[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20120502234718.GA5432@animalcreek.com>
Date: Wed, 2 May 2012 16:47:18 -0700
From: "Mark A. Greer" <mgreer@...malcreek.com>
To: netdev@...r.kernel.org
Cc: linux-omap@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH] net: davinci_emac: Add pre_open, post_stop platform
callbacks
From: "Mark A. Greer" <mgreer@...malcreek.com>
The davinci EMAC driver has been incorporated into the am35x
family of SoC's which is OMAP-based. The incorporation is
incomplete in that the EMAC cannot unblock the [ARM] core if
its blocked on a 'wfi' instruction. This is an issue with
the cpu_idle code because it has the core execute a 'wfi'
instruction.
To work around this issue, add platform data callbacks which
are called at the beginning of the open routine and at the
end of the stop routine of the davinci_emac driver. The
callbacks allow the platform code to issue disable_hlt() and
enable_hlt() calls appropriately. Calling disable_hlt()
prevents cpu_idle from issuing the 'wfi' instruction.
It is not sufficient to simply call disable_hlt() when
there is an EMAC present because it could be present but
not actually used in which case, we do want the 'wfi' to
be executed.
Signed-off-by: Mark A. Greer <mgreer@...malcreek.com>
---
I know adding platform_data callbacks are frowned upon
and I really don't want to add them but I don't see
any other way to accomplish what needs to be accomplished.
Any suggestions?
Thanks, Mark.
drivers/net/ethernet/ti/davinci_emac.c | 14 ++++++++++++++
include/linux/davinci_emac.h | 2 ++
2 files changed, 16 insertions(+)
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 174a334..141a888 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -344,6 +344,8 @@ struct emac_priv {
/*platform specific members*/
void (*int_enable) (void);
void (*int_disable) (void);
+ void (*pre_open) (struct net_device *ndev);
+ void (*post_stop) (struct net_device *ndev);
};
/* clock frequency for EMAC */
@@ -1534,6 +1536,9 @@ static int emac_dev_open(struct net_device *ndev)
int k = 0;
struct emac_priv *priv = netdev_priv(ndev);
+ if (priv->pre_open)
+ priv->pre_open(ndev);
+
netif_carrier_off(ndev);
for (cnt = 0; cnt < ETH_ALEN; cnt++)
ndev->dev_addr[cnt] = priv->mac_addr[cnt];
@@ -1644,6 +1649,10 @@ rollback:
res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k-1);
m = res->end;
}
+
+ if (priv->post_stop)
+ priv->post_stop(ndev);
+
return -EBUSY;
}
@@ -1686,6 +1695,9 @@ static int emac_dev_stop(struct net_device *ndev)
if (netif_msg_drv(priv))
dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name);
+ if (priv->post_stop)
+ priv->post_stop(ndev);
+
return 0;
}
@@ -1817,6 +1829,8 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev)
priv->version = pdata->version;
priv->int_enable = pdata->interrupt_enable;
priv->int_disable = pdata->interrupt_disable;
+ priv->pre_open = pdata->pre_open;
+ priv->post_stop = pdata->post_stop;
priv->coal_intvl = 0;
priv->bus_freq_mhz = (u32)(emac_bus_frequency / 1000000);
diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h
index 5428885..b61e6de 100644
--- a/include/linux/davinci_emac.h
+++ b/include/linux/davinci_emac.h
@@ -39,6 +39,8 @@ struct emac_platform_data {
bool no_bd_ram;
void (*interrupt_enable) (void);
void (*interrupt_disable) (void);
+ void (*pre_open) (struct net_device *ndev);
+ void (*post_stop) (struct net_device *ndev);
};
enum {
--
1.7.9.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists