| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1334356600-20950-7-git-send-email-stigge@antcom.de>
Date: Sat, 14 Apr 2012 00:36:38 +0200
From: Roland Stigge <stigge@...com.de>
To: arm@...nel.org, linux-arm-kernel@...ts.infradead.org,
linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
w.sang@...gutronix.de, srinivas.bakki@....com, kevin.wells@....com,
gregkh@...uxfoundation.org, netdev@...r.kernel.org,
rtc-linux@...glegroups.com, a.zummo@...ertech.it,
linux-watchdog@...r.kernel.org, wim@...ana.be, jonsmirl@...il.com
Cc: Roland Stigge <stigge@...com.de>
Subject: [PATCH RESEND v3 7/8] i2c-pnx.c: Remove duplicated i2c.h
The platforms using i2c-pnx.c both defined a duplicated i2c.h (used nowhere
else). This patch removes those and integrates the contents into the driver
itself.
Signed-off-by: Roland Stigge <stigge@...com.de>
Reviewed-by: Arnd Bergmann <arnd@...db.de>
---
Applies to v3.4-rc2
arch/arm/mach-lpc32xx/include/mach/i2c.h | 63 ------------------------------
arch/arm/mach-pnx4008/include/mach/i2c.h | 64 -------------------------------
drivers/i2c/busses/i2c-pnx.c | 49 ++++++++++++++++++++++-
3 files changed, 46 insertions(+), 130 deletions(-)
--- linux-2.6.orig/arch/arm/mach-lpc32xx/include/mach/i2c.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * PNX4008-specific tweaks for I2C IP3204 block
- *
- * Author: Vitaly Wool <vwool@...mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_I2C_H
-#define __ASM_ARCH_I2C_H
-
-enum {
- mstatus_tdi = 0x00000001,
- mstatus_afi = 0x00000002,
- mstatus_nai = 0x00000004,
- mstatus_drmi = 0x00000008,
- mstatus_active = 0x00000020,
- mstatus_scl = 0x00000040,
- mstatus_sda = 0x00000080,
- mstatus_rff = 0x00000100,
- mstatus_rfe = 0x00000200,
- mstatus_tff = 0x00000400,
- mstatus_tfe = 0x00000800,
-};
-
-enum {
- mcntrl_tdie = 0x00000001,
- mcntrl_afie = 0x00000002,
- mcntrl_naie = 0x00000004,
- mcntrl_drmie = 0x00000008,
- mcntrl_daie = 0x00000020,
- mcntrl_rffie = 0x00000040,
- mcntrl_tffie = 0x00000080,
- mcntrl_reset = 0x00000100,
- mcntrl_cdbmode = 0x00000400,
-};
-
-enum {
- rw_bit = 1 << 0,
- start_bit = 1 << 8,
- stop_bit = 1 << 9,
-};
-
-#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
-#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
-#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
-#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
-#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
-#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
-#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
-#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
-#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
-#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
-#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
-#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
-#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
-
-#define I2C_CHIP_NAME "PNX4008-I2C"
-
-#endif /* __ASM_ARCH_I2C_H */
--- linux-2.6.orig/arch/arm/mach-pnx4008/include/mach/i2c.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * PNX4008-specific tweaks for I2C IP3204 block
- *
- * Author: Vitaly Wool <vwool@...mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_I2C_H__
-#define __ASM_ARCH_I2C_H__
-
-enum {
- mstatus_tdi = 0x00000001,
- mstatus_afi = 0x00000002,
- mstatus_nai = 0x00000004,
- mstatus_drmi = 0x00000008,
- mstatus_active = 0x00000020,
- mstatus_scl = 0x00000040,
- mstatus_sda = 0x00000080,
- mstatus_rff = 0x00000100,
- mstatus_rfe = 0x00000200,
- mstatus_tff = 0x00000400,
- mstatus_tfe = 0x00000800,
-};
-
-enum {
- mcntrl_tdie = 0x00000001,
- mcntrl_afie = 0x00000002,
- mcntrl_naie = 0x00000004,
- mcntrl_drmie = 0x00000008,
- mcntrl_daie = 0x00000020,
- mcntrl_rffie = 0x00000040,
- mcntrl_tffie = 0x00000080,
- mcntrl_reset = 0x00000100,
- mcntrl_cdbmode = 0x00000400,
-};
-
-enum {
- rw_bit = 1 << 0,
- start_bit = 1 << 8,
- stop_bit = 1 << 9,
-};
-
-#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
-#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
-#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
-#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
-#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
-#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
-#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
-#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
-#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
-#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
-#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
-#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
-#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
-
-#define HCLK_MHZ 13
-#define I2C_CHIP_NAME "PNX4008-I2C"
-
-#endif /* __ASM_ARCH_I2C_H___ */
--- linux-2.6.orig/drivers/i2c/busses/i2c-pnx.c
+++ linux-2.6/drivers/i2c/busses/i2c-pnx.c
@@ -24,13 +24,56 @@
#include <linux/clk.h>
#include <linux/slab.h>
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-
#define I2C_PNX_TIMEOUT 10 /* msec */
#define I2C_PNX_SPEED_KHZ 100
#define I2C_PNX_REGION_SIZE 0x100
+enum {
+ mstatus_tdi = 0x00000001,
+ mstatus_afi = 0x00000002,
+ mstatus_nai = 0x00000004,
+ mstatus_drmi = 0x00000008,
+ mstatus_active = 0x00000020,
+ mstatus_scl = 0x00000040,
+ mstatus_sda = 0x00000080,
+ mstatus_rff = 0x00000100,
+ mstatus_rfe = 0x00000200,
+ mstatus_tff = 0x00000400,
+ mstatus_tfe = 0x00000800,
+};
+
+enum {
+ mcntrl_tdie = 0x00000001,
+ mcntrl_afie = 0x00000002,
+ mcntrl_naie = 0x00000004,
+ mcntrl_drmie = 0x00000008,
+ mcntrl_daie = 0x00000020,
+ mcntrl_rffie = 0x00000040,
+ mcntrl_tffie = 0x00000080,
+ mcntrl_reset = 0x00000100,
+ mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+ rw_bit = 1 << 0,
+ start_bit = 1 << 8,
+ stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
+#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
+#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
+#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
+#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
+#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
+
static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data)
{
while (timeout > 0 &&
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists