| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1333371364-21347-4-git-send-email-stigge@antcom.de>
Date: Mon, 2 Apr 2012 14:56:00 +0200
From: Roland Stigge <stigge@...com.de>
To: arm@...nel.org, linux-arm-kernel@...ts.infradead.org,
linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
w.sang@...gutronix.de, srinivas.bakki@....com, kevin.wells@....com,
gregkh@...uxfoundation.org, netdev@...r.kernel.org,
rtc-linux@...glegroups.com, a.zummo@...ertech.it,
linux-watchdog@...r.kernel.org, wim@...ana.be
Cc: Roland Stigge <stigge@...com.de>
Subject: [PATCH 3/7] net: Add device tree support to LPC32xx
This patch adds device tree support for lpc_eth.c.
The runtime option for MII/RMII is solved via the "phy-mode" property, SRAM
("IRAM") usage for DMA can be chosen via "use-iram".
Signed-off-by: Roland Stigge <stigge@...com.de>
---
Applies to v3.4-rc1
Documentation/devicetree/bindings/net/lpc-eth.txt | 24 ++++++
drivers/net/ethernet/nxp/lpc_eth.c | 77 +++++++++++++---------
2 files changed, 70 insertions(+), 31 deletions(-)
--- /dev/null
+++ linux-2.6/Documentation/devicetree/bindings/net/lpc-eth.txt
@@ -0,0 +1,24 @@
+* NXP LPC32xx SoC Ethernet Controller
+
+Required properties:
+- compatible: Should be "nxp,lpc-eth"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain ethernet controller interrupt
+
+Optional properties:
+- phy-mode: String, operation mode of the PHY interface.
+ Supported values are: "mii" (default), "rmii"
+- use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering
+- local-mac-address : 6 bytes, mac address
+
+Example:
+
+ mac: ethernet@...60000 {
+ compatible = "nxp,lpc-eth";
+ reg = <0x31060000 0x1000>;
+ interrupt-parent = <&mic>;
+ interrupts = <29 0>;
+
+ phy-mode = "rmii";
+ use-iram;
+ };
--- linux-2.6.orig/drivers/net/ethernet/nxp/lpc_eth.c
+++ linux-2.6/drivers/net/ethernet/nxp/lpc_eth.c
@@ -340,27 +340,15 @@
*/
#define LPC_POWERDOWN_MACAHB (1 << 31)
-/* Upon the upcoming introduction of device tree usage in LPC32xx,
- * lpc_phy_interface_mode() and use_iram_for_net() will be extended with a
- * device parameter for access to device tree information at runtime, instead
- * of defining the values at compile time
- */
-static inline phy_interface_t lpc_phy_interface_mode(void)
+static phy_interface_t lpc_phy_interface_mode(struct device *dev)
{
-#ifdef CONFIG_ARCH_LPC32XX_MII_SUPPORT
+ if (dev && dev->of_node) {
+ const char *mode = of_get_property(dev->of_node,
+ "phy-mode", NULL);
+ if (mode && !strcmp(mode, "rmii"))
+ return PHY_INTERFACE_MODE_RMII;
+ }
return PHY_INTERFACE_MODE_MII;
-#else
- return PHY_INTERFACE_MODE_RMII;
-#endif
-}
-
-static inline int use_iram_for_net(void)
-{
-#ifdef CONFIG_ARCH_LPC32XX_IRAM_FOR_NET
- return 1;
-#else
- return 0;
-#endif
}
/* Receive Status information word */
@@ -450,6 +438,7 @@ struct netdata_local {
int speed;
int duplex;
struct napi_struct napi;
+ bool use_iram;
};
/*
@@ -664,7 +653,7 @@ static void __lpc_eth_init(struct netdat
LPC_ENET_CLRT(pldat->net_base));
writel(LPC_IPGR_LOAD_PART2(0x12), LPC_ENET_IPGR(pldat->net_base));
- if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII)
+ if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII)
writel(LPC_COMMAND_PASSRUNTFRAME,
LPC_ENET_COMMAND(pldat->net_base));
else {
@@ -804,12 +793,13 @@ static int lpc_mii_probe(struct net_devi
}
/* Attach to the PHY */
- if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII)
+ if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII)
netdev_info(ndev, "using MII interface\n");
else
netdev_info(ndev, "using RMII interface\n");
phydev = phy_connect(ndev, dev_name(&phydev->dev),
- &lpc_handle_link_change, 0, lpc_phy_interface_mode());
+ &lpc_handle_link_change, 0,
+ lpc_phy_interface_mode(&pldat->pdev->dev));
if (IS_ERR(phydev)) {
netdev_err(ndev, "Could not attach to PHY\n");
@@ -843,7 +833,7 @@ static int lpc_mii_init(struct netdata_l
}
/* Setup MII mode */
- if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII)
+ if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII)
writel(LPC_COMMAND_PASSRUNTFRAME,
LPC_ENET_COMMAND(pldat->net_base));
else {
@@ -1315,18 +1305,26 @@ static const struct net_device_ops lpc_n
static int lpc_eth_drv_probe(struct platform_device *pdev)
{
struct resource *res;
- struct resource *dma_res;
struct net_device *ndev;
struct netdata_local *pldat;
struct phy_device *phydev;
dma_addr_t dma_handle;
int irq, ret;
+ u32 tmp;
+
+ /* Setup network interface for RMII mode */
+ tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
+ tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
+ if (lpc_phy_interface_mode(&pdev->dev) == PHY_INTERFACE_MODE_MII)
+ tmp |= LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS;
+ else
+ tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
+ __raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
/* Get platform resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
irq = platform_get_irq(pdev, 0);
- if ((!res) || (!dma_res) || (irq < 0) || (irq >= NR_IRQS)) {
+ if ((!res) || (irq < 0) || (irq >= NR_IRQS)) {
dev_err(&pdev->dev, "error getting resources.\n");
ret = -ENXIO;
goto err_exit;
@@ -1348,6 +1346,12 @@ static int lpc_eth_drv_probe(struct plat
spin_lock_init(&pldat->lock);
+ if (pdev->dev.of_node && of_get_property(pdev->dev.of_node,
+ "use-iram", NULL))
+ pldat->use_iram = true;
+ else
+ pldat->use_iram = false;
+
/* Save resources */
ndev->irq = irq;
@@ -1389,17 +1393,19 @@ static int lpc_eth_drv_probe(struct plat
sizeof(struct txrx_desc_t) + sizeof(struct rx_status_t));
pldat->dma_buff_base_v = 0;
- if (use_iram_for_net()) {
- dma_handle = dma_res->start;
+ if (pldat->use_iram) {
+ dma_handle = LPC32XX_IRAM_BASE;
if (pldat->dma_buff_size <= lpc32xx_return_iram_size())
pldat->dma_buff_base_v =
- io_p2v(dma_res->start);
+ io_p2v(LPC32XX_IRAM_BASE);
else
netdev_err(ndev,
"IRAM not big enough for net buffers, using SDRAM instead.\n");
}
if (pldat->dma_buff_base_v == 0) {
+ pldat->pdev->dev.coherent_dma_mask = 0xFFFFFFFF;
+ pldat->pdev->dev.dma_mask = &pldat->pdev->dev.coherent_dma_mask;
pldat->dma_buff_size = PAGE_ALIGN(pldat->dma_buff_size);
/* Allocate a chunk of memory for the DMA ethernet buffers
@@ -1488,7 +1494,7 @@ err_out_unregister_netdev:
platform_set_drvdata(pdev, NULL);
unregister_netdev(ndev);
err_out_dma_unmap:
- if (!use_iram_for_net() ||
+ if (!pldat->use_iram ||
pldat->dma_buff_size > lpc32xx_return_iram_size())
dma_free_coherent(&pldat->pdev->dev, pldat->dma_buff_size,
pldat->dma_buff_base_v,
@@ -1515,7 +1521,7 @@ static int lpc_eth_drv_remove(struct pla
unregister_netdev(ndev);
platform_set_drvdata(pdev, NULL);
- if (!use_iram_for_net() ||
+ if (!pldat->use_iram ||
pldat->dma_buff_size > lpc32xx_return_iram_size())
dma_free_coherent(&pldat->pdev->dev, pldat->dma_buff_size,
pldat->dma_buff_base_v,
@@ -1584,6 +1590,14 @@ static int lpc_eth_drv_resume(struct pla
}
#endif
+#ifdef CONFIG_OF
+static const struct of_device_id lpc_eth_match[] = {
+ { .compatible = "nxp,lpc-eth" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lpc_eth_match);
+#endif
+
static struct platform_driver lpc_eth_driver = {
.probe = lpc_eth_drv_probe,
.remove = __devexit_p(lpc_eth_drv_remove),
@@ -1593,6 +1607,7 @@ static struct platform_driver lpc_eth_dr
#endif
.driver = {
.name = MODNAME,
+ .of_match_table = of_match_ptr(lpc_eth_match),
},
};
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists