netdev - Re: tg3 'No PHY devices' loading issue

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4F8E77F7.3080300@redhat.com>
Date:	Wed, 18 Apr 2012 10:14:47 +0200
From:	Harald Hoyer <harald@...hat.com>
To:	Josh Boyer <jwboyer@...hat.com>
CC:	Matt Carlson <mcarlson@...adcom.com>,
	Michael Chan <mchan@...adcom.com>, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org, Ben Hutchings <ben@...adent.org.uk>
Subject: Re: tg3 'No PHY devices' loading issue

Am 17.04.2012 23:05, schrieb Josh Boyer:
> On Tue, Apr 17, 2012 at 03:39:08PM -0400, Josh Boyer wrote:
>> On Tue, Apr 17, 2012 at 11:50:07AM -0700, Matt Carlson wrote:
>>> On Tue, Apr 17, 2012 at 10:18:57AM -0400, Josh Boyer wrote:
>>>> It has worked on some of the older kernels without the need for the
>>>> manual rmmod/modprobe step, so it seems to be somewhat timing related.
>>>> I'm not sure if there is a module load ordering issue, but that doesn't
>>>> seem to be the case.  I can't explain why a later modprobe would work
>>>> just fine though.
>>>>
>>>> Do you have any thoughts on how to go about debugging/fixing this?  I'd
>>>> be happy to test and provide whatever information you need.
>>>
>>> The 57788 uses the broadcom phylib module.  For some reason, it isn't
>>> available the first module load attempt.  A while ago, code was added to
>>> phylib to request modules from userspace if the particular phy support
>>> code wasn't already loaded.  It looks like this mechanism isn't working
>>> too well the first time through.
>>>
>>> Can you reproduce the problem if you run 'rmmod broadcom' and then
>>> reload tg3?
>>
>> I'll give it a shot, but that sounds like a quite plausible scenario to
>> me.  Oddly, even after the manual modprobe, the broadcom phy module
>> doesn't show an increased use count.  There's also no dependency on
>> 'broadcom' listed for tg3 by modinfo.
> 
> If I rmmod both tg3 and broadcom and then just load tg3 (either via
> insmod or modprobe), it works fine.  It does so because whatever you did
> to make it request the phylib module from userspace also worked because
> the broadcom module is loaded as well.
> 
> So it seems my issue is basically because the initramfs isn't built with
> the broadcom module included.  I'll have to figure out a way to teach
> dracut what to do here, since it doesn't seem to be automatically
> picking it up (Harald CC'd).
> 
> Thanks much for the very quick response from everyone.
> 
> josh

Ok, so we have to include all kernel/drivers/net/phy/*.ko in the initramfs?
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html