| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1333611211-1032-4-git-send-email-amirv@mellanox.com>
Date: Thu, 5 Apr 2012 10:33:26 +0300
From: Amir Vadai <amirv@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Roland Dreier <roland@...estorage.com>,
Yevgeny Petrilin <yevgenyp@...lanox.com>,
Oren Duer <oren@...lanox.com>,
Amir Vadai <amirv@....mellanox.co.il>,
Amir Vadai <amirv@...lanox.com>
Subject: [PATCH net-next V7 3/8] net/mlx4_en: DCB QoS support
Set TSA, promised BW and PFC using IEEE 802.1qaz netlink commands.
Signed-off-by: Amir Vadai <amirv@...lanox.com>
---
drivers/net/ethernet/mellanox/mlx4/Kconfig | 12 ++
drivers/net/ethernet/mellanox/mlx4/Makefile | 1 +
drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 209 ++++++++++++++++++++++++
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 5 +
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 21 +++
5 files changed, 248 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig
index 1bb9353..5f027f9 100644
--- a/drivers/net/ethernet/mellanox/mlx4/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig
@@ -11,6 +11,18 @@ config MLX4_EN
This driver supports Mellanox Technologies ConnectX Ethernet
devices.
+config MLX4_EN_DCB
+ bool "Data Center Bridging (DCB) Support"
+ default y
+ depends on MLX4_EN && DCB
+ ---help---
+ Say Y here if you want to use Data Center Bridging (DCB) in the
+ driver.
+ If set to N, will not be able to configure QoS and ratelimit attributes.
+ This flag is depended on the kernel's DCB support.
+
+ If unsure, set to Y
+
config MLX4_CORE
tristate
depends on PCI
diff --git a/drivers/net/ethernet/mellanox/mlx4/Makefile b/drivers/net/ethernet/mellanox/mlx4/Makefile
index 4a40ab9..293127d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/Makefile
+++ b/drivers/net/ethernet/mellanox/mlx4/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_MLX4_EN) += mlx4_en.o
mlx4_en-y := en_main.o en_tx.o en_rx.o en_ethtool.o en_port.o en_cq.o \
en_resources.o en_netdev.o en_selftest.o
+mlx4_en-$(CONFIG_MLX4_EN_DCB) += en_dcb_nl.o
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
new file mode 100644
index 0000000..6892320
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (c) 2011 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/dcbnl.h>
+
+#include "mlx4_en.h"
+
+static int mlx4_en_dcbnl_ieee_getets(struct net_device *dev,
+ struct ieee_ets *ets)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ struct ieee_ets *my_ets = &priv->ets;
+
+ /* No IEEE PFC settings available */
+ if (!my_ets)
+ return -EINVAL;
+
+ ets->ets_cap = IEEE_8021QAZ_MAX_TCS;
+ ets->cbs = my_ets->cbs;
+ memcpy(ets->tc_tx_bw, my_ets->tc_tx_bw, sizeof(ets->tc_tx_bw));
+ memcpy(ets->tc_tsa, my_ets->tc_tsa, sizeof(ets->tc_tsa));
+ memcpy(ets->prio_tc, my_ets->prio_tc, sizeof(ets->prio_tc));
+
+ return 0;
+}
+
+static int mlx4_en_ets_validate(struct mlx4_en_priv *priv, struct ieee_ets *ets)
+{
+ int i;
+ int total_ets_bw = 0;
+ int has_ets_tc = 0;
+
+ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
+ if (ets->prio_tc[i] > MLX4_EN_NUM_UP) {
+ en_err(priv, "Bad priority in UP <=> TC mapping. TC: %d, UP: %d\n",
+ i, ets->prio_tc[i]);
+ return -EINVAL;
+ }
+
+ switch (ets->tc_tsa[i]) {
+ case IEEE_8021QAZ_TSA_STRICT:
+ break;
+ case IEEE_8021QAZ_TSA_ETS:
+ has_ets_tc = 1;
+ total_ets_bw += ets->tc_tx_bw[i];
+ break;
+ default:
+ en_err(priv, "TC[%d]: Not supported TSA: %d\n",
+ i, ets->tc_tsa[i]);
+ return -ENOTSUPP;
+ }
+ }
+
+ if (has_ets_tc && total_ets_bw != MLX4_EN_BW_MAX) {
+ en_err(priv, "Bad ETS BW sum: %d. Should be exactly 100%%\n",
+ total_ets_bw);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int mlx4_en_config_port_scheduler(struct mlx4_en_priv *priv,
+ struct ieee_ets *ets, u16 *ratelimit)
+{
+ struct mlx4_en_dev *mdev = priv->mdev;
+ int num_strict = 0;
+ int i;
+ __u8 tc_tx_bw[IEEE_8021QAZ_MAX_TCS] = { 0 };
+ __u8 pg[IEEE_8021QAZ_MAX_TCS] = { 0 };
+
+ ets = ets ?: &priv->ets;
+
+ /* higher TC means higher priority => lower pg */
+ for (i = IEEE_8021QAZ_MAX_TCS - 1; i >= 0; i--) {
+ switch (ets->tc_tsa[i]) {
+ case IEEE_8021QAZ_TSA_STRICT:
+ pg[i] = num_strict++;
+ tc_tx_bw[i] = MLX4_EN_BW_MAX;
+ break;
+ case IEEE_8021QAZ_TSA_ETS:
+ pg[i] = MLX4_EN_TC_ETS;
+ tc_tx_bw[i] = ets->tc_tx_bw[i] ?: MLX4_EN_BW_MIN;
+ break;
+ }
+ }
+
+ return mlx4_SET_PORT_SCHEDULER(mdev->dev, priv->port, tc_tx_bw, pg,
+ ratelimit);
+}
+
+static int
+mlx4_en_dcbnl_ieee_setets(struct net_device *dev, struct ieee_ets *ets)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ struct mlx4_en_dev *mdev = priv->mdev;
+ int err;
+
+ err = mlx4_en_ets_validate(priv, ets);
+ if (err)
+ return err;
+
+ err = mlx4_SET_PORT_PRIO2TC(mdev->dev, priv->port, ets->prio_tc);
+ if (err)
+ return err;
+
+ err = mlx4_en_config_port_scheduler(priv, ets, NULL);
+ if (err)
+ return err;
+
+ memcpy(&priv->ets, ets, sizeof(priv->ets));
+
+ return 0;
+}
+
+static int mlx4_en_dcbnl_ieee_getpfc(struct net_device *dev,
+ struct ieee_pfc *pfc)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+
+ pfc->pfc_cap = IEEE_8021QAZ_MAX_TCS;
+ pfc->pfc_en = priv->prof->tx_ppp;
+
+ return 0;
+}
+
+static int mlx4_en_dcbnl_ieee_setpfc(struct net_device *dev,
+ struct ieee_pfc *pfc)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ struct mlx4_en_dev *mdev = priv->mdev;
+ int err;
+
+ en_dbg(DRV, priv, "cap: 0x%x en: 0x%x mbc: 0x%x delay: %d\n",
+ pfc->pfc_cap,
+ pfc->pfc_en,
+ pfc->mbc,
+ pfc->delay);
+
+ priv->prof->rx_pause = priv->prof->tx_pause = !!pfc->pfc_en;
+ priv->prof->rx_ppp = priv->prof->tx_ppp = pfc->pfc_en;
+
+ err = mlx4_SET_PORT_general(mdev->dev, priv->port,
+ priv->rx_skb_size + ETH_FCS_LEN,
+ priv->prof->tx_pause,
+ priv->prof->tx_ppp,
+ priv->prof->rx_pause,
+ priv->prof->rx_ppp);
+ if (err)
+ en_err(priv, "Failed setting pause params\n");
+
+ return err;
+}
+
+static u8 mlx4_en_dcbnl_getdcbx(struct net_device *dev)
+{
+ return DCB_CAP_DCBX_VER_IEEE;
+}
+
+static u8 mlx4_en_dcbnl_setdcbx(struct net_device *dev, u8 mode)
+{
+ if ((mode & DCB_CAP_DCBX_LLD_MANAGED) ||
+ (mode & DCB_CAP_DCBX_VER_CEE) ||
+ !(mode & DCB_CAP_DCBX_VER_IEEE) ||
+ !(mode & DCB_CAP_DCBX_HOST))
+ return 1;
+
+ return 0;
+}
+
+const struct dcbnl_rtnl_ops mlx4_en_dcbnl_ops = {
+ .ieee_getets = mlx4_en_dcbnl_ieee_getets,
+ .ieee_setets = mlx4_en_dcbnl_ieee_setets,
+ .ieee_getpfc = mlx4_en_dcbnl_ieee_getpfc,
+ .ieee_setpfc = mlx4_en_dcbnl_ieee_setpfc,
+
+ .getdcbx = mlx4_en_dcbnl_getdcbx,
+ .setdcbx = mlx4_en_dcbnl_setdcbx,
+};
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 2322622..107f005 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -967,6 +967,7 @@ void mlx4_en_destroy_netdev(struct net_device *dev)
mutex_unlock(&mdev->state_lock);
mlx4_en_free_resources(priv);
+
free_netdev(dev);
}
@@ -1080,6 +1081,10 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
+#ifdef CONFIG_MLX4_EN_DCB
+ if (!mlx4_is_slave(priv->mdev->dev))
+ dev->dcbnl_ops = &mlx4_en_dcbnl_ops;
+#endif
/* Query for default mac and max mtu */
priv->max_mtu = mdev->dev->caps.eth_mtu_cap[priv->port];
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 5bd7c2a..97d4f35 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -40,6 +40,9 @@
#include <linux/mutex.h>
#include <linux/netdevice.h>
#include <linux/if_vlan.h>
+#ifdef CONFIG_MLX4_EN_DCB
+#include <linux/dcbnl.h>
+#endif
#include <linux/mlx4/device.h>
#include <linux/mlx4/qp.h>
@@ -110,6 +113,7 @@ enum {
#define MLX4_EN_NUM_TX_RINGS 8
#define MLX4_EN_NUM_PPP_RINGS 8
#define MAX_TX_RINGS (MLX4_EN_NUM_TX_RINGS + MLX4_EN_NUM_PPP_RINGS)
+#define MLX4_EN_NUM_UP 8
#define MLX4_EN_DEF_TX_RING_SIZE 512
#define MLX4_EN_DEF_RX_RING_SIZE 1024
@@ -410,6 +414,15 @@ struct mlx4_en_frag_info {
};
+#ifdef CONFIG_MLX4_EN_DCB
+/* Minimal TC BW - setting to 0 will block traffic */
+#define MLX4_EN_BW_MIN 1
+#define MLX4_EN_BW_MAX 100 /* Utilize 100% of the line */
+
+#define MLX4_EN_TC_ETS 7
+
+#endif
+
struct mlx4_en_priv {
struct mlx4_en_dev *mdev;
struct mlx4_en_port_profile *prof;
@@ -483,6 +496,10 @@ struct mlx4_en_priv {
int vids[128];
bool wol;
struct device *ddev;
+
+#ifdef CONFIG_MLX4_EN_DCB
+ struct ieee_ets ets;
+#endif
};
enum mlx4_en_wol {
@@ -557,6 +574,10 @@ int mlx4_SET_VLAN_FLTR(struct mlx4_dev *dev, struct mlx4_en_priv *priv);
int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset);
int mlx4_en_QUERY_PORT(struct mlx4_en_dev *mdev, u8 port);
+#ifdef CONFIG_MLX4_EN_DCB
+extern const struct dcbnl_rtnl_ops mlx4_en_dcbnl_ops;
+#endif
+
#define MLX4_EN_NUM_SELF_TEST 5
void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf);
u64 mlx4_en_mac_to_u64(u8 *addr);
--
1.7.8.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists