| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 20 Apr 2012 22:09:26 +0200 From: Richard Cochran <richardcochran@...il.com> To: <netdev@...r.kernel.org> Cc: David Miller <davem@...emloft.net>, Takahiro Shimizu <tshimizu818@...il.com> Subject: [PATCH v3.4-rc 7/9] pch_gbe: correct receive time stamp filtering From: Takahiro Shimizu <tshimizu818@...il.com> This patch fixes the driver so that multicast PTP event messages can be recognized by the hardware time stamping unit. The station address register must be set according to the desired transport type. [ RC - Rebased Takahiro's changes and wrote a commit message explaining the changes. ] Signed-off-by: Takahiro Shimizu <tshimizu818@...il.com> Signed-off-by: Richard Cochran <richardcochran@...il.com> --- .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 14 +++++++++++++- drivers/ptp/Kconfig | 10 +++++++--- 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 799a85a..53ac2fb 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -111,6 +111,9 @@ const char pch_driver_version[] = DRV_VERSION; /* 0x44 Time Synchronization Channel Event Register Bits */ #define TX_SNAPSHOT_LOCKED (1<<0) #define RX_SNAPSHOT_LOCKED (1<<1) + +#define PTP_L4_MULTICAST_SA "01:00:5e:00:01:81" +#define PTP_L2_MULTICAST_SA "01:1b:19:00:00:00" #endif static unsigned int copybreak __read_mostly = PCH_GBE_COPYBREAK_DEFAULT; @@ -236,6 +239,7 @@ static int hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) struct hwtstamp_config cfg; struct pch_gbe_adapter *adapter = netdev_priv(netdev); struct pci_dev *pdev; + u8 station[20]; if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg))) return -EFAULT; @@ -269,9 +273,17 @@ static int hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) adapter->hwts_rx_en = 1; pch_ch_control_write(pdev, MASTER_MODE | CAP_MODE0); break; - case HWTSTAMP_FILTER_PTP_V2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + adapter->hwts_rx_en = 1; + pch_ch_control_write(pdev, V2_MODE | CAP_MODE2); + strcpy(station, PTP_L4_MULTICAST_SA); + pch_set_station_address(station, pdev); + break; + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: adapter->hwts_rx_en = 1; pch_ch_control_write(pdev, V2_MODE | CAP_MODE2); + strcpy(station, PTP_L2_MULTICAST_SA); + pch_set_station_address(station, pdev); break; default: return -ERANGE; diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig index cd9bc3b..5648dad 100644 --- a/drivers/ptp/Kconfig +++ b/drivers/ptp/Kconfig @@ -78,9 +78,13 @@ config PTP_1588_CLOCK_PCH depends on PCH_GBE help This driver adds support for using the PCH EG20T as a PTP - clock. This clock is only useful if your PTP programs are - getting hardware time stamps on the PTP Ethernet packets - using the SO_TIMESTAMPING API. + clock. The hardware supports time stamping of PTP packets + when using the end-to-end delay (E2E) mechansim. The peer + delay mechansim (P2P) is not supported. + + This clock is only useful if your PTP programs are getting + hardware time stamps on the PTP Ethernet packets using the + SO_TIMESTAMPING API. To compile this driver as a module, choose M here: the module will be called ptp_pch. -- 1.7.2.5 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists