[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1331292906-7467-2-git-send-email-bjorn@mork.no>
Date: Fri, 9 Mar 2012 12:35:05 +0100
From: Bjørn Mork <bjorn@...k.no>
To: Greg KH <gregkh@...uxfoundation.org>
Cc: linux-usb@...r.kernel.org, Dan Williams <dcbw@...hat.com>,
Oliver Neukum <oliver@...kum.org>, netdev@...r.kernel.org,
Bjørn Mork <bjorn@...k.no>
Subject: [PATCH RESEND v3 1/2] net: qmi_wwan: support devices having a shared QMI/wwan interface
Use the new cdc-wdm subdriver interface to create a device management
device even for USB devices having a single combined QMI/wwan USB
interface with three endpoints (int, bulk in, bulk out) instead of
separate data and control interfaces.
Some Huawei devices can be switched to a single interface mode for
use with other operating systems than Linux. This adds support
for these devices when they run in such non-Linux modes.
Signed-off-by: Bjørn Mork <bjorn@...k.no>
---
Previously sent as patch number 4/5.
Requires:
9b28ecd net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices
drivers/net/usb/qmi_wwan.c | 168 +++++++++++++++++++++++++++++++++++++++----
1 files changed, 152 insertions(+), 16 deletions(-)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 739e6de..a61c7a1 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -13,6 +13,7 @@
#include <linux/usb.h>
#include <linux/usb/cdc.h>
#include <linux/usb/usbnet.h>
+#include <linux/usb/cdc-wdm.h>
/* The name of the CDC Device Management driver */
#define DM_DRIVER "cdc_wdm"
@@ -64,6 +65,9 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
struct usb_cdc_ether_desc *cdc_ether = NULL;
u32 required = 1 << USB_CDC_HEADER_TYPE | 1 << USB_CDC_UNION_TYPE;
u32 found = 0;
+ atomic_t *pmcount = (void *)&dev->data[1];
+
+ atomic_set(pmcount, 0);
/*
* assume a data interface has no additional descriptors and
@@ -170,13 +174,127 @@ err:
return status;
}
-/* stolen from cdc_ether.c */
+/* using a counter to merge subdriver requests with our own into a combined state */
static int qmi_wwan_manage_power(struct usbnet *dev, int on)
{
- dev->intf->needs_remote_wakeup = on;
- return 0;
+ atomic_t *pmcount = (void *)&dev->data[1];
+ int rv = 0;
+
+ dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(pmcount), on);
+
+ if ((on && atomic_add_return(1, pmcount) == 1) || (!on && atomic_dec_and_test(pmcount))) {
+ /* need autopm_get/put here to ensure the usbcore sees the new value */
+ rv = usb_autopm_get_interface(dev->intf);
+ if (rv < 0)
+ goto err;
+ dev->intf->needs_remote_wakeup = on;
+ usb_autopm_put_interface(dev->intf);
+ }
+err:
+ return rv;
+}
+
+static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
+{
+ struct usbnet *dev = usb_get_intfdata(intf);
+ return qmi_wwan_manage_power(dev, on);
}
+/* Some devices combine the "control" and "data" functions into a
+ * single interface with all three endpoints: interrupt + bulk in and
+ * out
+ *
+ * Setting up cdc-wdm as a subdriver owning the interrupt endpoint
+ * will let it provide userspace access to the encapsulated QMI
+ * protocol without interfering with the usbnet operations.
+ */
+static int qmi_wwan_bind_shared(struct usbnet *dev, struct usb_interface *intf)
+{
+ int rv;
+ struct usb_driver *subdriver = NULL;
+ atomic_t *pmcount = (void *)&dev->data[1];
+
+ atomic_set(pmcount, 0);
+
+ /* collect all three endpoints */
+ rv = usbnet_get_endpoints(dev, intf);
+ if (rv < 0)
+ goto err;
+
+ /* require interrupt endpoint for subdriver */
+ if (!dev->status) {
+ rv = -EINVAL;
+ goto err;
+ }
+
+ subdriver = usb_cdc_wdm_register(intf, &dev->status->desc, 512, &qmi_wwan_cdc_wdm_manage_power);
+ if (IS_ERR(subdriver)) {
+ rv = PTR_ERR(subdriver);
+ goto err;
+ }
+
+ /* can't let usbnet use the interrupt endpoint */
+ dev->status = NULL;
+
+ /* save subdriver struct for suspend/resume wrappers */
+ dev->data[0] = (unsigned long)subdriver;
+
+err:
+ return rv;
+}
+
+static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct usb_driver *subdriver = (void *)dev->data[0];
+
+ if (subdriver && subdriver->disconnect)
+ subdriver->disconnect(intf);
+
+ dev->data[0] = (unsigned long)NULL;
+}
+
+/* suspend/resume wrappers calling both usbnet and the cdc-wdm
+ * subdriver if present.
+ *
+ * NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide
+ * wrappers for those without adding usbnet reset support first.
+ */
+static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct usbnet *dev = usb_get_intfdata(intf);
+ struct usb_driver *subdriver = (void *)dev->data[0];
+ int ret;
+
+ ret = usbnet_suspend(intf, message);
+ if (ret < 0)
+ goto err;
+
+ if (subdriver && subdriver->suspend)
+ ret = subdriver->suspend(intf, message);
+ if (ret < 0)
+ usbnet_resume(intf);
+err:
+ return ret;
+}
+
+static int qmi_wwan_resume(struct usb_interface *intf)
+{
+ struct usbnet *dev = usb_get_intfdata(intf);
+ struct usb_driver *subdriver = (void *)dev->data[0];
+ int ret = 0;
+
+ if (subdriver && subdriver->resume)
+ ret = subdriver->resume(intf);
+ if (ret < 0)
+ goto err;
+ ret = usbnet_resume(intf);
+ if (ret < 0 && subdriver && subdriver->resume && subdriver->suspend)
+ subdriver->suspend(intf, PMSG_SUSPEND);
+err:
+ return ret;
+}
+
+
static const struct driver_info qmi_wwan_info = {
.description = "QMI speaking wwan device",
.flags = FLAG_WWAN,
@@ -184,19 +302,37 @@ static const struct driver_info qmi_wwan_info = {
.manage_power = qmi_wwan_manage_power,
};
+static const struct driver_info qmi_wwan_shared = {
+ .description = "QMI speaking wwan device with combined interface",
+ .flags = FLAG_WWAN,
+ .bind = qmi_wwan_bind_shared,
+ .unbind = qmi_wwan_unbind_shared,
+ .manage_power = qmi_wwan_manage_power,
+};
+
#define HUAWEI_VENDOR_ID 0x12D1
static const struct usb_device_id products[] = {
-{
- /* Huawei E392, E398 and possibly others sharing both device id and more... */
- .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
- .idVendor = HUAWEI_VENDOR_ID,
- .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
- .bInterfaceSubClass = 1,
- .bInterfaceProtocol = 8, /* NOTE: This is the *slave* interface of the CDC Union! */
- .driver_info = (unsigned long)&qmi_wwan_info,
-}, {
-}, /* END */
+ { /* Huawei E392, E398 and possibly others sharing both device id and more... */
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = HUAWEI_VENDOR_ID,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 8, /* NOTE: This is the *slave* interface of the CDC Union! */
+ .driver_info = (unsigned long)&qmi_wwan_info,
+ },
+ { /* Huawei E392, E398 and possibly others in "Windows mode"
+ * using a combined control and data interface without any CDC
+ * functional descriptors
+ */
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = HUAWEI_VENDOR_ID,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 17,
+ .driver_info = (unsigned long)&qmi_wwan_shared,
+ },
+ { } /* END */
};
MODULE_DEVICE_TABLE(usb, products);
@@ -205,9 +341,9 @@ static struct usb_driver qmi_wwan_driver = {
.id_table = products,
.probe = usbnet_probe,
.disconnect = usbnet_disconnect,
- .suspend = usbnet_suspend,
- .resume = usbnet_resume,
- .reset_resume = usbnet_resume,
+ .suspend = qmi_wwan_suspend,
+ .resume = qmi_wwan_resume,
+ .reset_resume = qmi_wwan_resume,
.supports_autosuspend = 1,
};
--
1.7.9.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists