| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1334276102-15866-33-git-send-email-xiong@qca.qualcomm.com>
Date: Fri, 13 Apr 2012 08:14:57 +0800
From: xiong <xiong@....qualcomm.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <qca-linux-team@...lcomm.com>, <nic-devel@...lcomm.com>,
xiong <xiong@....qualcomm.com>
Subject: [PATCH 32/37] atl1c: refine start/enable code for MAC module
merge TXQ/RXQ/MAC start/enable code to one function as they
are started/enabled at the same time, just like stop/disable them
in the function of atl1c_stop_mac.
Signed-off-by: xiong <xiong@....qualcomm.com>
Tested-by: Liu David <dwliu@....qualcomm.com>
---
drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 89 +++++++----------------
1 files changed, 28 insertions(+), 61 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 8c2f28c..db60325 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -53,11 +53,9 @@ MODULE_LICENSE("GPL");
MODULE_VERSION(ATL1C_DRV_VERSION);
static int atl1c_stop_mac(struct atl1c_hw *hw);
-static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw);
-static void atl1c_enable_tx_ctrl(struct atl1c_hw *hw);
static void atl1c_disable_l0s_l1(struct atl1c_hw *hw);
static void atl1c_set_aspm(struct atl1c_hw *hw, u16 link_speed);
-static void atl1c_setup_mac_ctrl(struct atl1c_adapter *adapter);
+static void atl1c_start_mac(struct atl1c_adapter *adapter);
static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter,
int *work_done, int work_to_do);
static int atl1c_up(struct atl1c_adapter *adapter);
@@ -270,9 +268,7 @@ static void atl1c_check_link_status(struct atl1c_adapter *adapter)
adapter->link_speed = speed;
adapter->link_duplex = duplex;
atl1c_set_aspm(hw, speed);
- atl1c_enable_tx_ctrl(hw);
- atl1c_enable_rx_ctrl(hw);
- atl1c_setup_mac_ctrl(adapter);
+ atl1c_start_mac(adapter);
if (netif_msg_link(adapter))
dev_info(&pdev->dev,
"%s: %s NIC Link is Up<%d Mbps %s>\n",
@@ -1130,22 +1126,36 @@ static int atl1c_stop_mac(struct atl1c_hw *hw)
IDLE_STATUS_TXMAC_BUSY | IDLE_STATUS_RXMAC_BUSY);
}
-static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw)
+static void atl1c_start_mac(struct atl1c_adapter *adapter)
{
- u32 data;
+ struct atl1c_hw *hw = &adapter->hw;
+ u32 mac, txq, rxq;
- AT_READ_REG(hw, REG_RXQ_CTRL, &data);
- data |= RXQ_CTRL_EN;
- AT_WRITE_REG(hw, REG_RXQ_CTRL, data);
-}
+ hw->mac_duplex = adapter->link_duplex == FULL_DUPLEX ? true : false;
+ hw->mac_speed = adapter->link_speed == SPEED_1000 ?
+ atl1c_mac_speed_1000 : atl1c_mac_speed_10_100;
-static void atl1c_enable_tx_ctrl(struct atl1c_hw *hw)
-{
- u32 data;
+ AT_READ_REG(hw, REG_TXQ_CTRL, &txq);
+ AT_READ_REG(hw, REG_RXQ_CTRL, &rxq);
+ AT_READ_REG(hw, REG_MAC_CTRL, &mac);
- AT_READ_REG(hw, REG_TXQ_CTRL, &data);
- data |= TXQ_CTRL_EN;
- AT_WRITE_REG(hw, REG_TXQ_CTRL, data);
+ txq |= TXQ_CTRL_EN;
+ rxq |= RXQ_CTRL_EN;
+ mac |= MAC_CTRL_TX_EN | MAC_CTRL_TX_FLOW |
+ MAC_CTRL_RX_EN | MAC_CTRL_RX_FLOW |
+ MAC_CTRL_ADD_CRC | MAC_CTRL_PAD |
+ MAC_CTRL_BC_EN | MAC_CTRL_SINGLE_PAUSE_EN |
+ MAC_CTRL_HASH_ALG_CRC32;
+ if (hw->mac_duplex)
+ mac |= MAC_CTRL_DUPLX;
+ else
+ mac &= ~MAC_CTRL_DUPLX;
+ mac = FIELD_SETX(mac, MAC_CTRL_SPEED, hw->mac_speed);
+ mac = FIELD_SETX(mac, MAC_CTRL_PRMLEN, hw->preamble_len);
+
+ AT_WRITE_REG(hw, REG_TXQ_CTRL, txq);
+ AT_WRITE_REG(hw, REG_RXQ_CTRL, rxq);
+ AT_WRITE_REG(hw, REG_MAC_CTRL, mac);
}
/*
@@ -1294,49 +1304,6 @@ static void atl1c_set_aspm(struct atl1c_hw *hw, u16 link_speed)
return;
}
-static void atl1c_setup_mac_ctrl(struct atl1c_adapter *adapter)
-{
- struct atl1c_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- u32 mac_ctrl_data;
-
- mac_ctrl_data = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN;
- mac_ctrl_data |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
-
- if (adapter->link_duplex == FULL_DUPLEX) {
- hw->mac_duplex = true;
- mac_ctrl_data |= MAC_CTRL_DUPLX;
- }
-
- if (adapter->link_speed == SPEED_1000)
- hw->mac_speed = atl1c_mac_speed_1000;
- else
- hw->mac_speed = atl1c_mac_speed_10_100;
-
- mac_ctrl_data |= (hw->mac_speed & MAC_CTRL_SPEED_MASK) <<
- MAC_CTRL_SPEED_SHIFT;
-
- mac_ctrl_data |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
- mac_ctrl_data |= ((hw->preamble_len & MAC_CTRL_PRMLEN_MASK) <<
- MAC_CTRL_PRMLEN_SHIFT);
-
- __atl1c_vlan_mode(netdev->features, &mac_ctrl_data);
-
- mac_ctrl_data |= MAC_CTRL_BC_EN;
- if (netdev->flags & IFF_PROMISC)
- mac_ctrl_data |= MAC_CTRL_PROMIS_EN;
- if (netdev->flags & IFF_ALLMULTI)
- mac_ctrl_data |= MAC_CTRL_MC_ALL_EN;
-
- mac_ctrl_data |= MAC_CTRL_SINGLE_PAUSE_EN;
- if (hw->nic_type == athr_l1d || hw->nic_type == athr_l2c_b2 ||
- hw->nic_type == athr_l1d_2) {
- mac_ctrl_data |= MAC_CTRL_SPEED_MODE_SW;
- mac_ctrl_data |= MAC_CTRL_HASH_ALG_CRC32;
- }
- AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
-}
-
/*
* atl1c_configure - Configure Transmit&Receive Unit after Reset
* @adapter: board private structure
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists