| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20120312143825.GB13869@game.jcrosoft.org>
Date: Mon, 12 Mar 2012 15:38:25 +0100
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
To: Stefan Roese <sr@...x.de>
Cc: netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
devicetree-discuss@...abs.org,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Viresh Kumar <viresh.kumar@...com>
Subject: Re: [PATCH] stmmac: Add device-tree support
On 15:05 Mon 12 Mar , Stefan Roese wrote:
> This patch adds support to configure the STMMAC ethernet driver via
> device-tree instead of platform_data.
>
> Currently, only the properties needed on SPEAr600 are provided. All
> other properties should be added once needed on other platforms.
>
> Signed-off-by: Stefan Roese <sr@...x.de>
> Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>
> Cc: Viresh Kumar <viresh.kumar@...com>
> ---
> Documentation/devicetree/bindings/net/stmmac.txt | 38 +++++++++++
> .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 66 +++++++++++++++++++-
> 2 files changed, 103 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/net/stmmac.txt
>
> diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
> new file mode 100644
> index 0000000..386a47f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/stmmac.txt
> @@ -0,0 +1,38 @@
> +* STMicroelectronics 10/100/1000 Ethernet driver (GMAC)
> +
> +Required properties:
> +- compatible: Should be "stm,gmac"
this IP have 2 version at least the GMAC for the second generation and mac for
the first generation
> +- reg: Address and length of the register set for the device
> +- interrupt-parent: Should be the phandle for the interrupt controller
> + that services interrupts for this device
> +- interrupts: Should contain the STMMAC interrupts
> +- interrupt-names: Should contain the interrupt names "macirq"
> + "eth_wake_irq" if this interrupt is supported in the "interrupts"
> + property
optionnal
> +- phy-mode: String, operation mode of the PHY interface.
> + Supported values are: "mii", "rmii", "gmii", "rgmii".
> +- phy-addr: MDIO address of the PHY
> +
> +Optional properties:
> +- stm,prog-burst-len: Specify the burst length
> +- stm,has-gmac: Indicates that the controller supports 1000Mbps
this IP support more mode 10/100/300/1000
> +- stm,has-pmt: Indicates that the controller supports power management
> +- mac-address: 6 bytes, mac address
> +
> +Examples:
> +
> + gmac0: stmmac@...00000 {
> + compatible = "stm,gmac";
> + reg = <0xe0800000 0x8000>;
> + interrupt-parent = <&vic1>;
> + interrupts = <24 23>;
> + interrupt-names = "macirq", "eth_wake_irq";
> + mac-address = [000000000000]; /* Filled in by U-Boot */
> +
> + stm,prog-burst-len = <8>;
> + stm,has-gmac;
> + stm,has-pmt;
> +
> + phy-mode = "gmii";
> + phy-addr = <0>;
> + };
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index 3aad981..fcf46c7 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -24,8 +24,43 @@
>
> #include <linux/platform_device.h>
> #include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_net.h>
> #include "stmmac.h"
>
> +#ifdef CONFIG_OF
> +static int __devinit stmmac_probe_config_dt(struct platform_device *pdev,
> + struct plat_stmmacenet_data *plat,
> + const char **mac)
> +{
> + struct device_node *np = pdev->dev.of_node;
> +
> + if (!np)
> + return -ENODEV;
> +
> + *mac = of_get_mac_address(np);
> +
> + plat->interface = of_get_phy_mode(np);
> + of_property_read_u32(np, "phy-addr", &plat->phy_addr);
> + plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
> + sizeof(struct stmmac_mdio_bus_data),
> + GFP_KERNEL);
> +
> + /*
> + * Currently only the properties needed on SPEAr600
> + * are provided. All other properties should be added
> + * once needed on other platforms.
> + */
> + of_property_read_u32(np, "stm,prog-burst-len", &plat->pbl);
> + if (of_get_property(np, "stm,has-gmac", NULL))
> + plat->has_gmac = 1;
> + if (of_get_property(np, "stm,has-pmt", NULL))
> + plat->pmt = 1;
> +
> + return 0;
> +}
> +#endif /* CONFIG_OF */
> +
> /**
> * stmmac_pltfr_probe
> * @pdev: platform device pointer
> @@ -39,7 +74,8 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
> struct resource *res;
> void __iomem *addr = NULL;
> struct stmmac_priv *priv = NULL;
> - struct plat_stmmacenet_data *plat_dat;
> + struct plat_stmmacenet_data *plat_dat = NULL;
> + const char *mac = NULL;
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (!res)
> @@ -58,6 +94,22 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
> ret = -ENOMEM;
> goto out_release_region;
> }
> +
> +#ifdef CONFIG_OF
> + plat_dat = devm_kzalloc(&pdev->dev, sizeof(struct plat_stmmacenet_data),
> + GFP_KERNEL);
> + if (!plat_dat) {
> + pr_err("%s: ERROR: no memory", __func__);
> + ret = -ENOMEM;
> + goto out_unmap;
> + }
> +
> + ret = stmmac_probe_config_dt(pdev, plat_dat, &mac);
> + if (ret) {
> + pr_err("%s: main dt probe failed", __func__);
> + goto out_unmap;
> + }
> +#else
This must be check at runtime, we can boot a kernel with or without DT.
Best Reards,
J.
> plat_dat = pdev->dev.platform_data;
>
> /* Custom initialisation (if needed)*/
> @@ -66,6 +118,7 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
> if (unlikely(ret))
> goto out_unmap;
> }
> +#endif
>
> priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr);
> if (!priv) {
> @@ -73,6 +126,10 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
> goto out_unmap;
> }
>
> + /* Get MAC address if available (DT) */
> + if (mac)
> + memcpy(priv->dev->dev_addr, mac, ETH_ALEN);
> +
> /* Get the MAC information */
> priv->dev->irq = platform_get_irq_byname(pdev, "macirq");
> if (priv->dev->irq == -ENXIO) {
> @@ -178,6 +235,12 @@ static const struct dev_pm_ops stmmac_pltfr_pm_ops = {
> static const struct dev_pm_ops stmmac_pltfr_pm_ops;
> #endif /* CONFIG_PM */
>
> +static const struct of_device_id stmmac_dt_ids[] = {
> + { .compatible = "stm,gmac", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
> +
> static struct platform_driver stmmac_driver = {
> .probe = stmmac_pltfr_probe,
> .remove = stmmac_pltfr_remove,
> @@ -185,6 +248,7 @@ static struct platform_driver stmmac_driver = {
> .name = STMMAC_RESOURCE_NAME,
> .owner = THIS_MODULE,
> .pm = &stmmac_pltfr_pm_ops,
> + .of_match_table = of_match_ptr(stmmac_dt_ids),
> },
> };
>
> --
> 1.7.9.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists