init(struct stmmac_priv *priv);
+
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index f98e151..90cce62 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -93,6 +93,16 @@ static const struct stmmac_stats stmmac_gstrings_stats[] = {
 	STMMAC_STAT(poll_n),
 	STMMAC_STAT(sched_timer_n),
 	STMMAC_STAT(normal_irq_n),
+	STMMAC_STAT(normal_irq_n),
+	STMMAC_STAT(mmc_tx_irq_n),
+	STMMAC_STAT(mmc_rx_irq_n),
+	STMMAC_STAT(mmc_rx_csum_offload_irq_n),
+	STMMAC_STAT(irq_receive_pmt_irq_n),
+	STMMAC_STAT(irq_tx_path_in_lpi_mode_n),
+	STMMAC_STAT(irq_tx_path_exit_lpi_mode_n),
+	STMMAC_STAT(irq_rx_path_in_lpi_mode_n),
+	STMMAC_STAT(irq_rx_path_exit_lpi_mode_n),
+	STMMAC_STAT(phy_eee_wakeup_error_n),
 };
 #define STMMAC_STATS_LEN ARRAY_SIZE(stmmac_gstrings_stats)
 
@@ -366,6 +376,11 @@ static void stmmac_get_ethtool_stats(struct net_device *dev,
 					     (*(u32 *)p);
 			}
 		}
+		if (priv->eee_enabled) {
+			int val = phy_get_eee_err(priv->phydev);
+			if (val)
+				priv->xstats.phy_eee_wakeup_error_n = val;
+		}
 	}
 	for (i = 0; i < STMMAC_STATS_LEN; i++) {
 		char *p = (char *)priv + stmmac_gstrings_stats[i].stat_offset;
@@ -464,6 +479,35 @@ static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	return 0;
 }
 
+static int ethtool_op_get_eee(struct net_device *dev, struct ethtool_value *eee)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	if (!priv->dma_cap.eee)
+		return -EOPNOTSUPP;
+
+	eee->data = priv->eee_enabled;
+
+	return 0;
+}
+
+static int ethtool_op_set_eee(struct net_device *dev, struct ethtool_value *eee)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	if ((!eee->data) && (priv->eee_enabled)) {
+		stmmac_disable_eee_mode(priv);
+		priv->eee_enabled = eee->data;
+	} else if ((eee->data) && (!priv->eee_enabled))
+		/* We are asking for enabling the EEE but this
+		 * has to be verified by invoking the eee_init function.
+		 * For this reason we cannot set eee_enabled to
+		 * eee->data, directly. */
+		priv->eee_enabled = stmmac_eee_init(priv);
+
+	return 0;
+}
+
 static const struct ethtool_ops stmmac_ethtool_ops = {
 	.begin = stmmac_check_if_running,
 	.get_drvinfo = stmmac_ethtool_getdrvinfo,
@@ -481,6 +525,8 @@ static const struct ethtool_ops stmmac_ethtool_ops = {
 	.get_wol = stmmac_get_wol,
 	.set_wol = stmmac_set_wol,
 	.get_sset_count	= stmmac_get_sset_count,
+	.get_eee = ethtool_op_get_eee,
+	.set_eee = ethtool_op_set_eee,
 };
 
 void stmmac_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index e85ffbd..2f69c55 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -133,6 +133,11 @@ static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
 				      NETIF_MSG_LINK | NETIF_MSG_IFUP |
 				      NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
 
+static int eee_timer = 1000;
+module_param(eee_timer, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(eee_timer, "LPI tx expiration time in msec");
+#define STMMAC_LPI_TIMER(x) (jiffies + msecs_to_jiffies(x))
+
 static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
 
 #ifdef CONFIG_STMMAC_DEBUG_FS
@@ -197,6 +202,82 @@ static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
 					  phydev->speed);
 }
 
+static void stmmac_enable_eee_mode(struct stmmac_priv *priv)
+{
+	/* Check and enter in LPI mode */
+	if ((priv->dirty_tx == priv->cur_tx) &&
+	    (priv->tx_path_in_lpi_mode == false))
+		priv->hw->mac->set_eee_mode(priv->ioaddr);
+}
+
+void stmmac_disable_eee_mode(struct stmmac_priv *priv)
+{
+	/* Exit and disable EEE in case of we are are in LPI state. */
+	priv->hw->mac->reset_eee_mode(priv->ioaddr);
+	del_timer_sync(&priv->eee_ctrl_timer);
+	priv->tx_path_in_lpi_mode = false;
+}
+
+/**
+ * stmmac_eee_ctrl_timer
+ * @arg : data hook
+ * Description:
+ *  If there is no data transfer and if we are not in LPI state,
+ *  then MAC Transmitter can be moved to LPI state.
+ */
+static void stmmac_eee_ctrl_timer(unsigned long arg)
+{
+	struct stmmac_priv *priv = (struct stmmac_priv *)arg;
+
+	stmmac_enable_eee_mode(priv);
+	mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_TIMER(eee_timer));
+}
+
+/**
+ * stmmac_eee_init
+ * @priv: private device pointer
+ * Description:
+ *  If the EEE support has been enabled while configuring the driver,
+ *  if the GMAC actually supports the EEE (from the HW cap reg) and the
+ *  phy can also manage EEE, so enable the LPI state and start the timer
+ *  to verify if the tx path can enter in LPI state.
+ */
+bool stmmac_eee_init(struct stmmac_priv *priv)
+{
+	bool ret = false;
+
+	/* MAC core supports the EEE feature. */
+	if (priv->dma_cap.eee) {
+
+		/* Check if the PHY supports EEE*/
+		if (phy_check_eee(priv->phydev))
+			goto out;
+
+		init_timer(&priv->eee_ctrl_timer);
+		priv->eee_ctrl_timer.function = stmmac_eee_ctrl_timer;
+		priv->eee_ctrl_timer.data = (unsigned long)priv;
+		priv->eee_ctrl_timer.expires = STMMAC_LPI_TIMER(eee_timer);
+		add_timer(&priv->eee_ctrl_timer);
+
+		priv->hw->mac->set_eee_timer(priv->ioaddr, 0x3e8, 0);
+
+		pr_info("stmmac: Energy-Efficient Ethernet initialized\n");
+
+		ret = true;
+	}
+out:
+	return ret;
+}
+
+static void stmmac_eee_adjust(struct stmmac_priv *priv)
+{
+	/* When the EEE has been already initialised we have to
+	 * modify the PLS bit in the LPI ctrl & status reg according
+	 * to the PHY link status. For this reason. */
+	if (priv->eee_enabled)
+		priv->hw->mac->set_eee_pls(priv->ioaddr, priv->phydev->link);
+}
+
 /**
  * stmmac_adjust_link
  * @dev: net device structure
@@ -217,6 +298,7 @@ static void stmmac_adjust_link(struct net_device *dev)
 	    phydev->addr, phydev->link);
 
 	spin_lock_irqsave(&priv->lock, flags);
+
 	if (phydev->link) {
 		u32 ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
 
@@ -283,6 +365,8 @@ static void stmmac_adjust_link(struct net_device *dev)
 	if (new_state && netif_msg_link(priv))
 		phy_print_status(phydev);
 
+	stmmac_eee_adjust(priv);
+
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n");
@@ -300,7 +384,7 @@ static int stmmac_init_phy(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 	struct phy_device *phydev;
-	char phy_id[MII_BUS_ID_SIZE + 3];
+	char phy_id_fmt[MII_BUS_ID_SIZE + 3];
 	char bus_id[MII_BUS_ID_SIZE];
 	int interface = priv->plat->interface;
 	priv->oldlink = 0;
@@ -308,11 +392,13 @@ static int stmmac_init_phy(struct net_device *dev)
 	priv->oldduplex = -1;
 
 	snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x", priv->plat->bus_id);
-	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
+	snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
 		 priv->plat->phy_addr);
-	pr_debug("stmmac_init_phy:  trying to attach to %s\n", phy_id);
+	/* (mii bus id:phy device id)  */
+	pr_debug("stmmac_init_phy:  trying to attach to %s\n", phy_id_fmt);
 
-	phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0, interface);
+	phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, 0,
+			     interface);
 
 	if (IS_ERR(phydev)) {
 		pr_err("%s: Could not attach to PHY\n", dev->name);
@@ -651,6 +737,11 @@ static void stmmac_tx(struct stmmac_priv *priv)
 		}
 		netif_tx_unlock(priv->dev);
 	}
+
+	if ((priv->eee_enabled) && (!priv->tx_path_in_lpi_mode)) {
+		stmmac_enable_eee_mode(priv);
+		mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_TIMER(eee_timer));
+	}
 	spin_unlock(&priv->tx_lock);
 }
 
@@ -975,6 +1066,17 @@ static int stmmac_open(struct net_device *dev)
 		}
 	}
 
+	/* Request the IRQ lines */
+	if (priv->lpi_irq != -ENXIO) {
+		ret = request_irq(priv->lpi_irq, stmmac_interrupt, IRQF_SHARED,
+				  dev->name, dev);
+		if (unlikely(ret < 0)) {
+			pr_err("%s: ERROR: allocating the LPI IRQ %d"
+			       " (error: %d)\n", __func__, priv->lpi_irq, ret);
+			goto open_error_lpiirq;
+		}
+	}
+
 	/* Enable the MAC Rx/Tx */
 	stmmac_set_mac(priv->ioaddr, true);
 
@@ -1010,12 +1112,18 @@ static int stmmac_open(struct net_device *dev)
 	if (priv->phydev)
 		phy_start(priv->phydev);
 
+	priv->eee_enabled = stmmac_eee_init(priv);
+
 	napi_enable(&priv->napi);
 	skb_queue_head_init(&priv->rx_recycle);
 	netif_start_queue(dev);
 
 	return 0;
 
+open_error_lpiirq:
+	if (priv->wol_irq != dev->irq)
+		free_irq(priv->wol_irq, dev);
+
 open_error_wolirq:
 	free_irq(dev->irq, dev);
 
@@ -1039,6 +1147,9 @@ static int stmmac_release(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 
+	if (priv->eee_enabled)
+		del_timer_sync(&priv->eee_ctrl_timer);
+
 	/* Stop and disconnect the PHY */
 	if (priv->phydev) {
 		phy_stop(priv->phydev);
@@ -1061,6 +1172,8 @@ static int stmmac_release(struct net_device *dev)
 	free_irq(dev->irq, dev);
 	if (priv->wol_irq != dev->irq)
 		free_irq(priv->wol_irq, dev);
+	if (priv->lpi_irq != -ENXIO)
+		free_irq(priv->lpi_irq, dev);
 
 	/* Stop TX/RX DMA and clear the descriptors */
 	priv->hw->dma->stop_tx(priv->ioaddr);
@@ -1110,6 +1223,9 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	spin_lock(&priv->tx_lock);
 
+	if (priv->tx_path_in_lpi_mode)
+		stmmac_disable_eee_mode(priv);
+
 	entry = priv->cur_tx % txsize;
 
 #ifdef STMMAC_XMIT_DEBUG
@@ -1484,10 +1600,37 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
 		return IRQ_NONE;
 	}
 
-	if (priv->plat->has_gmac)
-		/* To handle GMAC own interrupts */
-		priv->hw->mac->host_irq_status((void __iomem *) dev->base_addr);
+	/* To handle GMAC own interrupts */
+	if (priv->plat->has_gmac) {
+		int status = priv->hw->mac->host_irq_status((void __iomem *)
+							    dev->base_addr);
+		if (unlikely(status)) {
+			if (status & core_mmc_tx_irq)
+				priv->xstats.mmc_tx_irq_n++;
+			if (status & core_mmc_rx_irq)
+				priv->xstats.mmc_rx_irq_n++;
+			if (status & core_mmc_rx_csum_offload_irq)
+				priv->xstats.mmc_rx_csum_offload_irq_n++;
+			if (status & core_irq_receive_pmt_irq)
+				priv->xstats.irq_receive_pmt_irq_n++;
+
+			/* For LPI we need to save the tx status */
+			if (status & core_irq_tx_path_in_lpi_mode) {
+				priv->xstats.irq_tx_path_in_lpi_mode_n++;
+				priv->tx_path_in_lpi_mode = true;
+			}
+			if (status & core_irq_tx_path_exit_lpi_mode) {
+				priv->xstats.irq_tx_path_exit_lpi_mode_n++;
+				priv->tx_path_in_lpi_mode = false;
+			}
+			if (status & core_irq_rx_path_in_lpi_mode)
+				priv->xstats.irq_rx_path_in_lpi_mode_n++;
+			if (status & core_irq_rx_path_exit_lpi_mode)
+				priv->xstats.irq_rx_path_exit_lpi_mode_n++;
+		}
+	}
 
+	/* To handle DMA interrupts */
 	stmmac_dma_interrupt(priv);
 
 	return IRQ_HANDLED;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 3aad981..bc0e83f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -94,6 +94,8 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
 	if (priv->wol_irq == -ENXIO)
 		priv->wol_irq = priv->dev->irq;
 
+	priv->lpi_irq = platform_get_irq_byname(pdev, "eth_lpi");
+
 	platform_set_drvdata(pdev, priv->dev);
 
 	pr_debug("STMMAC platform driver registration completed");
-- 
1.7.4.4

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists