netdev - [PATCH 3/3] smsc75xx: let EEPROM determine GPIO/LED settings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1336129033-15826-4-git-send-email-steve.glendinning@shawell.net>
Date:	Fri,  4 May 2012 11:57:13 +0100
From:	Steve Glendinning <steve.glendinning@...well.net>
To:	netdev@...r.kernel.org
Cc:	"David S. Miller" <davem@...emloft.net>,
	Steve Glendinning <steve.glendinning@...well.net>
Subject: [PATCH 3/3] smsc75xx: let EEPROM determine GPIO/LED settings

This patch allows the GPIO/LED settings to be configured by the
EEPROM if present, and only sets the default values (LED outputs
for link/activity) when an EEPROM is not detected.

Signed-off-by: Steve Glendinning <steve.glendinning@...well.net>
---
 drivers/net/usb/smsc75xx.c |   19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 72b62b5..fb1a087 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -903,15 +903,20 @@ static int smsc75xx_reset(struct usbnet *dev)
 
 	netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x", buf);
 
-	/* Configure GPIO pins as LED outputs */
-	ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf);
-	check_warn_return(ret, "Failed to read LED_GPIO_CFG: %d", ret);
+	ret = smsc75xx_read_reg(dev, E2P_CMD, &buf);
+	check_warn_return(ret, "Failed to read E2P_CMD: %d", ret);
 
-	buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL);
-	buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL;
+	/* only set default GPIO/LED settings if no EEPROM is detected */
+	if (!(buf & E2P_CMD_LOADED)) {
+		ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf);
+		check_warn_return(ret, "Failed to read LED_GPIO_CFG: %d", ret);
 
-	ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf);
-	check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d", ret);
+		buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL);
+		buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL;
+
+		ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf);
+		check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d", ret);
+	}
 
 	ret = smsc75xx_write_reg(dev, FLOW, 0);
 	check_warn_return(ret, "Failed to write FLOW: %d", ret);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html