[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1334276102-15866-13-git-send-email-xiong@qca.qualcomm.com>
Date: Fri, 13 Apr 2012 08:14:37 +0800
From: xiong <xiong@....qualcomm.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <qca-linux-team@...lcomm.com>, <nic-devel@...lcomm.com>,
xiong <xiong@....qualcomm.com>
Subject: [PATCH 12/37] atl1c: restore max-read-request-size in Device Conrol Register
in some platforms, we found the max-read-request-size in Device Control
Register is set to 0 by (BIOS?) during bootup, this will cause the
performance(throughput) very bad.
Restore it to a min-value.
register definition of REG_DEVICE_CTRL is refined as well.
Signed-off-by: xiong <xiong@....qualcomm.com>
Tested-by: Liu David <dwliu@....qualcomm.com>
---
drivers/net/ethernet/atheros/atl1c/atl1c_hw.h | 21 ++++++++++++++++-----
drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 18 +++++++++++++-----
2 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
index a0b56ef..590ad3d 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
@@ -54,11 +54,22 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw);
#define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7
#define DEVICE_CAP_MAX_PAYLOAD_SHIFT 0
-#define REG_DEVICE_CTRL 0x60
-#define DEVICE_CTRL_MAX_PAYLOAD_MASK 0x7
-#define DEVICE_CTRL_MAX_PAYLOAD_SHIFT 5
-#define DEVICE_CTRL_MAX_RREQ_SZ_MASK 0x7
-#define DEVICE_CTRL_MAX_RREQ_SZ_SHIFT 12
+#define REG_DEVICE_CTRL 0x60 /* 16bit */
+#define DEVICE_CTRL_MAX_RREQ_SZ_MASK 7U
+#define DEVICE_CTRL_MAX_RREQ_SZ_SHIFT 12
+#define DEVICE_CTRL_MAXRRS_MIN 2
+#define DEVICE_CTRL_NOSNP_EN BIT(11)
+#define DEVICE_CTRL_AUXPWR_EN BIT(10)
+#define DEVICE_CTRL_PHANTOM_EN BIT(9)
+#define DEVICE_CTRL_EXTAG_EN BIT(8)
+#define DEVICE_CTRL_MAX_PAYLOAD_MASK 7U
+#define DEVICE_CTRL_MAX_PAYLOAD_SHIFT 5
+#define DEVICE_CTRL_RELORD_EN BIT(4)
+#define DEVICE_CTRL_URR_EN BIT(3)
+#define DEVICE_CTRL_FERR_EN BIT(2)
+#define DEVICE_CTRL_NFERR_EN BIT(1)
+#define DEVICE_CTRL_CERR_EN BIT(0)
+
#define REG_LINK_CTRL 0x68
#define LINK_CTRL_L0S_EN 0x01
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 8e737a5..18c91b6 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -1045,7 +1045,7 @@ static void atl1c_configure_des_ring(struct atl1c_adapter *adapter)
static void atl1c_configure_tx(struct atl1c_adapter *adapter)
{
struct atl1c_hw *hw = &adapter->hw;
- u32 dev_ctrl_data;
+ u16 dev_ctrl_data;
u32 max_pay_load;
u16 tx_offload_thresh;
u32 txq_ctrl_data;
@@ -1053,11 +1053,19 @@ static void atl1c_configure_tx(struct atl1c_adapter *adapter)
tx_offload_thresh = MAX_TX_OFFLOAD_THRESH;
AT_WRITE_REG(hw, REG_TX_TSO_OFFLOAD_THRESH,
(tx_offload_thresh >> 3) & TX_TSO_OFFLOAD_THRESH_MASK);
- AT_READ_REG(hw, REG_DEVICE_CTRL, &dev_ctrl_data);
- max_pay_load = (dev_ctrl_data >> DEVICE_CTRL_MAX_RREQ_SZ_SHIFT) &
- DEVICE_CTRL_MAX_RREQ_SZ_MASK;
+ AT_READ_REGW(hw, REG_DEVICE_CTRL, &dev_ctrl_data);
+ max_pay_load = FIELD_GETX(dev_ctrl_data, DEVICE_CTRL_MAX_RREQ_SZ);
hw->dmar_block = min_t(u32, max_pay_load, hw->dmar_block);
-
+ /*
+ * if BIOS had changed the dam-read-max-length to an invalid value,
+ * restore it to default value
+ */
+ if (hw->dmar_block < DEVICE_CTRL_MAXRRS_MIN) {
+ dev_ctrl_data = FIELD_SETX(dev_ctrl_data,
+ DEVICE_CTRL_MAX_RREQ_SZ, DEVICE_CTRL_MAXRRS_MIN);
+ AT_WRITE_REGW(hw, REG_DEVICE_CTRL, dev_ctrl_data);
+ hw->dmar_block = DEVICE_CTRL_MAXRRS_MIN;
+ }
txq_ctrl_data =
hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2 ?
L2CB_TXQ_CFGV : L1C_TXQ_CFGV;
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists