| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1334394991-5839-5-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Sat, 14 Apr 2012 02:16:29 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Bruce Allan <bruce.w.allan@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 4/6] e1000e: cleanup boolean logic
From: Bruce Allan <bruce.w.allan@...el.com>
Replace occurrences of 'if (<bool expr> == <1|0>)' with
'if ([!]<bool expr>)'
Replace occurrences of '<bool var> = (<non-bool expr>) ? true : false'
with '<bool var> = <non-bool expr>'.
Replace occurrence of '<bool var> = <non-bool expr>' with
'<bool var> = !!<non-bool expr>'
While the latter replacement is not really necessary, it is done here for
consistency and clarity. No functional changes.
Signed-off-by: Bruce Allan <bruce.w.allan@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/e1000e/80003es2lan.c | 4 +--
drivers/net/ethernet/intel/e1000e/82571.c | 9 +++----
drivers/net/ethernet/intel/e1000e/ich8lan.c | 26 +++++++++++-----------
drivers/net/ethernet/intel/e1000e/mac.c | 2 +-
drivers/net/ethernet/intel/e1000e/manage.c | 2 +-
drivers/net/ethernet/intel/e1000e/phy.c | 23 +++++++++----------
6 files changed, 31 insertions(+), 35 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index bac9dda..fbc84d4 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -228,9 +228,7 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_hw *hw)
/* FWSM register */
mac->has_fwsm = true;
/* ARC supported; valid only if manageability features are enabled. */
- mac->arc_subsystem_valid =
- (er32(FWSM) & E1000_FWSM_MODE_MASK)
- ? true : false;
+ mac->arc_subsystem_valid = !!(er32(FWSM) & E1000_FWSM_MODE_MASK);
/* Adaptive IFS not supported */
mac->adaptive_ifs = false;
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index b3fdc69..609c18c 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -295,9 +295,8 @@ static s32 e1000_init_mac_params_82571(struct e1000_hw *hw)
* ARC supported; valid only if manageability features are
* enabled.
*/
- mac->arc_subsystem_valid =
- (er32(FWSM) & E1000_FWSM_MODE_MASK)
- ? true : false;
+ mac->arc_subsystem_valid = !!(er32(FWSM) &
+ E1000_FWSM_MODE_MASK);
break;
case e1000_82574:
case e1000_82583:
@@ -798,7 +797,7 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
/* Check for pending operations. */
for (i = 0; i < E1000_FLASH_UPDATES; i++) {
usleep_range(1000, 2000);
- if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
+ if (!(er32(EECD) & E1000_EECD_FLUPD))
break;
}
@@ -822,7 +821,7 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
for (i = 0; i < E1000_FLASH_UPDATES; i++) {
usleep_range(1000, 2000);
- if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
+ if (!(er32(EECD) & E1000_EECD_FLUPD))
break;
}
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 64c7644..0f158a9 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -2212,7 +2212,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
/* Check if the flash descriptor is valid */
- if (hsfsts.hsf_status.fldesvalid == 0) {
+ if (!hsfsts.hsf_status.fldesvalid) {
e_dbg("Flash descriptor invalid. SW Sequencing must be used.\n");
return -E1000_ERR_NVM;
}
@@ -2232,7 +2232,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
* completed.
*/
- if (hsfsts.hsf_status.flcinprog == 0) {
+ if (!hsfsts.hsf_status.flcinprog) {
/*
* There is no cycle running at present,
* so we can start a cycle.
@@ -2250,7 +2250,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
*/
for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) {
hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcinprog == 0) {
+ if (!hsfsts.hsf_status.flcinprog) {
ret_val = 0;
break;
}
@@ -2292,12 +2292,12 @@ static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout)
/* wait till FDONE bit is set to 1 */
do {
hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcdone == 1)
+ if (hsfsts.hsf_status.flcdone)
break;
udelay(1);
} while (i++ < timeout);
- if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0)
+ if (hsfsts.hsf_status.flcdone && !hsfsts.hsf_status.flcerr)
return 0;
return -E1000_ERR_NVM;
@@ -2408,10 +2408,10 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
* ICH_FLASH_CYCLE_REPEAT_COUNT times.
*/
hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcerr == 1) {
+ if (hsfsts.hsf_status.flcerr) {
/* Repeat for some time before giving up. */
continue;
- } else if (hsfsts.hsf_status.flcdone == 0) {
+ } else if (!hsfsts.hsf_status.flcdone) {
e_dbg("Timeout error - flash cycle did not complete.\n");
break;
}
@@ -2641,7 +2641,7 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- if ((data & 0x40) == 0) {
+ if (!(data & 0x40)) {
data |= 0x40;
ret_val = e1000_write_nvm(hw, 0x19, 1, &data);
if (ret_val)
@@ -2759,10 +2759,10 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
* try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
*/
hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcerr == 1)
+ if (hsfsts.hsf_status.flcerr)
/* Repeat for some time before giving up. */
continue;
- if (hsfsts.hsf_status.flcdone == 0) {
+ if (!hsfsts.hsf_status.flcdone) {
e_dbg("Timeout error - flash cycle did not complete.\n");
break;
}
@@ -2914,10 +2914,10 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
* a few more times else Done
*/
hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcerr == 1)
+ if (hsfsts.hsf_status.flcerr)
/* repeat for some time before giving up */
continue;
- else if (hsfsts.hsf_status.flcdone == 0)
+ else if (!hsfsts.hsf_status.flcdone)
return ret_val;
} while (++count < ICH_FLASH_CYCLE_REPEAT_COUNT);
}
@@ -3916,7 +3916,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
/* If EEPROM is not marked present, init the IGP 3 PHY manually */
if (hw->mac.type <= e1000_ich9lan) {
- if (((er32(EECD) & E1000_EECD_PRES) == 0) &&
+ if (!(er32(EECD) & E1000_EECD_PRES) &&
(hw->phy.type == e1000_phy_igp_3)) {
e1000e_phy_init_script_igp3(hw);
}
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index decad98..d832749 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -681,7 +681,7 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
return ret_val;
}
- if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
+ if (!(nvm_data & NVM_WORD0F_PAUSE_MASK))
hw->fc.requested_mode = e1000_fc_none;
else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == NVM_WORD0F_ASM_DIR)
hw->fc.requested_mode = e1000_fc_tx_pause;
diff --git a/drivers/net/ethernet/intel/e1000e/manage.c b/drivers/net/ethernet/intel/e1000e/manage.c
index 473f8e7..bacc950 100644
--- a/drivers/net/ethernet/intel/e1000e/manage.c
+++ b/drivers/net/ethernet/intel/e1000e/manage.c
@@ -85,7 +85,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
/* Check that the host interface is enabled. */
hicr = er32(HICR);
- if ((hicr & E1000_HICR_EN) == 0) {
+ if (!(hicr & E1000_HICR_EN)) {
e_dbg("E1000_HOST_EN bit disabled.\n");
return -E1000_ERR_HOST_INTERFACE_COMMAND;
}
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 35b4557..bd5ef64 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -718,7 +718,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
* 1 - Enabled
*/
phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
- if (phy->disable_polarity_correction == 1)
+ if (phy->disable_polarity_correction)
phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
/* Enable downshift on BM (disabled by default) */
@@ -1090,7 +1090,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
* If autoneg_advertised is zero, we assume it was not defaulted
* by the calling code so we set to advertise full capability.
*/
- if (phy->autoneg_advertised == 0)
+ if (!phy->autoneg_advertised)
phy->autoneg_advertised = phy->autoneg_mask;
e_dbg("Reconfiguring auto-neg advertisement params\n");
@@ -1596,7 +1596,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, offset, &phy_data);
if (!ret_val)
- phy->speed_downgraded = (phy_data & mask);
+ phy->speed_downgraded = !!(phy_data & mask);
return ret_val;
}
@@ -1925,8 +1925,8 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- phy->polarity_correction = (phy_data &
- M88E1000_PSCR_POLARITY_REVERSAL);
+ phy->polarity_correction = !!(phy_data &
+ M88E1000_PSCR_POLARITY_REVERSAL);
ret_val = e1000_check_polarity_m88(hw);
if (ret_val)
@@ -1936,7 +1936,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX);
+ phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX);
if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
ret_val = e1000_get_cable_length(hw);
@@ -1999,7 +1999,7 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- phy->is_mdix = (data & IGP01E1000_PSSR_MDIX);
+ phy->is_mdix = !!(data & IGP01E1000_PSSR_MDIX);
if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
IGP01E1000_PSSR_SPEED_1000MBPS) {
@@ -2052,8 +2052,7 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
if (ret_val)
return ret_val;
- phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
- ? false : true;
+ phy->polarity_correction = !(data & IFE_PSC_AUTO_POLARITY_DISABLE);
if (phy->polarity_correction) {
ret_val = e1000_check_polarity_ife(hw);
@@ -2070,7 +2069,7 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false;
+ phy->is_mdix = !!(data & IFE_PMC_MDIX_STATUS);
/* The following parameters are undefined for 10/100 operation. */
phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
@@ -2979,7 +2978,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
if ((hw->phy.type == e1000_phy_82578) &&
(hw->phy.revision >= 1) &&
(hw->phy.addr == 2) &&
- ((MAX_PHY_REG_ADDRESS & reg) == 0) && (data & (1 << 11))) {
+ !(MAX_PHY_REG_ADDRESS & reg) && (data & (1 << 11))) {
u16 data2 = 0x7EFF;
ret_val = e1000_access_phy_debug_regs_hv(hw,
(1 << 6) | 0x3,
@@ -3265,7 +3264,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- phy->is_mdix = (data & I82577_PHY_STATUS2_MDIX) ? true : false;
+ phy->is_mdix = !!(data & I82577_PHY_STATUS2_MDIX);
if ((data & I82577_PHY_STATUS2_SPEED_MASK) ==
I82577_PHY_STATUS2_SPEED_1000MBPS) {
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists