netdev - Re: [V2 PATCH 9/9] vhost: zerocopy: poll vq in zerocopy callback

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 22 May 2012 18:05:43 +0800
From:	Jason Wang <jasowang@...hat.com>
To:	Shirley Ma <mashirle@...ibm.com>
CC:	"Michael S. Tsirkin" <mst@...hat.com>, eric.dumazet@...il.com,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	ebiederm@...ssion.com, davem@...emloft.net
Subject: Re: [V2 PATCH 9/9] vhost: zerocopy: poll vq in zerocopy callback

On 05/21/2012 11:42 PM, Shirley Ma wrote:
> On Mon, 2012-05-21 at 14:05 +0800, Jason Wang wrote:
>>>> - tx polling depends on skb_orphan() which is often called by
>> device
>>>> driver when it place the packet into the queue of the devices
>> instead
>>>> of  when the packets were sent. So it was too early for vhost to be
>>>> notified.
>>> Then do you think it's better to replace with vhost_poll_queue here
>>> instead?
>> Just like what does this patch do - calling vhost_poll_queue() in
>> vhost_zerocopy_callback().
>>>> - it only works when the pending DMAs exceeds VHOST_MAX_PEND, it's
>>>> highly possible that guest needs to be notified when the pending
>>>> packets
>>>> isn't so much.
>>> In which situation the guest needs to be notified when there is no
>> TX
>>> besides buffers run out?
>> Consider guest call virtqueue_enable_cb_delayed() which means it only
>> need to be notified when 3/4 of pending buffers ( about 178 buffers
>> (256-MAX_SKB_FRAGS-2)*3/4 ) were sent by host. So vhost_net would
>> notify
>> guest when about 60 buffers were pending. Since tx polling is only
>> enabled when pending packets exceeds VHOST_MAX_PEND 128, so tx work
>> would not be notified to run and guest would never get the interrupt
>> it
>> expected to re-enable the queue.
> So it seems we still need vhost_enable_notify() in handle_tx when there
> is no tx in zerocopy case.
>
> Do you know which one is more expensive: the cost of vhost_poll_queue()
> in each zerocopy callback or calling vhost_enable_notify()?

Didn't follow here, do you mean vhost_signal() here?
>
> Have you compared the results by removing below code in handle_tx()?
>
> -                       if (unlikely(num_pends>  VHOST_MAX_PEND)) {
> -                                tx_poll_start(net, sock);
> -                                set_bit(SOCK_ASYNC_NOSPACE,&sock->flags);
> -                                break;
> -                        }

I remember I've done some basic test when I send this patch, there's no 
much increasing of cpu utilization. Would double check this again.
>> And just like what we've discussed, tx polling based adding and
>> signaling is too early for vhost.
> Thanks
> Shirley
>

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html