[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <83b453d5ea2df18d0af1a760e458c5b649415bfd.1333704409.git.romieu@fr.zoreil.com>
Date: Fri, 6 Apr 2012 12:06:47 +0200
From: Francois Romieu <romieu@...zoreil.com>
To: netdev@...r.kernel.org
Cc: "David Miller" <davem@...emloft.net>,
Grant Grundler <grundler@...isc-linux.org>
Subject: [PATCH net-next #2 33/39] dmfe: stop using net_device.{base_addr, irq} and convert to __iomem.
This is a pure PCI driver, no ISA here.
Signed-off-by: Francois Romieu <romieu@...zoreil.com>
Cc: Grant Grundler <grundler@...isc-linux.org>
---
drivers/net/ethernet/dec/tulip/dmfe.c | 295 +++++++++++++++++----------------
1 files changed, 153 insertions(+), 142 deletions(-)
diff --git a/drivers/net/ethernet/dec/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c
index 1eccf49..0ef5b68 100644
--- a/drivers/net/ethernet/dec/tulip/dmfe.c
+++ b/drivers/net/ethernet/dec/tulip/dmfe.c
@@ -150,6 +150,12 @@
#define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */
#define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */
+#define dw32(reg, val) iowrite32(val, ioaddr + (reg))
+#define dw16(reg, val) iowrite16(val, ioaddr + (reg))
+#define dr32(reg) ioread32(ioaddr + (reg))
+#define dr16(reg) ioread16(ioaddr + (reg))
+#define dr8(reg) ioread8(ioaddr + (reg))
+
#define DMFE_DBUG(dbug_now, msg, value) \
do { \
if (dmfe_debug || (dbug_now)) \
@@ -178,14 +184,6 @@
#define SROM_V41_CODE 0x14
-#define SROM_CLK_WRITE(data, ioaddr) \
- outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
- udelay(5); \
- outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \
- udelay(5); \
- outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
- udelay(5);
-
#define __CHK_IO_SIZE(pci_id, dev_rev) \
(( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \
DM9102A_IO_SIZE: DM9102_IO_SIZE)
@@ -213,11 +211,11 @@ struct rx_desc {
struct dmfe_board_info {
u32 chip_id; /* Chip vendor/Device ID */
u8 chip_revision; /* Chip revision */
- struct DEVICE *next_dev; /* next device */
+ struct net_device *next_dev; /* next device */
struct pci_dev *pdev; /* PCI device */
spinlock_t lock;
- long ioaddr; /* I/O base address */
+ void __iomem *ioaddr; /* I/O base address */
u32 cr0_data;
u32 cr5_data;
u32 cr6_data;
@@ -320,20 +318,20 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *, struct DEVICE *);
static int dmfe_stop(struct DEVICE *);
static void dmfe_set_filter_mode(struct DEVICE *);
static const struct ethtool_ops netdev_ethtool_ops;
-static u16 read_srom_word(long ,int);
+static u16 read_srom_word(void __iomem *, int);
static irqreturn_t dmfe_interrupt(int , void *);
#ifdef CONFIG_NET_POLL_CONTROLLER
static void poll_dmfe (struct net_device *dev);
#endif
-static void dmfe_descriptor_init(struct net_device *, unsigned long);
+static void dmfe_descriptor_init(struct net_device *);
static void allocate_rx_buffer(struct net_device *);
-static void update_cr6(u32, unsigned long);
+static void update_cr6(u32, void __iomem *);
static void send_filter_frame(struct DEVICE *);
static void dm9132_id_table(struct DEVICE *);
-static u16 phy_read(unsigned long, u8, u8, u32);
-static void phy_write(unsigned long, u8, u8, u16, u32);
-static void phy_write_1bit(unsigned long, u32);
-static u16 phy_read_1bit(unsigned long);
+static u16 phy_read(void __iomem *, u8, u8, u32);
+static void phy_write(void __iomem *, u8, u8, u16, u32);
+static void phy_write_1bit(void __iomem *, u32);
+static u16 phy_read_1bit(void __iomem *);
static u8 dmfe_sense_speed(struct dmfe_board_info *);
static void dmfe_process_mode(struct dmfe_board_info *);
static void dmfe_timer(unsigned long);
@@ -462,14 +460,16 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
db->buf_pool_dma_start = db->buf_pool_dma_ptr;
db->chip_id = ent->driver_data;
- db->ioaddr = pci_resource_start(pdev, 0);
+ /* IO type range. */
+ db->ioaddr = pci_iomap(pdev, 0, 0);
+ if (!db->ioaddr)
+ goto err_out_free_buf;
+
db->chip_revision = pdev->revision;
db->wol_mode = 0;
db->pdev = pdev;
- dev->base_addr = db->ioaddr;
- dev->irq = pdev->irq;
pci_set_drvdata(pdev, dev);
dev->netdev_ops = &netdev_ops;
dev->ethtool_ops = &netdev_ethtool_ops;
@@ -484,9 +484,10 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
db->chip_type = 0;
/* read 64 word srom data */
- for (i = 0; i < 64; i++)
+ for (i = 0; i < 64; i++) {
((__le16 *) db->srom)[i] =
cpu_to_le16(read_srom_word(db->ioaddr, i));
+ }
/* Set Node address */
for (i = 0; i < 6; i++)
@@ -494,16 +495,18 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
err = register_netdev (dev);
if (err)
- goto err_out_free_buf;
+ goto err_out_unmap;
dev_info(&dev->dev, "Davicom DM%04lx at pci%s, %pM, irq %d\n",
ent->driver_data >> 16,
- pci_name(pdev), dev->dev_addr, dev->irq);
+ pci_name(pdev), dev->dev_addr, pdev->irq);
pci_set_master(pdev);
return 0;
+err_out_unmap:
+ pci_iounmap(pdev, db->ioaddr);
err_out_free_buf:
pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
db->buf_pool_ptr, db->buf_pool_dma_ptr);
@@ -532,7 +535,7 @@ static void __devexit dmfe_remove_one (struct pci_dev *pdev)
if (dev) {
unregister_netdev(dev);
-
+ pci_iounmap(db->pdev, db->ioaddr);
pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
db->desc_pool_dma_ptr);
@@ -555,13 +558,13 @@ static void __devexit dmfe_remove_one (struct pci_dev *pdev)
static int dmfe_open(struct DEVICE *dev)
{
- int ret;
struct dmfe_board_info *db = netdev_priv(dev);
+ const int irq = db->pdev->irq;
+ int ret;
DMFE_DBUG(0, "dmfe_open", 0);
- ret = request_irq(dev->irq, dmfe_interrupt,
- IRQF_SHARED, dev->name, dev);
+ ret = request_irq(irq, dmfe_interrupt, IRQF_SHARED, dev->name, dev);
if (ret)
return ret;
@@ -615,14 +618,14 @@ static int dmfe_open(struct DEVICE *dev)
static void dmfe_init_dm910x(struct DEVICE *dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
- unsigned long ioaddr = db->ioaddr;
+ void __iomem *ioaddr = db->ioaddr;
DMFE_DBUG(0, "dmfe_init_dm910x()", 0);
/* Reset DM910x MAC controller */
- outl(DM910X_RESET, ioaddr + DCR0); /* RESET MAC */
+ dw32(DCR0, DM910X_RESET); /* RESET MAC */
udelay(100);
- outl(db->cr0_data, ioaddr + DCR0);
+ dw32(DCR0, db->cr0_data);
udelay(5);
/* Phy addr : DM910(A)2/DM9132/9801, phy address = 1 */
@@ -633,12 +636,12 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
db->media_mode = dmfe_media_mode;
/* RESET Phyxcer Chip by GPR port bit 7 */
- outl(0x180, ioaddr + DCR12); /* Let bit 7 output port */
+ dw32(DCR12, 0x180); /* Let bit 7 output port */
if (db->chip_id == PCI_DM9009_ID) {
- outl(0x80, ioaddr + DCR12); /* Issue RESET signal */
+ dw32(DCR12, 0x80); /* Issue RESET signal */
mdelay(300); /* Delay 300 ms */
}
- outl(0x0, ioaddr + DCR12); /* Clear RESET signal */
+ dw32(DCR12, 0x0); /* Clear RESET signal */
/* Process Phyxcer Media Mode */
if ( !(db->media_mode & 0x10) ) /* Force 1M mode */
@@ -649,7 +652,7 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
db->op_mode = db->media_mode; /* Force Mode */
/* Initialize Transmit/Receive decriptor and CR3/4 */
- dmfe_descriptor_init(dev, ioaddr);
+ dmfe_descriptor_init(dev);
/* Init CR6 to program DM910x operation */
update_cr6(db->cr6_data, ioaddr);
@@ -662,10 +665,10 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
/* Init CR7, interrupt active bit */
db->cr7_data = CR7_DEFAULT;
- outl(db->cr7_data, ioaddr + DCR7);
+ dw32(DCR7, db->cr7_data);
/* Init CR15, Tx jabber and Rx watchdog timer */
- outl(db->cr15_data, ioaddr + DCR15);
+ dw32(DCR15, db->cr15_data);
/* Enable DM910X Tx/Rx function */
db->cr6_data |= CR6_RXSC | CR6_TXSC | 0x40000;
@@ -682,6 +685,7 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
struct DEVICE *dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
+ void __iomem *ioaddr = db->ioaddr;
struct tx_desc *txptr;
unsigned long flags;
@@ -707,7 +711,7 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
}
/* Disable NIC interrupt */
- outl(0, dev->base_addr + DCR7);
+ dw32(DCR7, 0);
/* transmit this packet */
txptr = db->tx_insert_ptr;
@@ -721,11 +725,11 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
if ( (!db->tx_queue_cnt) && (db->tx_packet_cnt < TX_MAX_SEND_CNT) ) {
txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
db->tx_packet_cnt++; /* Ready to send */
- outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
+ dw32(DCR1, 0x1); /* Issue Tx polling */
dev->trans_start = jiffies; /* saved time stamp */
} else {
db->tx_queue_cnt++; /* queue TX packet */
- outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
+ dw32(DCR1, 0x1); /* Issue Tx polling */
}
/* Tx resource check */
@@ -734,7 +738,7 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
/* Restore CR7 to enable interrupt */
spin_unlock_irqrestore(&db->lock, flags);
- outl(db->cr7_data, dev->base_addr + DCR7);
+ dw32(DCR7, db->cr7_data);
/* free this SKB */
dev_kfree_skb(skb);
@@ -751,7 +755,7 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
static int dmfe_stop(struct DEVICE *dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
- unsigned long ioaddr = dev->base_addr;
+ void __iomem *ioaddr = db->ioaddr;
DMFE_DBUG(0, "dmfe_stop", 0);
@@ -762,12 +766,12 @@ static int dmfe_stop(struct DEVICE *dev)
del_timer_sync(&db->timer);
/* Reset & stop DM910X board */
- outl(DM910X_RESET, ioaddr + DCR0);
+ dw32(DCR0, DM910X_RESET);
udelay(5);
- phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+ phy_write(ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
/* free interrupt */
- free_irq(dev->irq, dev);
+ free_irq(db->pdev->irq, dev);
/* free allocated rx buffer */
dmfe_free_rxbuffer(db);
@@ -794,7 +798,7 @@ static irqreturn_t dmfe_interrupt(int irq, void *dev_id)
{
struct DEVICE *dev = dev_id;
struct dmfe_board_info *db = netdev_priv(dev);
- unsigned long ioaddr = dev->base_addr;
+ void __iomem *ioaddr = db->ioaddr;
unsigned long flags;
DMFE_DBUG(0, "dmfe_interrupt()", 0);
@@ -802,15 +806,15 @@ static irqreturn_t dmfe_interrupt(int irq, void *dev_id)
spin_lock_irqsave(&db->lock, flags);
/* Got DM910X status */
- db->cr5_data = inl(ioaddr + DCR5);
- outl(db->cr5_data, ioaddr + DCR5);
+ db->cr5_data = dr32(DCR5);
+ dw32(DCR5, db->cr5_data);
if ( !(db->cr5_data & 0xc1) ) {
spin_unlock_irqrestore(&db->lock, flags);
return IRQ_HANDLED;
}
/* Disable all interrupt in CR7 to solve the interrupt edge problem */
- outl(0, ioaddr + DCR7);
+ dw32(DCR7, 0);
/* Check system status */
if (db->cr5_data & 0x2000) {
@@ -838,11 +842,11 @@ static irqreturn_t dmfe_interrupt(int irq, void *dev_id)
if (db->dm910x_chk_mode & 0x2) {
db->dm910x_chk_mode = 0x4;
db->cr6_data |= 0x100;
- update_cr6(db->cr6_data, db->ioaddr);
+ update_cr6(db->cr6_data, ioaddr);
}
/* Restore CR7 to enable interrupt mask */
- outl(db->cr7_data, ioaddr + DCR7);
+ dw32(DCR7, db->cr7_data);
spin_unlock_irqrestore(&db->lock, flags);
return IRQ_HANDLED;
@@ -858,11 +862,14 @@ static irqreturn_t dmfe_interrupt(int irq, void *dev_id)
static void poll_dmfe (struct net_device *dev)
{
+ struct dmfe_board_info *db = netdev_priv(dev);
+ const int irq = db->pdev->irq;
+
/* disable_irq here is not very nice, but with the lockless
interrupt handler we have no other choice. */
- disable_irq(dev->irq);
- dmfe_interrupt (dev->irq, dev);
- enable_irq(dev->irq);
+ disable_irq(irq);
+ dmfe_interrupt (irq, dev);
+ enable_irq(irq);
}
#endif
@@ -873,7 +880,7 @@ static void poll_dmfe (struct net_device *dev)
static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
{
struct tx_desc *txptr;
- unsigned long ioaddr = dev->base_addr;
+ void __iomem *ioaddr = db->ioaddr;
u32 tdes0;
txptr = db->tx_remove_ptr;
@@ -897,7 +904,7 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
db->tx_fifo_underrun++;
if ( !(db->cr6_data & CR6_SFT) ) {
db->cr6_data = db->cr6_data | CR6_SFT;
- update_cr6(db->cr6_data, db->ioaddr);
+ update_cr6(db->cr6_data, ioaddr);
}
}
if (tdes0 & 0x0100)
@@ -924,7 +931,7 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
db->tx_packet_cnt++; /* Ready to send */
db->tx_queue_cnt--;
- outl(0x1, ioaddr + DCR1); /* Issue Tx polling */
+ dw32(DCR1, 0x1); /* Issue Tx polling */
dev->trans_start = jiffies; /* saved time stamp */
}
@@ -1087,12 +1094,7 @@ static void dmfe_ethtool_get_drvinfo(struct net_device *dev,
strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
strlcpy(info->version, DRV_VERSION, sizeof(info->version));
- if (np->pdev)
- strlcpy(info->bus_info, pci_name(np->pdev),
- sizeof(info->bus_info));
- else
- sprintf(info->bus_info, "EISA 0x%lx %d",
- dev->base_addr, dev->irq);
+ strlcpy(info->bus_info, pci_name(np->pdev), sizeof(info->bus_info));
}
static int dmfe_ethtool_set_wol(struct net_device *dev,
@@ -1132,10 +1134,11 @@ static const struct ethtool_ops netdev_ethtool_ops = {
static void dmfe_timer(unsigned long data)
{
+ struct net_device *dev = (struct net_device *)data;
+ struct dmfe_board_info *db = netdev_priv(dev);
+ void __iomem *ioaddr = db->ioaddr;
u32 tmp_cr8;
unsigned char tmp_cr12;
- struct DEVICE *dev = (struct DEVICE *) data;
- struct dmfe_board_info *db = netdev_priv(dev);
unsigned long flags;
int link_ok, link_ok_phy;
@@ -1148,11 +1151,10 @@ static void dmfe_timer(unsigned long data)
db->first_in_callback = 1;
if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) {
db->cr6_data &= ~0x40000;
- update_cr6(db->cr6_data, db->ioaddr);
- phy_write(db->ioaddr,
- db->phy_addr, 0, 0x1000, db->chip_id);
+ update_cr6(db->cr6_data, ioaddr);
+ phy_write(ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
db->cr6_data |= 0x40000;
- update_cr6(db->cr6_data, db->ioaddr);
+ update_cr6(db->cr6_data, ioaddr);
db->timer.expires = DMFE_TIMER_WUT + HZ * 2;
add_timer(&db->timer);
spin_unlock_irqrestore(&db->lock, flags);
@@ -1167,7 +1169,7 @@ static void dmfe_timer(unsigned long data)
db->dm910x_chk_mode = 0x4;
/* Dynamic reset DM910X : system error or transmit time-out */
- tmp_cr8 = inl(db->ioaddr + DCR8);
+ tmp_cr8 = dr32(DCR8);
if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) {
db->reset_cr8++;
db->wait_reset = 1;
@@ -1177,7 +1179,7 @@ static void dmfe_timer(unsigned long data)
/* TX polling kick monitor */
if ( db->tx_packet_cnt &&
time_after(jiffies, dev_trans_start(dev) + DMFE_TX_KICK) ) {
- outl(0x1, dev->base_addr + DCR1); /* Tx polling again */
+ dw32(DCR1, 0x1); /* Tx polling again */
/* TX Timeout */
if (time_after(jiffies, dev_trans_start(dev) + DMFE_TX_TIMEOUT) ) {
@@ -1200,9 +1202,9 @@ static void dmfe_timer(unsigned long data)
/* Link status check, Dynamic media type change */
if (db->chip_id == PCI_DM9132_ID)
- tmp_cr12 = inb(db->ioaddr + DCR9 + 3); /* DM9132 */
+ tmp_cr12 = dr8(DCR9 + 3); /* DM9132 */
else
- tmp_cr12 = inb(db->ioaddr + DCR12); /* DM9102/DM9102A */
+ tmp_cr12 = dr8(DCR12); /* DM9102/DM9102A */
if ( ((db->chip_id == PCI_DM9102_ID) &&
(db->chip_revision == 0x30)) ||
@@ -1251,7 +1253,7 @@ static void dmfe_timer(unsigned long data)
/* 10/100M link failed, used 1M Home-Net */
db->cr6_data|=0x00040000; /* bit18=1, MII */
db->cr6_data&=~0x00000200; /* bit9=0, HD mode */
- update_cr6(db->cr6_data, db->ioaddr);
+ update_cr6(db->cr6_data, ioaddr);
}
} else if (!netif_carrier_ok(dev)) {
@@ -1288,17 +1290,18 @@ static void dmfe_timer(unsigned long data)
* Re-initialize DM910X board
*/
-static void dmfe_dynamic_reset(struct DEVICE *dev)
+static void dmfe_dynamic_reset(struct net_device *dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
+ void __iomem *ioaddr = db->ioaddr;
DMFE_DBUG(0, "dmfe_dynamic_reset()", 0);
/* Sopt MAC controller */
db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
- update_cr6(db->cr6_data, dev->base_addr);
- outl(0, dev->base_addr + DCR7); /* Disable Interrupt */
- outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5);
+ update_cr6(db->cr6_data, ioaddr);
+ dw32(DCR7, 0); /* Disable Interrupt */
+ dw32(DCR5, dr32(DCR5));
/* Disable upper layer interface */
netif_stop_queue(dev);
@@ -1364,9 +1367,10 @@ static void dmfe_reuse_skb(struct dmfe_board_info *db, struct sk_buff * skb)
* Using Chain structure, and allocate Tx/Rx buffer
*/
-static void dmfe_descriptor_init(struct net_device *dev, unsigned long ioaddr)
+static void dmfe_descriptor_init(struct net_device *dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
+ void __iomem *ioaddr = db->ioaddr;
struct tx_desc *tmp_tx;
struct rx_desc *tmp_rx;
unsigned char *tmp_buf;
@@ -1379,7 +1383,7 @@ static void dmfe_descriptor_init(struct net_device *dev, unsigned long ioaddr)
/* tx descriptor start pointer */
db->tx_insert_ptr = db->first_tx_desc;
db->tx_remove_ptr = db->first_tx_desc;
- outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */
+ dw32(DCR4, db->first_tx_desc_dma); /* TX DESC address */
/* rx descriptor start pointer */
db->first_rx_desc = (void *)db->first_tx_desc +
@@ -1389,7 +1393,7 @@ static void dmfe_descriptor_init(struct net_device *dev, unsigned long ioaddr)
sizeof(struct tx_desc) * TX_DESC_CNT;
db->rx_insert_ptr = db->first_rx_desc;
db->rx_ready_ptr = db->first_rx_desc;
- outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */
+ dw32(DCR3, db->first_rx_desc_dma); /* RX DESC address */
/* Init Transmit chain */
tmp_buf = db->buf_pool_start;
@@ -1431,14 +1435,14 @@ static void dmfe_descriptor_init(struct net_device *dev, unsigned long ioaddr)
* Firstly stop DM910X , then written value and start
*/
-static void update_cr6(u32 cr6_data, unsigned long ioaddr)
+static void update_cr6(u32 cr6_data, void __iomem *ioaddr)
{
u32 cr6_tmp;
cr6_tmp = cr6_data & ~0x2002; /* stop Tx/Rx */
- outl(cr6_tmp, ioaddr + DCR6);
+ dw32(DCR6, cr6_tmp);
udelay(5);
- outl(cr6_data, ioaddr + DCR6);
+ dw32(DCR6, cr6_data);
udelay(5);
}
@@ -1448,24 +1452,19 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr)
* This setup frame initialize DM910X address filter mode
*/
-static void dm9132_id_table(struct DEVICE *dev)
+static void dm9132_id_table(struct net_device *dev)
{
+ struct dmfe_board_info *db = netdev_priv(dev);
+ void __iomem *ioaddr = db->ioaddr + 0xc0;
+ u16 *addrptr = (u16 *)dev->dev_addr;
struct netdev_hw_addr *ha;
- u16 * addrptr;
- unsigned long ioaddr = dev->base_addr+0xc0; /* ID Table */
- u32 hash_val;
u16 i, hash_table[4];
- DMFE_DBUG(0, "dm9132_id_table()", 0);
-
/* Node address */
- addrptr = (u16 *) dev->dev_addr;
- outw(addrptr[0], ioaddr);
- ioaddr += 4;
- outw(addrptr[1], ioaddr);
- ioaddr += 4;
- outw(addrptr[2], ioaddr);
- ioaddr += 4;
+ for (i = 0; i < 3; i++) {
+ dw16(0, addrptr[i]);
+ ioaddr += 4;
+ }
/* Clear Hash Table */
memset(hash_table, 0, sizeof(hash_table));
@@ -1475,13 +1474,14 @@ static void dm9132_id_table(struct DEVICE *dev)
/* the multicast address in Hash Table : 64 bits */
netdev_for_each_mc_addr(ha, dev) {
- hash_val = cal_CRC((char *) ha->addr, 6, 0) & 0x3f;
+ u32 hash_val = cal_CRC((char *)ha->addr, 6, 0) & 0x3f;
+
hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
}
/* Write the hash table to MAC MD table */
for (i = 0; i < 4; i++, ioaddr += 4)
- outw(hash_table[i], ioaddr);
+ dw16(0, hash_table[i]);
}
@@ -1490,7 +1490,7 @@ static void dm9132_id_table(struct DEVICE *dev)
* This setup frame initialize DM910X address filter mode
*/
-static void send_filter_frame(struct DEVICE *dev)
+static void send_filter_frame(struct net_device *dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
struct netdev_hw_addr *ha;
@@ -1535,12 +1535,14 @@ static void send_filter_frame(struct DEVICE *dev)
/* Resource Check and Send the setup packet */
if (!db->tx_packet_cnt) {
+ void __iomem *ioaddr = db->ioaddr;
+
/* Resource Empty */
db->tx_packet_cnt++;
txptr->tdes0 = cpu_to_le32(0x80000000);
- update_cr6(db->cr6_data | 0x2000, dev->base_addr);
- outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
- update_cr6(db->cr6_data, dev->base_addr);
+ update_cr6(db->cr6_data | 0x2000, ioaddr);
+ dw32(DCR1, 0x1); /* Issue Tx polling */
+ update_cr6(db->cr6_data, ioaddr);
dev->trans_start = jiffies;
} else
db->tx_queue_cnt++; /* Put in TX queue */
@@ -1575,43 +1577,55 @@ static void allocate_rx_buffer(struct net_device *dev)
db->rx_insert_ptr = rxptr;
}
+static void srom_clk_write(void __iomem *ioaddr, u32 data)
+{
+ static const u32 cmd[] = {
+ CR9_SROM_READ | CR9_SRCS,
+ CR9_SROM_READ | CR9_SRCS | CR9_SRCLK,
+ CR9_SROM_READ | CR9_SRCS
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cmd); i++) {
+ dw32(DCR9, data | cmd[i]);
+ udelay(5);
+ }
+}
/*
* Read one word data from the serial ROM
*/
-
-static u16 read_srom_word(long ioaddr, int offset)
+static u16 read_srom_word(void __iomem *ioaddr, int offset)
{
+ u16 srom_data;
int i;
- u16 srom_data = 0;
- long cr9_ioaddr = ioaddr + DCR9;
- outl(CR9_SROM_READ, cr9_ioaddr);
- outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+ dw32(DCR9, CR9_SROM_READ);
+ dw32(DCR9, CR9_SROM_READ | CR9_SRCS);
/* Send the Read Command 110b */
- SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
- SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
- SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
+ srom_clk_write(ioaddr, SROM_DATA_1);
+ srom_clk_write(ioaddr, SROM_DATA_1);
+ srom_clk_write(ioaddr, SROM_DATA_0);
/* Send the offset */
for (i = 5; i >= 0; i--) {
srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
- SROM_CLK_WRITE(srom_data, cr9_ioaddr);
+ srom_clk_write(ioaddr, srom_data);
}
- outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+ dw32(DCR9, CR9_SROM_READ | CR9_SRCS);
for (i = 16; i > 0; i--) {
- outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
+ dw32(DCR9, CR9_SROM_READ | CR9_SRCS | CR9_SRCLK);
udelay(5);
srom_data = (srom_data << 1) |
- ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
- outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+ ((dr32(DCR9) & CR9_CRDOUT) ? 1 : 0);
+ dw32(DCR9, CR9_SROM_READ | CR9_SRCS);
udelay(5);
}
- outl(CR9_SROM_READ, cr9_ioaddr);
+ dw32(DCR9, CR9_SROM_READ);
return srom_data;
}
@@ -1620,13 +1634,14 @@ static u16 read_srom_word(long ioaddr, int offset)
* Auto sense the media mode
*/
-static u8 dmfe_sense_speed(struct dmfe_board_info * db)
+static u8 dmfe_sense_speed(struct dmfe_board_info *db)
{
+ void __iomem *ioaddr = db->ioaddr;
u8 ErrFlag = 0;
u16 phy_mode;
/* CR6 bit18=0, select 10/100M */
- update_cr6( (db->cr6_data & ~0x40000), db->ioaddr);
+ update_cr6(db->cr6_data & ~0x40000, ioaddr);
phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
@@ -1665,11 +1680,12 @@ static u8 dmfe_sense_speed(struct dmfe_board_info * db)
static void dmfe_set_phyxcer(struct dmfe_board_info *db)
{
+ void __iomem *ioaddr = db->ioaddr;
u16 phy_reg;
/* Select 10/100M phyxcer */
db->cr6_data &= ~0x40000;
- update_cr6(db->cr6_data, db->ioaddr);
+ update_cr6(db->cr6_data, ioaddr);
/* DM9009 Chip: Phyxcer reg18 bit12=0 */
if (db->chip_id == PCI_DM9009_ID) {
@@ -1765,18 +1781,15 @@ static void dmfe_process_mode(struct dmfe_board_info *db)
* Write a word to Phy register
*/
-static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
+static void phy_write(void __iomem *ioaddr, u8 phy_addr, u8 offset,
u16 phy_data, u32 chip_id)
{
u16 i;
- unsigned long ioaddr;
if (chip_id == PCI_DM9132_ID) {
- ioaddr = iobase + 0x80 + offset * 4;
- outw(phy_data, ioaddr);
+ dw16(0x80 + offset * 4, phy_data);
} else {
/* DM9102/DM9102A Chip */
- ioaddr = iobase + DCR9;
/* Send 33 synchronization clock to Phy controller */
for (i = 0; i < 35; i++)
@@ -1816,19 +1829,16 @@ static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
* Read a word data from phy register
*/
-static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
+static u16 phy_read(void __iomem *ioaddr, u8 phy_addr, u8 offset, u32 chip_id)
{
int i;
u16 phy_data;
- unsigned long ioaddr;
if (chip_id == PCI_DM9132_ID) {
/* DM9132 Chip */
- ioaddr = iobase + 0x80 + offset * 4;
- phy_data = inw(ioaddr);
+ phy_data = dr16(0x80 + offset * 4);
} else {
/* DM9102/DM9102A Chip */
- ioaddr = iobase + DCR9;
/* Send 33 synchronization clock to Phy controller */
for (i = 0; i < 35; i++)
@@ -1870,13 +1880,13 @@ static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
* Write one bit data to Phy Controller
*/
-static void phy_write_1bit(unsigned long ioaddr, u32 phy_data)
+static void phy_write_1bit(void __iomem *ioaddr, u32 phy_data)
{
- outl(phy_data, ioaddr); /* MII Clock Low */
+ dw32(DCR9, phy_data); /* MII Clock Low */
udelay(1);
- outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */
+ dw32(DCR9, phy_data | MDCLKH); /* MII Clock High */
udelay(1);
- outl(phy_data, ioaddr); /* MII Clock Low */
+ dw32(DCR9, phy_data); /* MII Clock Low */
udelay(1);
}
@@ -1885,14 +1895,14 @@ static void phy_write_1bit(unsigned long ioaddr, u32 phy_data)
* Read one bit phy data from PHY controller
*/
-static u16 phy_read_1bit(unsigned long ioaddr)
+static u16 phy_read_1bit(void __iomem *ioaddr)
{
u16 phy_data;
- outl(0x50000, ioaddr);
+ dw32(DCR9, 0x50000);
udelay(1);
- phy_data = ( inl(ioaddr) >> 19 ) & 0x1;
- outl(0x40000, ioaddr);
+ phy_data = (dr32(DCR9) >> 19) & 0x1;
+ dw32(DCR9, 0x40000);
udelay(1);
return phy_data;
@@ -1978,7 +1988,7 @@ static void dmfe_parse_srom(struct dmfe_board_info * db)
/* Check DM9801 or DM9802 present or not */
db->HPNA_present = 0;
- update_cr6(db->cr6_data|0x40000, db->ioaddr);
+ update_cr6(db->cr6_data | 0x40000, db->ioaddr);
tmp_reg = phy_read(db->ioaddr, db->phy_addr, 3, db->chip_id);
if ( ( tmp_reg & 0xfff0 ) == 0xb900 ) {
/* DM9801 or DM9802 present */
@@ -2095,6 +2105,7 @@ static int dmfe_suspend(struct pci_dev *pci_dev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pci_dev);
struct dmfe_board_info *db = netdev_priv(dev);
+ void __iomem *ioaddr = db->ioaddr;
u32 tmp;
/* Disable upper layer interface */
@@ -2102,11 +2113,11 @@ static int dmfe_suspend(struct pci_dev *pci_dev, pm_message_t state)
/* Disable Tx/Rx */
db->cr6_data &= ~(CR6_RXSC | CR6_TXSC);
- update_cr6(db->cr6_data, dev->base_addr);
+ update_cr6(db->cr6_data, ioaddr);
/* Disable Interrupt */
- outl(0, dev->base_addr + DCR7);
- outl(inl (dev->base_addr + DCR5), dev->base_addr + DCR5);
+ dw32(DCR7, 0);
+ dw32(DCR5, dr32(DCR5));
/* Fre RX buffers */
dmfe_free_rxbuffer(db);
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists