Message-Id: <1333604034-17656-2-git-send-email-msink@permonline.ru>
Date:	Thu,  5 Apr 2012 11:33:53 +0600
From:	Mike Sinkovsky <msink@...monline.ru>
To:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	broonie@...nsource.wolfsonmicro.com
Cc:	Mike Sinkovsky <msink@...monline.ru>
Subject: [PATCH v9 1/2] Ethernet driver for the WIZnet W5300 chip

Based on original driver from chip manufacturer, but nearly full rewite.
Tested and used in production with Blackfin BF531 embedded processor.

Signed-off-by: Mike Sinkovsky <msink@...monline.ru>
---
 drivers/net/ethernet/Kconfig         |    1 +
 drivers/net/ethernet/Makefile        |    1 +
 drivers/net/ethernet/wiznet/Kconfig  |   65 +++
 drivers/net/ethernet/wiznet/Makefile |    1 +
 drivers/net/ethernet/wiznet/w5300.c  |  722 ++++++++++++++++++++++++++++++++++
 include/linux/platform_data/wiznet.h |   24 ++
 6 files changed, 814 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/ethernet/wiznet/Kconfig
 create mode 100644 drivers/net/ethernet/wiznet/Makefile
 create mode 100644 drivers/net/ethernet/wiznet/w5300.c
 create mode 100644 include/linux/platform_data/wiznet.h

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index c63a64c..a11af5c 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -174,6 +174,7 @@ source "drivers/net/ethernet/tile/Kconfig"
 source "drivers/net/ethernet/toshiba/Kconfig"
 source "drivers/net/ethernet/tundra/Kconfig"
 source "drivers/net/ethernet/via/Kconfig"
+source "drivers/net/ethernet/wiznet/Kconfig"
 source "drivers/net/ethernet/xilinx/Kconfig"
 source "drivers/net/ethernet/xircom/Kconfig"
 
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 9676a51..878ad32 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -73,5 +73,6 @@ obj-$(CONFIG_TILE_NET) += tile/
 obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
 obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/
 obj-$(CONFIG_NET_VENDOR_VIA) += via/
+obj-$(CONFIG_NET_VENDOR_WIZNET) += wiznet/
 obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
 obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
diff --git a/drivers/net/ethernet/wiznet/Kconfig b/drivers/net/ethernet/wiznet/Kconfig
new file mode 100644
index 0000000..f45cef1
--- /dev/null
+++ b/drivers/net/ethernet/wiznet/Kconfig
@@ -0,0 +1,65 @@
+#
+# WIZnet devices configuration
+#
+
+config NET_VENDOR_WIZNET
+	bool "WIZnet devices"
+	default y
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about WIZnet devices. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_WIZNET
+
+config WIZNET_W5300
+	tristate "WIZnet W5300 Ethernet support"
+	---help---
+	  Support for WIZnet W5300 chips.
+
+	  W5300 is a single chip with integrated 10/100 Ethernet MAC,
+	  PHY and hardware TCP/IP stack, but this driver is limited to
+	  the MAC and PHY functions only, onchip TCP/IP is unused.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called w5300.
+
+choice
+	prompt "WIZnet interface mode"
+	default WIZNET_BUS_ANY
+
+config WIZNET_BUS_DIRECT
+	bool "Direct address bus mode"
+	---help---
+	  In direct address mode host system can directly access all registers
+	  after mapping to Memory-Mapped I/O space.
+
+config WIZNET_BUS_INDIRECT
+	bool "Indirect address bus mode"
+	---help---
+	  In indirect address mode host system indirectly accesses registers
+	  using Indirect Mode Address Register and Indirect Mode Data Register,
+	  which are directly mapped to Memory-Mapped I/O space.
+
+config WIZNET_BUS_ANY
+	bool "Select interface mode in runtime"
+	---help---
+	  If interface mode is unknown in compile time, it can be selected
+	  in runtime from board/platform resources configuration.
+
+	  Performance may decrease compared to explicitly selected bus mode.
+endchoice
+
+config WIZNET_TX_FLOW
+	bool "Use transmit flow control"
+	default y
+	help
+	  This enables transmit flow control for WIZnet chips.
+	  If unsure, say Y.
+
+endif # NET_VENDOR_WIZNET
diff --git a/drivers/net/ethernet/wiznet/Makefile b/drivers/net/ethernet/wiznet/Makefile
new file mode 100644
index 0000000..88e0a3e
--- /dev/null
+++ b/drivers/net/ethernet/wiznet/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_WIZNET_W5300) += w5300.o
diff --git a/drivers/net/ethernet/wiznet/w5300.c b/drivers/net/ethernet/wiznet/w5300.c
new file mode 100644
index 0000000..88afde9
--- /dev/null
+++ b/drivers/net/ethernet/wiznet/w5300.c
@@ -0,0 +1,722 @@
+/*
+ * Ethernet driver for the WIZnet W5300 chip.
+ *
+ * Copyright (C) 2008-2009 WIZnet Co.,Ltd.
+ * Copyright (C) 2011 Taehun Kim <kth3321 <at> gmail.com>
+ * Copyright (C) 2012 Mike Sinkovsky <msink@...monline.ru>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kconfig.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/wiznet.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#define DRV_NAME	"w5300"
+#define DRV_VERSION	"2012-04-04"
+
+MODULE_DESCRIPTION("WIZnet W5300 Ethernet driver v"DRV_VERSION);
+MODULE_AUTHOR("Mike Sinkovsky <msink@...monline.ru>");
+MODULE_ALIAS("platform:"DRV_NAME);
+MODULE_LICENSE("GPL");
+
+/*
+ * Registers
+ */
+#define W5300_MR		0x0000	/* Mode Register */
+#define   MR_DBW		  (1 << 15) /* Data bus width */
+#define   MR_MPF		  (1 << 14) /* Mac layer pause frame */
+#define   MR_WDF(n)		  (((n)&7)<<11) /* Write data fetch time */
+#define   MR_RDH		  (1 << 10) /* Read data hold time */
+#define   MR_FS			  (1 << 8)  /* FIFO swap */
+#define   MR_RST		  (1 << 7)  /* S/W reset */
+#define   MR_PB			  (1 << 4)  /* Ping block */
+#define   MR_DBS		  (1 << 2)  /* Data bus swap */
+#define   MR_IND		  (1 << 0)  /* Indirect mode */
+#define W5300_IR		0x0002	/* Interrupt Register */
+#define W5300_IMR		0x0004	/* Interrupt Mask Register */
+#define   IR_S0			  0x0001  /* S0 interrupt */
+#define W5300_SHARL		0x0008	/* Source MAC address (0123) */
+#define W5300_SHARH		0x000c	/* Source MAC address (45) */
+#define W5300_TMSRL		0x0020	/* Transmit Memory Size (0123) */
+#define W5300_TMSRH		0x0024	/* Transmit Memory Size (4567) */
+#define W5300_RMSRL		0x0028	/* Receive Memory Size (0123) */
+#define W5300_RMSRH		0x002c	/* Receive Memory Size (4567) */
+#define W5300_MTYPE		0x0030	/* Memory Type */
+#define W5300_IDR		0x00fe	/* Chip ID register */
+#define   IDR_W5300		  0x5300  /* =0x5300 for WIZnet W5300 */
+#define W5300_S0_MR		0x0200	/* S0 Mode Register */
+#define   S0_MR_CLOSED		  0x0000  /* Close mode */
+#define   S0_MR_MACRAW		  0x0004  /* MAC RAW mode (promiscous) */
+#define   S0_MR_MACRAW_MF	  0x0044  /* MAC RAW mode (filtered) */
+#define W5300_S0_CR		0x0202	/* S0 Command Register */
+#define   S0_CR_OPEN		  0x0001  /* OPEN command */
+#define   S0_CR_CLOSE		  0x0010  /* CLOSE command */
+#define   S0_CR_SEND		  0x0020  /* SEND command */
+#define   S0_CR_RECV		  0x0040  /* RECV command */
+#define W5300_S0_IMR		0x0204	/* S0 Interrupt Mask Register */
+#define W5300_S0_IR		0x0206	/* S0 Interrupt Register */
+#define   S0_IR_RECV		  0x0004  /* Receive interrupt */
+#define   S0_IR_SENDOK		  0x0010  /* Send OK interrupt */
+#define W5300_S0_SSR		0x0208	/* S0 Socket Status Register */
+#define W5300_S0_TX_WRSR	0x0220	/* S0 TX Write Size Register */
+#define W5300_S0_TX_FSR		0x0224	/* S0 TX Free Size Register */
+#define W5300_S0_RX_RSR		0x0228	/* S0 Received data Size */
+#define W5300_S0_TX_FIFO	0x022e	/* S0 Transmit FIFO */
+#define W5300_S0_RX_FIFO	0x0230	/* S0 Receive FIFO */
+#define W5300_REGS_LEN		0x0400
+
+/*
+ * Device driver private data structure
+ */
+struct w5300_priv {
+	void __iomem *base;
+	spinlock_t reg_lock;
+	bool indirect;
+	u16  (*read) (struct w5300_priv *priv, u16 addr);
+	void (*write)(struct w5300_priv *priv, u16 addr, u16 data);
+	int irq;
+	int link_irq;
+	int link_gpio;
+
+	struct napi_struct napi;
+	struct net_device *ndev;
+	bool promisc;
+	u32 msg_enable;
+};
+
+/************************************************************************
+ *
+ *  Lowlevel I/O functions
+ *
+ ***********************************************************************/
+
+/*
+ * In direct address mode host system can directly access W5300 registers
+ * after mapping to Memory-Mapped I/O space.
+ *
+ * 0x400 bytes are required for memory space.
+ */
+static inline u16 w5300_read_direct(struct w5300_priv *priv, u16 addr)
+{
+	return ioread16(priv->base + (addr << CONFIG_WIZNET_BUS_SHIFT));
+}
+
+static inline void w5300_write_direct(struct w5300_priv *priv,
+				      u16 addr, u16 data)
+{
+	iowrite16(data, priv->base + (addr << CONFIG_WIZNET_BUS_SHIFT));
+}
+
+/*
+ * In indirect address mode host system indirectly accesses registers by
+ * using Indirect Mode Address Register (IDM_AR) and Indirect Mode Data
+ * Register (IDM_DR), which are directly mapped to Memory-Mapped I/O space.
+ * Mode Register (MR) is directly accessible.
+ *
+ * Only 0x06 bytes are required for memory space.
+ */
+#define W5300_IDM_AR		0x0002	 /* Indirect Mode Address */
+#define W5300_IDM_DR		0x0004	 /* Indirect Mode Data */
+
+static u16 w5300_read_indirect(struct w5300_priv *priv, u16 addr)
+{
+	unsigned long flags;
+	u16 data;
+
+	spin_lock_irqsave(&priv->reg_lock, flags);
+	w5300_write_direct(priv, W5300_IDM_AR, addr);
+	mmiowb();
+	data = w5300_read_direct(priv, W5300_IDM_DR);
+	spin_unlock_irqrestore(&priv->reg_lock, flags);
+
+	return data;
+}
+
+static void w5300_write_indirect(struct w5300_priv *priv, u16 addr, u16 data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->reg_lock, flags);
+	w5300_write_direct(priv, W5300_IDM_AR, addr);
+	mmiowb();
+	w5300_write_direct(priv, W5300_IDM_DR, data);
+	mmiowb();
+	spin_unlock_irqrestore(&priv->reg_lock, flags);
+}
+
+#if defined(CONFIG_WIZNET_BUS_DIRECT)
+#define w5300_read	w5300_read_direct
+#define w5300_write	w5300_write_direct
+
+#elif defined(CONFIG_WIZNET_BUS_INDIRECT)
+#define w5300_read	w5300_read_indirect
+#define w5300_write	w5300_write_indirect
+
+#else /* CONFIG_WIZNET_BUS_ANY */
+#define w5300_read	priv->read
+#define w5300_write	priv->write
+#endif
+
+static u32 w5300_read32(struct w5300_priv *priv, u16 addr)
+{
+	u32 data;
+	data  = w5300_read(priv, addr) << 16;
+	data |= w5300_read(priv, addr + 2);
+	return data;
+}
+
+static void w5300_write32(struct w5300_priv *priv, u16 addr, u32 data)
+{
+	w5300_write(priv, addr, data >> 16);
+	w5300_write(priv, addr + 2, data);
+}
+
+static int w5300_command(struct w5300_priv *priv, u16 cmd)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(100);
+
+	w5300_write(priv, W5300_S0_CR, cmd);
+	mmiowb();
+
+	while (w5300_read(priv, W5300_S0_CR) != 0) {
+		if (time_after(jiffies, timeout))
+			return -EIO;
+		cpu_relax();
+	}
+
+	return 0;
+}
+
+static void w5300_read_frame(struct w5300_priv *priv, u8 *buf, int len)
+{
+	u16 fifo;
+	int i;
+
+	for (i = 0; i < len; i += 2) {
+		fifo = w5300_read(priv, W5300_S0_RX_FIFO);
+		*buf++ = fifo >> 8;
+		*buf++ = fifo;
+	}
+	fifo = w5300_read(priv, W5300_S0_RX_FIFO);
+	fifo = w5300_read(priv, W5300_S0_RX_FIFO);
+}
+
+static void w5300_write_frame(struct w5300_priv *priv, u8 *buf, int len)
+{
+	u16 fifo;
+	int i;
+
+	for (i = 0; i < len; i += 2) {
+		fifo  = *buf++ << 8;
+		fifo |= *buf++;
+		w5300_write(priv, W5300_S0_TX_FIFO, fifo);
+	}
+	w5300_write32(priv, W5300_S0_TX_WRSR, len);
+}
+
+static void w5300_write_macaddr(struct w5300_priv *priv)
+{
+	struct net_device *ndev = priv->ndev;
+	w5300_write32(priv, W5300_SHARL,
+		      ndev->dev_addr[0] << 24 |
+		      ndev->dev_addr[1] << 16 |
+		      ndev->dev_addr[2] << 8 |
+		      ndev->dev_addr[3]);
+	w5300_write(priv, W5300_SHARH,
+		      ndev->dev_addr[4] << 8 |
+		      ndev->dev_addr[5]);
+	mmiowb();
+}
+
+static void w5300_hw_reset(struct w5300_priv *priv)
+{
+	w5300_write_direct(priv, W5300_MR, MR_RST);
+	mmiowb();
+	mdelay(5);
+	w5300_write_direct(priv, W5300_MR, priv->indirect ?
+				 MR_WDF(7) | MR_PB | MR_IND :
+				 MR_WDF(7) | MR_PB);
+	mmiowb();
+	w5300_write(priv, W5300_IMR, 0);
+	w5300_write_macaddr(priv);
+
+	/* Configure 128K of internal memory
+	 * as 64K RX fifo and 64K TX fifo
+	 */
+	w5300_write32(priv, W5300_RMSRL, 64 << 24);
+	w5300_write32(priv, W5300_RMSRH, 0);
+	w5300_write32(priv, W5300_TMSRL, 64 << 24);
+	w5300_write32(priv, W5300_TMSRH, 0);
+	w5300_write(priv, W5300_MTYPE, 0x00ff);
+	mmiowb();
+}
+
+static void w5300_hw_start(struct w5300_priv *priv)
+{
+	w5300_write(priv, W5300_S0_MR, priv->promisc ?
+			  S0_MR_MACRAW : S0_MR_MACRAW_MF);
+	mmiowb();
+	w5300_command(priv, S0_CR_OPEN);
+	w5300_write(priv, W5300_S0_IMR, IS_ENABLED(CONFIG_WIZNET_TX_FLOW) ?
+					S0_IR_RECV | S0_IR_SENDOK :
+					S0_IR_RECV);
+	w5300_write(priv, W5300_IMR, IR_S0);
+	mmiowb();
+}
+
+static void w5300_hw_close(struct w5300_priv *priv)
+{
+	w5300_write(priv, W5300_IMR, 0);
+	mmiowb();
+	w5300_command(priv, S0_CR_CLOSE);
+}
+
+/***********************************************************************
+ *
+ *   Device driver functions / callbacks
+ *
+ ***********************************************************************/
+
+static void w5300_get_drvinfo(struct net_device *ndev,
+			      struct ethtool_drvinfo *info)
+{
+	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+	strlcpy(info->bus_info, dev_name(ndev->dev.parent),
+		sizeof(info->bus_info));
+}
+
+static u32 w5300_get_link(struct net_device *ndev)
+{
+	struct w5300_priv *priv = netdev_priv(ndev);
+
+	if (gpio_is_valid(priv->link_gpio))
+		return !!gpio_get_value(priv->link_gpio);
+
+	return 1;
+}
+
+static u32 w5300_get_msglevel(struct net_device *ndev)
+{
+	struct w5300_priv *priv = netdev_priv(ndev);
+
+	return priv->msg_enable;
+}
+
+static void w5300_set_msglevel(struct net_device *ndev, u32 value)
+{
+	struct w5300_priv *priv = netdev_priv(ndev);
+
+	priv->msg_enable = value;
+}
+
+static int w5300_get_regs_len(struct net_device *ndev)
+{
+	return W5300_REGS_LEN;
+}
+
+static void w5300_get_regs(struct net_device *ndev,
+			   struct ethtool_regs *regs, void *_buf)
+{
+	struct w5300_priv *priv = netdev_priv(ndev);
+	u8 *buf = _buf;
+	u16 addr;
+	u16 data;
+
+	regs->version = 1;
+	for (addr = 0; addr < W5300_REGS_LEN; addr += 2) {
+		switch (addr & 0x23f) {
+		case W5300_S0_TX_FIFO: /* cannot read TX_FIFO */
+		case W5300_S0_RX_FIFO: /* cannot read RX_FIFO */
+			data = 0xffff;
+			break;
+		default:
+			data = w5300_read(priv, addr);
+			break;
+		}
+		*buf++ = data >> 8;
+		*buf++ = data;
+	}
+}
+
+static void w5300_tx_timeout(struct net_device *ndev)
+{
+	struct w5300_priv *priv = netdev_priv(ndev);
+
+	netif_stop_queue(ndev);
+	w5300_hw_reset(priv);
+	w5300_hw_start(priv);
+	ndev->stats.tx_errors++;
+	ndev->trans_start = jiffies;
+	netif_wake_queue(ndev);
+}
+
+static int w5300_start_tx(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct w5300_priv *priv = netdev_priv(ndev);
+
+	if (IS_ENABLED(CONFIG_WIZNET_TX_FLOW))
+		netif_stop_queue(ndev);
+
+	w5300_write_frame(priv, skb->data, skb->len);
+	mmiowb();
+	ndev->stats.tx_packets++;
+	ndev->stats.tx_bytes += skb->len;
+	dev_kfree_skb(skb);
+	netif_dbg(priv, tx_queued, ndev, "tx queued\n");
+
+	w5300_command(priv, S0_CR_SEND);
+
+	return NETDEV_TX_OK;
+}
+
+static int w5300_napi_poll(struct napi_struct *napi, int budget)
+{
+	struct w5300_priv *priv = container_of(napi, struct w5300_priv, napi);
+	struct net_device *ndev = priv->ndev;
+	struct sk_buff *skb;
+	int rx_count;
+	u16 rx_len;
+
+	for (rx_count = 0; rx_count < budget; rx_count++) {
+		u32 rx_fifo_len = w5300_read32(priv, W5300_S0_RX_RSR);
+		if (rx_fifo_len == 0)
+			break;
+
+		rx_len = w5300_read(priv, W5300_S0_RX_FIFO);
+
+		skb = netdev_alloc_skb_ip_align(ndev, roundup(rx_len, 2));
+		if (unlikely(!skb)) {
+			u32 i;
+			for (i = 0; i < rx_fifo_len; i += 2)
+				w5300_read(priv, W5300_S0_RX_FIFO);
+			ndev->stats.rx_dropped++;
+			return -ENOMEM;
+		}
+
+		skb_put(skb, rx_len);
+		w5300_read_frame(priv, skb->data, rx_len);
+		skb->protocol = eth_type_trans(skb, ndev);
+
+		netif_receive_skb(skb);
+		ndev->stats.rx_packets++;
+		ndev->stats.rx_bytes += rx_len;
+	}
+
+	if (rx_count < budget) {
+		w5300_write(priv, W5300_IMR, IR_S0);
+		mmiowb();
+		napi_complete(napi);
+	}
+
+	return rx_count;
+}
+
+static irqreturn_t w5300_interrupt(int irq, void *ndev_instance)
+{
+	struct net_device *ndev = ndev_instance;
+	struct w5300_priv *priv = netdev_priv(ndev);
+
+	int ir = w5300_read(priv, W5300_S0_IR);
+	if (!ir)
+		return IRQ_NONE;
+	w5300_write(priv, W5300_S0_IR, ir);
+	mmiowb();
+
+	if (IS_ENABLED(CONFIG_WIZNET_TX_FLOW) && (ir & S0_IR_SENDOK)) {
+		netif_dbg(priv, tx_done, ndev, "tx done\n");
+		netif_wake_queue(ndev);
+	}
+
+	if (ir & S0_IR_RECV) {
+		if (napi_schedule_prep(&priv->napi)) {
+			w5300_write(priv, W5300_IMR, 0);
+			mmiowb();
+			__napi_schedule(&priv->napi);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t w5300_detect_link(int irq, void *ndev_instance)
+{
+	struct net_device *ndev = ndev_instance;
+	struct w5300_priv *priv = netdev_priv(ndev);
+
+	if (netif_running(ndev)) {
+		if (gpio_get_value(priv->link_gpio) != 0) {
+			netif_info(priv, link, ndev, "link is up\n");
+			netif_carrier_on(ndev);
+		} else {
+			netif_info(priv, link, ndev, "link is down\n");
+			netif_carrier_off(ndev);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void w5300_set_rx_mode(struct net_device *ndev)
+{
+	struct w5300_priv *priv = netdev_priv(ndev);
+	bool set_promisc = (ndev->flags & IFF_PROMISC) != 0;
+
+	if (priv->promisc != set_promisc) {
+		priv->promisc = set_promisc;
+		w5300_hw_start(priv);
+	}
+}
+
+static int w5300_set_macaddr(struct net_device *ndev, void *addr)
+{
+	struct w5300_priv *priv = netdev_priv(ndev);
+	struct sockaddr *sock_addr = addr;
+
+	if (!is_valid_ether_addr(sock_addr->sa_data))
+		return -EADDRNOTAVAIL;
+	memcpy(ndev->dev_addr, sock_addr->sa_data, ETH_ALEN);
+	ndev->addr_assign_type &= ~NET_ADDR_RANDOM;
+	w5300_write_macaddr(priv);
+	return 0;
+}
+
+static int w5300_open(struct net_device *ndev)
+{
+	struct w5300_priv *priv = netdev_priv(ndev);
+
+	netif_info(priv, ifup, ndev, "enabling\n");
+	if (!is_valid_ether_addr(ndev->dev_addr))
+		return -EINVAL;
+	w5300_hw_start(priv);
+	napi_enable(&priv->napi);
+	netif_start_queue(ndev);
+	if (!gpio_is_valid(priv->link_gpio) ||
+	    gpio_get_value(priv->link_gpio) != 0)
+		netif_carrier_on(ndev);
+	return 0;
+}
+
+static int w5300_stop(struct net_device *ndev)
+{
+	struct w5300_priv *priv = netdev_priv(ndev);
+
+	netif_info(priv, ifdown, ndev, "shutting down\n");
+	w5300_hw_close(priv);
+	netif_carrier_off(ndev);
+	netif_stop_queue(ndev);
+	napi_disable(&priv->napi);
+	return 0;
+}
+
+static const struct ethtool_ops w5300_ethtool_ops = {
+	.get_drvinfo		= w5300_get_drvinfo,
+	.get_msglevel		= w5300_get_msglevel,
+	.set_msglevel		= w5300_set_msglevel,
+	.get_link		= w5300_get_link,
+	.get_regs_len		= w5300_get_regs_len,
+	.get_regs		= w5300_get_regs,
+};
+
+static const struct net_device_ops w5300_netdev_ops = {
+	.ndo_open		= w5300_open,
+	.ndo_stop		= w5300_stop,
+	.ndo_start_xmit		= w5300_start_tx,
+	.ndo_tx_timeout		= w5300_tx_timeout,
+	.ndo_set_rx_mode	= w5300_set_rx_mode,
+	.ndo_set_mac_address	= w5300_set_macaddr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
+static int __devinit w5300_hw_probe(struct platform_device *pdev)
+{
+	struct wiznet_platform_data *data = pdev->dev.platform_data;
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct w5300_priv *priv = netdev_priv(ndev);
+	const char *name = netdev_name(ndev);
+	struct resource *mem;
+	int mem_size;
+	int irq;
+	int ret;
+
+	if (data && is_valid_ether_addr(data->mac_addr)) {
+		memcpy(ndev->dev_addr, data->mac_addr, ETH_ALEN);
+	} else {
+		random_ether_addr(ndev->dev_addr);
+		ndev->addr_assign_type |= NET_ADDR_RANDOM;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem)
+		return -ENXIO;
+	mem_size = resource_size(mem);
+	if (!devm_request_mem_region(&pdev->dev, mem->start, mem_size, name))
+		return -EBUSY;
+	priv->base = devm_ioremap(&pdev->dev, mem->start, mem_size);
+	if (!priv->base)
+		return -EBUSY;
+
+	spin_lock_init(&priv->reg_lock);
+	priv->indirect = mem_size < W5300_BUS_DIRECT_SIZE;
+	if (priv->indirect) {
+		priv->read  = w5300_read_indirect;
+		priv->write = w5300_write_indirect;
+	} else {
+		priv->read  = w5300_read_direct;
+		priv->write = w5300_write_direct;
+	}
+
+	w5300_hw_reset(priv);
+	if (w5300_read(priv, W5300_IDR) != IDR_W5300)
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+	ret = request_irq(irq, w5300_interrupt,
+			  IRQ_TYPE_LEVEL_LOW, name, ndev);
+	if (ret < 0)
+		return ret;
+	priv->irq = irq;
+
+	priv->link_gpio = data->link_gpio;
+	if (gpio_is_valid(priv->link_gpio)) {
+		char *link_name = devm_kzalloc(&pdev->dev, 16, GFP_KERNEL);
+		if (!link_name)
+			return -ENOMEM;
+		snprintf(link_name, 16, "%s-link", name);
+		priv->link_irq = gpio_to_irq(priv->link_gpio);
+		if (request_any_context_irq(priv->link_irq, w5300_detect_link,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				link_name, priv->ndev) < 0)
+			priv->link_gpio = -EINVAL;
+	}
+
+	netdev_info(ndev, "at 0x%llx irq %d\n", (u64)mem->start, irq);
+	return 0;
+}
+
+static int __devinit w5300_probe(struct platform_device *pdev)
+{
+	struct w5300_priv *priv;
+	struct net_device *ndev;
+	int err;
+
+	ndev = alloc_etherdev(sizeof(*priv));
+	if (!ndev)
+		return -ENOMEM;
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+	platform_set_drvdata(pdev, ndev);
+	priv = netdev_priv(ndev);
+	priv->ndev = ndev;
+
+	ether_setup(ndev);
+	ndev->netdev_ops = &w5300_netdev_ops;
+	ndev->ethtool_ops = &w5300_ethtool_ops;
+	ndev->watchdog_timeo = HZ;
+	netif_napi_add(ndev, &priv->napi, w5300_napi_poll, 16);
+
+	/* This chip doesn't support VLAN packets with normal MTU,
+	 * so disable VLAN for this device.
+	 */
+	ndev->features |= NETIF_F_VLAN_CHALLENGED;
+
+	err = register_netdev(ndev);
+	if (err < 0)
+		goto err_register;
+
+	err = w5300_hw_probe(pdev);
+	if (err < 0)
+		goto err_hw_probe;
+
+	return 0;
+
+err_hw_probe:
+	unregister_netdev(ndev);
+err_register:
+	free_netdev(ndev);
+	platform_set_drvdata(pdev, NULL);
+	return err;
+}
+
+static int __devexit w5300_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct w5300_priv *priv = netdev_priv(ndev);
+
+	w5300_hw_reset(priv);
+	free_irq(priv->irq, ndev);
+	if (gpio_is_valid(priv->link_gpio))
+		free_irq(priv->link_irq, ndev);
+
+	unregister_netdev(ndev);
+	free_netdev(ndev);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int w5300_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct w5300_priv *priv = netdev_priv(ndev);
+
+	if (netif_running(ndev)) {
+		netif_carrier_off(ndev);
+		netif_device_detach(ndev);
+
+		w5300_hw_close(priv);
+	}
+	return 0;
+}
+
+static int w5300_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct w5300_priv *priv = netdev_priv(ndev);
+
+	if (!netif_running(ndev)) {
+		w5300_hw_reset(priv);
+		w5300_hw_start(priv);
+
+		netif_device_attach(ndev);
+		if (!gpio_is_valid(priv->link_gpio) ||
+		    gpio_get_value(priv->link_gpio) != 0)
+			netif_carrier_on(ndev);
+	}
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static SIMPLE_DEV_PM_OPS(w5300_pm_ops, w5300_suspend, w5300_resume);
+
+static struct platform_driver w5300_driver = {
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &w5300_pm_ops,
+	},
+	.probe		= w5300_probe,
+	.remove		= __devexit_p(w5300_remove),
+};
+
+module_platform_driver(w5300_driver);
diff --git a/include/linux/platform_data/wiznet.h b/include/linux/platform_data/wiznet.h
new file mode 100644
index 0000000..b5d8c19
--- /dev/null
+++ b/include/linux/platform_data/wiznet.h
@@ -0,0 +1,24 @@
+/*
+ * Ethernet driver for the WIZnet W5x00 chip.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef PLATFORM_DATA_WIZNET_H
+#define PLATFORM_DATA_WIZNET_H
+
+#include <linux/if_ether.h>
+
+struct wiznet_platform_data {
+	int	link_gpio;
+	u8	mac_addr[ETH_ALEN];
+};
+
+#ifndef CONFIG_WIZNET_BUS_SHIFT
+#define CONFIG_WIZNET_BUS_SHIFT 0
+#endif
+
+#define W5100_BUS_DIRECT_SIZE	(0x8000 << CONFIG_WIZNET_BUS_SHIFT)
+#define W5300_BUS_DIRECT_SIZE	(0x0400 << CONFIG_WIZNET_BUS_SHIFT)
+
+#endif /* PLATFORM_DATA_WIZNET_H */
-- 
1.6.3.3


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists