[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1334276102-15866-16-git-send-email-xiong@qca.qualcomm.com>
Date: Fri, 13 Apr 2012 08:14:40 +0800
From: xiong <xiong@....qualcomm.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <qca-linux-team@...lcomm.com>, <nic-devel@...lcomm.com>,
xiong <xiong@....qualcomm.com>
Subject: [PATCH 15/37] atl1c: update right threshold for TSO
atl1c_configure_tx used a wrong value of MAX_TX_OFFLOAD_THRESH(9KB)
for TSO threshold.
the right value should be 7KB
Fast Ethernet controller doesn't support Jumbo frame.
Signed-off-by: xiong <xiong@....qualcomm.com>
Tested-by: Liu David <dwliu@....qualcomm.com>
---
drivers/net/ethernet/atheros/atl1c/atl1c.h | 2 --
drivers/net/ethernet/atheros/atl1c/atl1c_hw.h | 1 +
drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 11 ++++++++---
3 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c.h b/drivers/net/ethernet/atheros/atl1c/atl1c.h
index 6e5ae89..9f4fc41 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c.h
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c.h
@@ -74,8 +74,6 @@
#define AT_RX_BUF_SIZE (ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)
#define MAX_JUMBO_FRAME_SIZE (6*1024)
-#define MAX_TSO_FRAME_SIZE (7*1024)
-#define MAX_TX_OFFLOAD_THRESH (9*1024)
#define AT_MAX_RECEIVE_QUEUE 4
#define AT_DEF_RECEIVE_QUEUE 1
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
index ec68611..b9fa854 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
@@ -515,6 +515,7 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw);
/* Jumbo packet Threshold for task offload */
#define REG_TX_TSO_OFFLOAD_THRESH 0x1594 /* In 8-bytes */
#define TX_TSO_OFFLOAD_THRESH_MASK 0x07FF
+#define MAX_TSO_FRAME_SIZE (7*1024)
#define REG_TXF_WATER_MARK 0x1598 /* In 8-bytes */
#define TXF_WATER_MARK_MASK 0x0FFF
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 141fe67..0b15e1f 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -501,11 +501,16 @@ static int atl1c_set_features(struct net_device *netdev,
static int atl1c_change_mtu(struct net_device *netdev, int new_mtu)
{
struct atl1c_adapter *adapter = netdev_priv(netdev);
+ struct atl1c_hw *hw = &adapter->hw;
int old_mtu = netdev->mtu;
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
- if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
- (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ /* Fast Etherent controller doesn't support Jumbo packet */
+ if (((hw->nic_type == athr_l2c ||
+ hw->nic_type == athr_l2c_b ||
+ hw->nic_type == athr_l2c_b2) && new_mtu > ETH_DATA_LEN) ||
+ max_frame < ETH_ZLEN + ETH_FCS_LEN ||
+ max_frame > MAX_JUMBO_FRAME_SIZE) {
if (netif_msg_link(adapter))
dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
return -EINVAL;
@@ -1050,7 +1055,7 @@ static void atl1c_configure_tx(struct atl1c_adapter *adapter)
u16 tx_offload_thresh;
u32 txq_ctrl_data;
- tx_offload_thresh = MAX_TX_OFFLOAD_THRESH;
+ tx_offload_thresh = MAX_TSO_FRAME_SIZE;
AT_WRITE_REG(hw, REG_TX_TSO_OFFLOAD_THRESH,
(tx_offload_thresh >> 3) & TX_TSO_OFFLOAD_THRESH_MASK);
AT_READ_REGW(hw, REG_DEVICE_CTRL, &dev_ctrl_data);
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists