>From 1f10d82e8d2df8d5b86595954dcb4e3c2cab9011 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 1 Mar 2012 09:40:12 +0000 Subject: [PATCH 3.3.0-rc4] stmmac: Allow stmmac to work with other PHY buses(v3). As stmmac mdio bus name prefix is hardcoded in the driver, this allows only phys on stmmac mdio buses to connect, however stmmac should allow phys on other mdio buses too. This patch adds new variable phy_bus_name to plat_stmmacenet_data struct to let the BSP decide which phy bus to be used by stmmac driver. A typical use-case is to have generic MDIO buses like mdio-gpio on top of stmmac. Signed-off-by: Srinivas Kandagatla --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 +++++++- include/linux/stmmac.h | 1 + 2 files changed, 8 insertions(+), 1 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 6ee593a..da891ef 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -307,7 +307,13 @@ static int stmmac_init_phy(struct net_device *dev) priv->speed = 0; priv->oldduplex = -1; - snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x", priv->plat->bus_id); + if (priv->plat->phy_bus_name) + snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x", + priv->plat->phy_bus_name, priv->plat->bus_id); + else + snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x", + priv->plat->bus_id); + snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id, priv->plat->phy_addr); pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id); diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 0dddc9e..172b5e1 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -39,6 +39,7 @@ struct stmmac_mdio_bus_data { }; struct plat_stmmacenet_data { + char *phy_bus_name; int bus_id; int phy_addr; int interface; -- 1.6.3.3