netdev - RE: [PATCH 02/10] atl1c: add PHY link event(up/down) patch

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <157393863283F442885425D2C454285623D5FCD8@nasanexd02a.na.qualcomm.com>
Date:	Sun, 29 Apr 2012 10:07:17 +0000
From:	"Huang, Xiong" <xiong@....qualcomm.com>
To:	Florian Fainelli <florian@...nwrt.org>
CC:	"davem@...emloft.net" <davem@...emloft.net>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	qca-linux-team <qca-linux-team@...lcomm.com>,
	nic-devel <nic-devel@...lcomm.com>
Subject: RE: [PATCH 02/10] atl1c: add PHY link event(up/down) patch

> > +struct atl1c_platform_patch {
> > +	u16 pci_vid;
> > +	u16 pci_did;
> > +	u8  pci_revid;
> > +	u16 subsystem_vid;
> > +	u16 subsystem_did;
> > +	u32 patch_flag;
> > +#define ATL1C_LINK_PATCH	0x1
> > +};
> > +static struct atl1c_platform_patch plats[] = {
> 
> This should be static const.

Thanks. It is.

> 
> > +{0x1969, 0x2060, 0xC1, 0x1019, 0x8152, 0x1}, {0x1969, 0x2060, 0xC1,
> > +0x1019, 0x2060, 0x1}, {0x1969, 0x2060, 0xC1, 0x1019, 0xE000, 0x1},
> > +{0x1969, 0x2062, 0xC0, 0x1019, 0x8152, 0x1}, {0x1969, 0x2062, 0xC0,
> > +0x1019, 0x2062, 0x1}, {0x1969, 0x2062, 0xC0, 0x1458, 0xE000, 0x1},
> > +{0x1969, 0x2062, 0xC1, 0x1019, 0x8152, 0x1}, {0x1969, 0x2062, 0xC1,
> > +0x1019, 0x2062, 0x1}, {0x1969, 0x2062, 0xC1, 0x1458, 0xE000, 0x1},
> > +{0x1969, 0x2062, 0xC1, 0x1565, 0x2802, 0x1}, {0x1969, 0x2062, 0xC1,
> > +0x1565, 0x2801, 0x1}, {0x1969, 0x1073, 0xC0, 0x1019, 0x8151, 0x1},
> > +{0x1969, 0x1073, 0xC0, 0x1019, 0x1073, 0x1}, {0x1969, 0x1073, 0xC0,
> > +0x1458, 0xE000, 0x1}, {0x1969, 0x1083, 0xC0, 0x1458, 0xE000, 0x1},
> > +{0x1969, 0x1083, 0xC0, 0x1019, 0x8151, 0x1}, {0x1969, 0x1083, 0xC0,
> > +0x1019, 0x1083, 0x1}, {0x1969, 0x1083, 0xC0, 0x1462, 0x7680, 0x1},
> > +{0x1969, 0x1083, 0xC0, 0x1565, 0x2803, 0x1}, {0},
> 
> Since patch_flag is always set to 0x1, just remove it, if you find a matching entry,
> apply the patch. Vendor ID is always the same, remove it as well.
> 
Thanks, Florain.
It's reasonable to remove Vendor ID since this driver only support one dedicated VID.
But for patch_flag, I'm afraid it could be used for other bug/issue, though we found 
One link issue (=flag bit 0) till now. Otherwise, I will not use ATL1C_LINK_PATCH in function
atl1c_patch_assign.

> Looking at the supported PCI devices table, this patching table is applicable to all
> Atheros PCI device id and none of the Attansic PCI device id, this suggests that

Atl1c driver only supports Atheros PCI device id, Attansic device id is supported by 
Atl1e & atlx.

> your table should be reversed, and you should only list the devices *not*
> needing the patch, this should make the lookup code smaller.
> 

It's almost impossible, there is over 200+ modules sold out, the issue is related to PCB layout,
The total percentage of issue modules is much lower than the normal.



B.R.
Xiong



--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html