| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1331623394-14600-1-git-send-email-sr@denx.de>
Date: Tue, 13 Mar 2012 08:23:14 +0100
From: Stefan Roese <sr@...x.de>
To: netdev@...r.kernel.org
Cc: devicetree-discuss@...abs.org, spear-devel@...t.st.com,
Giuseppe Cavallaro <peppe.cavallaro@...com>
Subject: [PATCH v2] stmmac: Add device-tree support
This patch adds support to configure the STMMAC ethernet driver via
device-tree instead of platform_data.
Currently, only the properties needed on SPEAr600 are provided. All
other properties should be added once needed on other platforms.
Signed-off-by: Stefan Roese <sr@...x.de>
Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>
---
v2:
- Renamed stm -> st
- Renamed compatible to "st,spear600-gmac"
- Removed "prog-burst-len", "had-gmac", has-pmt" properties.
They are now implicitly set for "st,spear600-gmac" compatible
devices.
- Removed phy-addr
- Used "if (pdev->dev.of_node)" to distinguish between DT
and non-DT version instead of #ifdef
Documentation/devicetree/bindings/net/stmmac.txt | 28 ++++++++
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 76 +++++++++++++++++++-
2 files changed, 102 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/stmmac.txt
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
new file mode 100644
index 0000000..a91f4e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -0,0 +1,28 @@
+* STMicroelectronics 10/100/1000 Ethernet driver (GMAC)
+
+Required properties:
+- compatible: Should be "st,spear600-gmac"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the STMMAC interrupts
+- interrupt-names: Should contain the interrupt names "macirq"
+ "eth_wake_irq" if this interrupt is supported in the "interrupts"
+ property
+- phy-mode: String, operation mode of the PHY interface.
+ Supported values are: "mii", "rmii", "gmii", "rgmii".
+
+Optional properties:
+- mac-address: 6 bytes, mac address
+
+Examples:
+
+ gmac0: stmmac@...00000 {
+ compatible = "st,spear600-gmac";
+ reg = <0xe0800000 0x8000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <24 23>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ mac-address = [000000000000]; /* Filled in by U-Boot */
+ phy-mode = "gmii";
+ };
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 3aad981..ed8b477 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -24,8 +24,50 @@
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
#include "stmmac.h"
+#ifdef CONFIG_OF
+static int __devinit stmmac_probe_config_dt(struct platform_device *pdev,
+ struct plat_stmmacenet_data *plat,
+ const char **mac)
+{
+ struct device_node *np = pdev->dev.of_node;
+
+ if (!np)
+ return -ENODEV;
+
+ *mac = of_get_mac_address(np);
+
+ plat->interface = of_get_phy_mode(np);
+ of_property_read_u32(np, "phy-addr", &plat->phy_addr);
+ plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
+ sizeof(struct stmmac_mdio_bus_data),
+ GFP_KERNEL);
+
+ /*
+ * Currently only the properties needed on SPEAr600
+ * are provided. All other properties should be added
+ * once needed on other platforms.
+ */
+ if (of_device_is_compatible(np, "st,spear600-gmac")) {
+ plat->pbl = 8;
+ plat->has_gmac = 1;
+ plat->pmt = 1;
+ }
+
+ return 0;
+}
+#else
+static int __devinit stmmac_probe_config_dt(struct platform_device *pdev,
+ struct plat_stmmacenet_data *plat,
+ const char **mac)
+{
+ return ERR_PTR(-ENOSYS);
+}
+#endif /* CONFIG_OF */
+
/**
* stmmac_pltfr_probe
* @pdev: platform device pointer
@@ -39,7 +81,8 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *addr = NULL;
struct stmmac_priv *priv = NULL;
- struct plat_stmmacenet_data *plat_dat;
+ struct plat_stmmacenet_data *plat_dat = NULL;
+ const char *mac = NULL;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@@ -58,7 +101,25 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
ret = -ENOMEM;
goto out_release_region;
}
- plat_dat = pdev->dev.platform_data;
+
+ if (pdev->dev.of_node) {
+ plat_dat = devm_kzalloc(&pdev->dev,
+ sizeof(struct plat_stmmacenet_data),
+ GFP_KERNEL);
+ if (!plat_dat) {
+ pr_err("%s: ERROR: no memory", __func__);
+ ret = -ENOMEM;
+ goto out_unmap;
+ }
+
+ ret = stmmac_probe_config_dt(pdev, plat_dat, &mac);
+ if (ret) {
+ pr_err("%s: main dt probe failed", __func__);
+ goto out_unmap;
+ }
+ } else {
+ plat_dat = pdev->dev.platform_data;
+ }
/* Custom initialisation (if needed)*/
if (plat_dat->init) {
@@ -73,6 +134,10 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
goto out_unmap;
}
+ /* Get MAC address if available (DT) */
+ if (mac)
+ memcpy(priv->dev->dev_addr, mac, ETH_ALEN);
+
/* Get the MAC information */
priv->dev->irq = platform_get_irq_byname(pdev, "macirq");
if (priv->dev->irq == -ENXIO) {
@@ -178,6 +243,12 @@ static const struct dev_pm_ops stmmac_pltfr_pm_ops = {
static const struct dev_pm_ops stmmac_pltfr_pm_ops;
#endif /* CONFIG_PM */
+static const struct of_device_id stmmac_dt_ids[] = {
+ { .compatible = "st,spear600-gmac", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
+
static struct platform_driver stmmac_driver = {
.probe = stmmac_pltfr_probe,
.remove = stmmac_pltfr_remove,
@@ -185,6 +256,7 @@ static struct platform_driver stmmac_driver = {
.name = STMMAC_RESOURCE_NAME,
.owner = THIS_MODULE,
.pm = &stmmac_pltfr_pm_ops,
+ .of_match_table = of_match_ptr(stmmac_dt_ids),
},
};
--
1.7.9.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists