lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	23 May 2012 21:39:30 -0400
From:	"George Spelvin" <linux@...izon.com>
To:	linux@...izon.com, romieu@...zoreil.com
Cc:	davej@...hat.com, kernel-team@...oraproject.org,
	netdev@...r.kernel.org
Subject: Re: NETDEV WATCHDOG: %s (%s): transmit queue %u timed out

> You may try the attached patches on top of current -git. A complete dmesg
> will be welcome. So will an 'ethtool -d eth0' if the device stops working.
>
> You did not label the problem as a serious one. Does it means that the
> driver automatically recovers ?

It does indeed recover fine.  (Of course, there may be lost packets or
memory leaks.) The machine is the main office file server, which also
serves as an outside network firewall, so anything serious would be
noted VERY quickly.

> I'll add some ring and registers debug stuff tomorrow.

The main thing is I don't like to reboot it very often; it's not
a dev machine.  But I can, as long as it's outside normal work hours.

So thank you; I'll give your patch a try.


Here's a complete dmesg for the current boot, which includes the message being
complained about.  If there's some subset that's of interest for future test
reports, tell me and I won't spam the mailing list as much.

Initializing cgroup subsys cpu
Linux version 3.4.0-00017-g3df9c78 ($USER@...ST) (gcc version 4.7.0 (Debian 4.7.0-8) ) #152 SMP Mon May 21 22:46:39 UTC 2012
Command line: auto BOOT_IMAGE=Amd64 ro root=905 libata.fua=1 acpi_enforce_resources=lax k10temp.force=1
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 0000000000093800 (usable)
 BIOS-e820: 0000000000093800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000dffa0000 (usable)
 BIOS-e820: 00000000dffc0000 - 00000000dffce000 (ACPI data)
 BIOS-e820: 00000000dffce000 - 00000000dfff0000 (ACPI NVS)
 BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7376/MS-7376, BIOS V1.7 01/13/2009
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFE0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000220000000 aka 8704M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdffa0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000091000] 91000 size 8192
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000dffa0000
 0000000000 - 00c0000000 page 1G
 00c0000000 - 00dfe00000 page 2M
 00dfe00000 - 00dffa0000 page 4k
kernel direct mapping tables up to dffa0000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000000220000000
 0100000000 - 0200000000 page 1G
 0200000000 - 0220000000 page 2M
kernel direct mapping tables up to 220000000 @ dff9e000-dffa0000
ACPI: RSDP 00000000000f9e30 00014 (v00 ACPIAM)
ACPI: RSDT 00000000dffc0000 00038 (v01 011309 RSDT1044 20090113 MSFT 00000097)
ACPI: FACP 00000000dffc0200 00084 (v02 011309 FACP1044 20090113 MSFT 00000097)
ACPI: DSDT 00000000dffc0440 06E9B (v01  1ADNC 1ADNC001 00000001 INTL 20051117)
ACPI: FACS 00000000dffce000 00040
ACPI: APIC 00000000dffc0390 0006C (v01 011309 APIC1044 20090113 MSFT 00000097)
ACPI: MCFG 00000000dffc0400 0003C (v01 011309 OEMMCFG  20090113 MSFT 00000097)
ACPI: OEMB 00000000dffce040 00071 (v01 011309 OEMB1044 20090113 MSFT 00000097)
ACPI: HPET 00000000dffc72e0 00038 (v01 011309 OEMHPET  20090113 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00220000
Movable zone start PFN for each node
Early memory PFN ranges
    0: 0x00000010 -> 0x00000093
    0: 0x00000100 -> 0x000dffa0
    0: 0x00100000 -> 0x00220000
On node 0 totalpages: 2096931
  DMA zone: 64 pages used for memmap
  DMA zone: 2 pages reserved
  DMA zone: 3905 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 896992 pages, LIFO batch:31
  Normal zone: 18432 pages used for memmap
  Normal zone: 1161216 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at dfffe000 (gap: dfffe000:1ff02000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 23 pages/cpu @ffff88021fc00000 s72704 r0 d21504 u524288
pcpu-alloc: s72704 r0 d21504 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2062113
Kernel command line: auto BOOT_IMAGE=Amd64 ro root=905 libata.fua=1 acpi_enforce_resources=lax k10temp.force=1
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ d4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ d4000000
Memory: 8105120k/8912896k available (4123k kernel code, 525172k absent, 282604k reserved, 1959k data, 476k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:712 16
Console: colour VGA+ 80x50
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: using HPET reference calibration
Detected 2500.119 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.23 BogoMIPS (lpj=25001190)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
using AMD E400 aware idle routine
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20120320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
MCE: In-kernel MCE decoding enabled.
NMI watchdog: enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
NMI watchdog: enabled, takes one hw-pmu counter.
System has AMD C1E enabled
Switch to broadcast mode on CPU1
 #2
NMI watchdog: enabled, takes one hw-pmu counter.
Switch to broadcast mode on CPU2
 #3 Ok.
NMI watchdog: enabled, takes one hw-pmu counter.
Switch to broadcast mode on CPU3
Brought up 4 CPUs
Total of 4 processors activated (20000.95 BogoMIPS).
Switch to broadcast mode on CPU0
xor: automatically using best checksumming function: generic_sse
   generic_sse:  9959.200 MB/sec
xor: using function: generic_sse (9959.200 MB/sec)
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [e0000000, dfffffff] ==> none
TOM2: 0000000220000000 aka 8704M
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io  0x0000-0xffff]
bus: 00 index 1 [mem 0xf0000000-0xffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
bus: 00 index 3 [mem 0x220000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
raid6: int64x1   2430 MB/s
raid6: int64x2   2128 MB/s
raid6: int64x4   2234 MB/s
raid6: int64x8   1473 MB/s
raid6: sse2x1    3432 MB/s
raid6: sse2x2    5661 MB/s
raid6: sse2x4    6710 MB/s
raid6: using algorithm sse2x4 (6710 MB/s)
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Detected MSI hardware, enabling workarounds.
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5956] type 00 class 0x060000
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [1002:597b] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [1002:597e] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:12.0: [1002:4380] type 00 class 0x010601
pci 0000:00:12.0: reg 10: [io  0x7000-0x7007]
pci 0000:00:12.0: reg 14: [io  0x6000-0x6003]
pci 0000:00:12.0: reg 18: [io  0x5000-0x5007]
pci 0000:00:12.0: reg 1c: [io  0x4000-0x4003]
pci 0000:00:12.0: reg 20: [io  0x3000-0x300f]
pci 0000:00:12.0: reg 24: [mem 0xfe5ff800-0xfe5ffbff]
pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfe5fe000-0xfe5fefff]
pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
pci 0000:00:13.1: reg 10: [mem 0xfe5fd000-0xfe5fdfff]
pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
pci 0000:00:13.2: reg 10: [mem 0xfe5fc000-0xfe5fcfff]
pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
pci 0000:00:13.3: reg 10: [mem 0xfe5fb000-0xfe5fbfff]
pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
pci 0000:00:13.4: reg 10: [mem 0xfe5fa000-0xfe5fafff]
pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
pci 0000:00:13.5: reg 10: [mem 0xfe5ff000-0xfe5ff0ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.0: reg 10: [io  0x0b00-0x0b0f]
pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io  0xff00-0xff0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfe5f4000-0xfe5f7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [1002:5b60] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe6f0000-0xfe6fffff 64bit]
pci 0000:01:00.0: reg 20: [io  0x8000-0x80ff]
pci 0000:01:00.0: reg 30: [mem 0xfe6c0000-0xfe6dffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:5b70] type 00 class 0x038000
pci 0000:01:00.1: reg 10: [mem 0xfe6e0000-0xfe6effff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0x8000-0x8fff]
pci 0000:00:02.0:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io  0x9800-0x98ff]
pci 0000:02:00.0: reg 18: [mem 0xfe7ff000-0xfe7fffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xfe7c0000-0xfe7dffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:05.0:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:03:00.0: [105a:3f20] type 00 class 0x010400
pci 0000:03:00.0: reg 10: [io  0xa800-0xa87f]
pci 0000:03:00.0: reg 18: [io  0xa400-0xa4ff]
pci 0000:03:00.0: reg 1c: [mem 0xfe8ff000-0xfe8fffff]
pci 0000:03:00.0: reg 20: [mem 0xfe8c0000-0xfe8dffff]
pci 0000:03:00.0: reg 24: [mem 0xfe8fc000-0xfe8fdfff]
pci 0000:03:00.0: supports D1
pci 0000:00:09.0: PCI bridge to [bus 03-03]
pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:09.0:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:04:00.0: [1106:3044] type 00 class 0x0c0010
pci 0000:04:00.0: reg 10: [mem 0xfe9ff800-0xfe9fffff]
pci 0000:04:00.0: reg 14: [io  0xc800-0xc87f]
pci 0000:04:00.0: supports D2
pci 0000:04:00.0: PME# supported from D2 D3hot D3cold
pci 0000:04:02.0: [1415:9501] type 00 class 0x070006
pci 0000:04:02.0: reg 10: [io  0xc400-0xc41f]
pci 0000:04:02.0: reg 14: [mem 0xfe9fe000-0xfe9fefff]
pci 0000:04:02.0: reg 18: [io  0xc000-0xc01f]
pci 0000:04:02.0: reg 1c: [mem 0xfe9fd000-0xfe9fdfff]
pci 0000:04:02.0: supports D2
pci 0000:04:02.0: PME# supported from D0 D2 D3hot
pci 0000:04:02.1: [1415:9513] type 00 class 0x070101
pci 0000:04:02.1: reg 10: [io  0xb800-0xb807]
pci 0000:04:02.1: reg 14: [io  0xb400-0xb407]
pci 0000:04:02.1: reg 18: [io  0xb000-0xb01f]
pci 0000:04:02.1: reg 1c: [mem 0xfe9fc000-0xfe9fcfff]
pci 0000:04:02.1: supports D2
pci 0000:04:02.1: PME# supported from D0 D2 D3hot
pci 0000:04:03.0: [1011:0024] type 01 class 0x060400
pci 0000:00:14.4: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xb000-0xefff]
pci 0000:00:14.4:   bridge window [mem 0xfe900000-0xfebfffff]
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:05:04.0: [1011:0019] type 00 class 0x020000
pci 0000:05:04.0: reg 10: [io  0xe800-0xe87f]
pci 0000:05:04.0: reg 14: [mem 0xfebffc00-0xfebfffff]
pci 0000:05:04.0: reg 30: [mem 0xfeb80000-0xfebbffff pref]
pci 0000:05:05.0: [1011:0019] type 00 class 0x020000
pci 0000:05:05.0: reg 10: [io  0xe400-0xe47f]
pci 0000:05:05.0: reg 14: [mem 0xfebff800-0xfebffbff]
pci 0000:05:05.0: reg 30: [mem 0xfeb40000-0xfeb7ffff pref]
pci 0000:05:06.0: [1011:0019] type 00 class 0x020000
pci 0000:05:06.0: reg 10: [io  0xe000-0xe07f]
pci 0000:05:06.0: reg 14: [mem 0xfebff400-0xfebff7ff]
pci 0000:05:06.0: reg 30: [mem 0xfeb00000-0xfeb3ffff pref]
pci 0000:05:07.0: [1011:0019] type 00 class 0x020000
pci 0000:05:07.0: reg 10: [io  0xd800-0xd87f]
pci 0000:05:07.0: reg 14: [mem 0xfebff000-0xfebff3ff]
pci 0000:05:07.0: reg 30: [mem 0xfeac0000-0xfeafffff pref]
pci 0000:04:03.0: PCI bridge to [bus 05-05]
pci 0000:04:03.0:   bridge window [io  0xd000-0xefff]
pci 0000:04:03.0:   bridge window [mem 0xfea00000-0xfebfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
 pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@...ux.it>
PTP clock support registered
Advanced Linux Sound Architecture Driver Version 1.0.25.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
reserve RAM buffer: 0000000000093800 - 000000000009ffff 
reserve RAM buffer: 00000000dffa0000 - 00000000dfffffff 
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xe0000000-0xdfffffff window disabled]
pnp 00:00: [mem 0xf0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io  0x0000-0x000f]
pnp 00:01: [io  0x0081-0x0083]
pnp 00:01: [io  0x0087]
pnp 00:01: [io  0x0089-0x008b]
pnp 00:01: [io  0x008f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io  0x0070-0x0071]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io  0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io  0x00f0-0x00ff]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x03f8-0x03ff]
pnp 00:05: [irq 4]
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [io  0x03f0-0x03f5]
pnp 00:06: [io  0x03f7]
pnp 00:06: [irq 6]
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: [mem 0xfed00000-0xfed003ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: [mem 0xfec00000-0xfec00fff]
pnp 00:08: [mem 0xfee00000-0xfee00fff]
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io  0x0010-0x001f]
pnp 00:09: [io  0x0022-0x003f]
pnp 00:09: [io  0x0062-0x0063]
pnp 00:09: [io  0x0065-0x006f]
pnp 00:09: [io  0x0072-0x007f]
pnp 00:09: [io  0x0080]
pnp 00:09: [io  0x0084-0x0086]
pnp 00:09: [io  0x0088]
pnp 00:09: [io  0x008c-0x008e]
pnp 00:09: [io  0x0090-0x009f]
pnp 00:09: [io  0x00a2-0x00bf]
pnp 00:09: [io  0x00b1]
pnp 00:09: [io  0x00e0-0x00ef]
pnp 00:09: [io  0x04d0-0x04d1]
pnp 00:09: [io  0x040b]
pnp 00:09: [io  0x04d6]
pnp 00:09: [io  0x0c00-0x0c01]
pnp 00:09: [io  0x0c14]
pnp 00:09: [io  0x0c50-0x0c51]
pnp 00:09: [io  0x0c52]
pnp 00:09: [io  0x0c6c]
pnp 00:09: [io  0x0c6f]
pnp 00:09: [io  0x0cd0-0x0cd1]
pnp 00:09: [io  0x0cd2-0x0cd3]
pnp 00:09: [io  0x0cd4-0x0cd5]
pnp 00:09: [io  0x0cd6-0x0cd7]
pnp 00:09: [io  0x0cd8-0x0cdf]
pnp 00:09: [io  0x0800-0x089f]
pnp 00:09: [io  0x0b10-0x0b1f]
pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:09: [io  0x0900-0x090f]
pnp 00:09: [io  0x0910-0x091f]
pnp 00:09: [io  0xfe00-0xfefe]
pnp 00:09: [mem 0xffb80000-0xffbfffff]
system 00:09: [io  0x04d0-0x04d1] has been reserved
system 00:09: [io  0x040b] has been reserved
system 00:09: [io  0x04d6] has been reserved
system 00:09: [io  0x0c00-0x0c01] has been reserved
system 00:09: [io  0x0c14] has been reserved
system 00:09: [io  0x0c50-0x0c51] has been reserved
system 00:09: [io  0x0c52] has been reserved
system 00:09: [io  0x0c6c] has been reserved
system 00:09: [io  0x0c6f] has been reserved
system 00:09: [io  0x0cd0-0x0cd1] has been reserved
system 00:09: [io  0x0cd2-0x0cd3] has been reserved
system 00:09: [io  0x0cd4-0x0cd5] has been reserved
system 00:09: [io  0x0cd6-0x0cd7] has been reserved
system 00:09: [io  0x0cd8-0x0cdf] has been reserved
system 00:09: [io  0x0800-0x089f] has been reserved
system 00:09: [io  0x0b10-0x0b1f] has been reserved
system 00:09: [io  0x0900-0x090f] has been reserved
system 00:09: [io  0x0910-0x091f] has been reserved
system 00:09: [io  0xfe00-0xfefe] has been reserved
system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io  0x0060]
pnp 00:0a: [io  0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:0c: [io  0x0600-0x06df]
pnp 00:0c: [io  0x0ae0-0x0aef]
system 00:0c: [io  0x0600-0x06df] has been reserved
system 00:0c: [io  0x0ae0-0x0aef] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xe0000000-0xefffffff]
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x000c0000-0x000cffff]
pnp 00:0e: [mem 0x000e0000-0x000fffff]
pnp 00:0e: [mem 0x00100000-0xdfffffff]
pnp 00:0e: [mem 0xfec00000-0xffffffff]
pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0e: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0e: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0e: disabling [mem 0x00100000-0xdfffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0x8000-0x8fff]
pci 0000:00:02.0:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:05.0:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:09.0: PCI bridge to [bus 03-03]
pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:09.0:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:04:03.0: PCI bridge to [bus 05-05]
pci 0000:04:03.0:   bridge window [io  0xd000-0xefff]
pci 0000:04:03.0:   bridge window [mem 0xfea00000-0xfebfffff]
pci 0000:00:14.4: PCI bridge to [bus 04-05]
pci 0000:00:14.4:   bridge window [io  0xb000-0xefff]
pci 0000:00:14.4:   bridge window [mem 0xfe900000-0xfebfffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0x8000-0x8fff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:01: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:04: resource 0 [io  0xb000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfebfffff]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:05: resource 0 [io  0xd000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfea00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ d4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x00000007)
Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
msgmni has been set to 15959
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: duty_cycle spans bit 4
ACPI: processor limited to max C-state 1
Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS4: detected caps 00000700 should be 00000500
0000:04:02.0: ttyS4 at I/O 0xc400 (irq = 22) is a 16C950/954
ttyS1: detected caps 00000700 should be 00000500
0000:04:02.0: ttyS1 at I/O 0xc408 (irq = 22) is a 16C950/954
ttyS2: detected caps 00000700 should be 00000500
0000:04:02.0: ttyS2 at I/O 0xc410 (irq = 22) is a 16C950/954
ttyS3: detected caps 00000700 should be 00000500
0000:04:02.0: ttyS3 at I/O 0xc418 (irq = 22) is a 16C950/954
lp: driver loaded but no devices found
Linux agpgart interface v0.103
PCI parallel port detected: 1415:9513, I/O at 0xb800(0x0), IRQ 23
parport0: PC-style at 0xb800, irq 23 [PCSPP]
lp0: using parport0 (interrupt-driven).
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: module loaded
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00)
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xff00-0xff07
Probing IDE interface ide0...
Refined TSC clocksource calibration: 2500.175 MHz.
Switching to clocksource tsc
hda: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
cdrom: Uniform CD-ROM driver Revision: 3.20
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: MSI K9A2 Platinum: enabling 64bit DMA
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@...e5ff800 port 0xfe5ff900 irq 22
ata2: SATA max UDMA/133 abar m1024@...e5ff800 port 0xfe5ff980 irq 22
ata3: SATA max UDMA/133 abar m1024@...e5ff800 port 0xfe5ffa00 irq 22
ata4: SATA max UDMA/133 abar m1024@...e5ff800 port 0xfe5ffa80 irq 22
ahci 0000:03:00.0: PDC42819 can only drive SATA devices with this driver
ahci 0000:03:00.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
ahci 0000:03:00.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata5: SATA max UDMA/133 abar m8192@...e8fc000 port 0xfe8fc100 irq 17
ata6: SATA max UDMA/133 abar m8192@...e8fc000 port 0xfe8fc180 irq 17
ata7: SATA max UDMA/133 abar m8192@...e8fc000 port 0xfe8fc200 irq 17
ata8: SATA max UDMA/133 abar m8192@...e8fc000 port 0xfe8fc280 irq 17
Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
tulip0: EEPROM default media type Autosense
tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block
tulip0:  MII transceiver #1 config 3100 status 7869 advertising 01e1
net eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebffc00, 00:80:c8:b9:c1:d5, IRQ 21
tulip1: EEPROM default media type Autosense
tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block
tulip1:  MII transceiver #1 config 3100 status 7869 advertising 01e1
net eth1: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebff800, 00:80:c8:b9:c1:d6, IRQ 22
tulip2: EEPROM default media type Autosense
tulip2: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block
tulip2:  MII transceiver #1 config 3100 status 7849 advertising 01e1
net eth2: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebff400, 00:80:c8:b9:c1:d7, IRQ 23
tulip3: EEPROM default media type Autosense
tulip3: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block
tulip3:  MII transceiver #1 config 3100 status 7869 advertising 01e1
net eth3: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebff000, 00:80:c8:b9:c1:d8, IRQ 20
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 40 for MSI/MSI-X
r8169 0000:02:00.0: eth4: RTL8168b/8111b at 0xffffc90000020000, 00:21:85:16:51:7f, XID 18000000 IRQ 40
r8169 0000:02:00.0: eth4: jumbo features [frames: 4080 bytes, tx checksumming: ko]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe5ff000
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe5fe000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe5fd000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe5fc000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe5fb000
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133
ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-8: ST3750330AS, SD1A, max UDMA/133
ata2.00: ATA-8: ST3750330AS, SD1A, max UDMA/133
ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: ATA-8: ST3750330AS, SD1A, max UDMA/133
ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: ATA-8: ST3750330AS, SD1A, max UDMA/133
ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: ATA-8: ST3750330AS, SD1A, max UDMA/133
ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/133
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata5.00: configured for UDMA/133
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
scsi 0:0:0:0: Direct-Access     ATA      ST3750330AS      SD1A PQ: 0 ANSI: 5
ata3.00: configured for UDMA/133
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access     ATA      ST3750330AS      SD1A PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
scsi 2:0:0:0: Direct-Access     ATA      ST3750330AS      SD1A PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access     ATA      ST3750330AS      SD1A PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
scsi 4:0:0:0: Direct-Access     ATA      ST3750330AS      SD1A PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
scsi 5:0:0:0: Direct-Access     ATA      Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 10
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
 sdf: sdf1
sd 5:0:0:0: [sdf] Attached SCSI disk
 sdd: sdd1 sdd2 sdd3 sdd4
sd 3:0:0:0: [sdd] Attached SCSI disk
 sde: sde1 sde2 sde3 sde4
sd 4:0:0:0: [sde] Attached SCSI disk
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe5fa000
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
 sdc: sdc1 sdc2 sdc3 sdc4
sd 2:0:0:0: [sdc] Attached SCSI disk
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
usbcore: registered new interface driver pl2303
USB Serial support registered for pl2303
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
pps_ldisc: PPS line discipline registered
f71882fg: Found f71882fg chip at 0x600, revision 32
ACPI Warning: 0x0000000000000600-0x0000000000000607 SystemIO conflicts with Region \HMOR 1 (20120320/utaddress-251)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode
f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode
f71882fg f71882fg.1536: Fan: 3 is in duty-cycle mode
f71882fg f71882fg.1536: Fan: 4 is in duty-cycle mode
k10temp 0000:00:18.3: unreliable CPU thermal sensor; check erratum 319
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
GACT probability on
netem: version 1.3
u32 classifier
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
ip_set: protocol 6
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2012-05-21 23:13:48 UTC (1337642028)
powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor (4 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
ALSA device list:
  #0: HDA ATI SB at 0xfe5f4000 irq 16
usb 6-2: new low-speed USB device number 2 using ohci_hcd
input: HID 0430:0100 as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1
generic-usb 0003:0430:0100.0001: input: USB HID v1.00 Mouse [HID 0430:0100] on usb-0000:00:13.4-2/input0
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 20 and added 20 devices.
md: autorun ...
md: considering sdc4 ...
md:  adding sdc4 ...
md: sdc3 has different UUID to sdc4
md: sdc2 has different UUID to sdc4
md: sdc1 has different UUID to sdc4
md:  adding sda4 ...
md: sda3 has different UUID to sdc4
md: sda2 has different UUID to sdc4
md: sda1 has different UUID to sdc4
md:  adding sde4 ...
md: sde3 has different UUID to sdc4
md: sde2 has different UUID to sdc4
md: sde1 has different UUID to sdc4
md:  adding sdd4 ...
md: sdd3 has different UUID to sdc4
md: sdd2 has different UUID to sdc4
md: sdd1 has different UUID to sdc4
md:  adding sdb4 ...
md: sdb3 has different UUID to sdc4
md: sdb2 has different UUID to sdc4
md: sdb1 has different UUID to sdc4
md: created md6
md: bind<sdb4>
md: bind<sdd4>
md: bind<sde4>
md: bind<sda4>
md: bind<sdc4>
md: running: <sdc4><sda4><sde4><sdd4><sdb4>
bio: create slab <bio-1> at 1
md/raid:md6: device sdc4 operational as raid disk 2
md/raid:md6: device sda4 operational as raid disk 0
md/raid:md6: device sde4 operational as raid disk 4
md/raid:md6: device sdd4 operational as raid disk 3
md/raid:md6: device sdb4 operational as raid disk 1
md/raid:md6: allocated 5350kB
md/raid:md6: raid level 5 active with 5 out of 5 devices, algorithm 2
RAID conf printout:
 --- level:5 rd:5 wd:5
 disk 0, o:1, dev:sda4
 disk 1, o:1, dev:sdb4
 disk 2, o:1, dev:sdc4
 disk 3, o:1, dev:sdd4
 disk 4, o:1, dev:sde4
created bitmap (173 pages) for device md6
md6: bitmap initialized from disk: read 11/11 pages, set 1 of 354293 bits
md6: detected capacity change from 0 to 1486011498496
md: considering sdc3 ...
md:  adding sdc3 ...
md: sdc2 has different UUID to sdc3
md: sdc1 has different UUID to sdc3
md: sda3 has different UUID to sdc3
md: sda2 has different UUID to sdc3
md: sda1 has different UUID to sdc3
md: sde3 has different UUID to sdc3
md: sde2 has different UUID to sdc3
md: sde1 has different UUID to sdc3
md:  adding sdd3 ...
md: sdd2 has different UUID to sdc3
md: sdd1 has different UUID to sdc3
md: sdb3 has different UUID to sdc3
md: sdb2 has different UUID to sdc3
md: sdb1 has different UUID to sdc3
md: created md8
md: bind<sdd3>
md: bind<sdc3>
md: running: <sdc3><sdd3>
md/raid1:md8: active with 2 out of 2 mirrors
md8: detected capacity change from 0 to 6144196608
md: considering sdc2 ...
md:  adding sdc2 ...
md: sdc1 has different UUID to sdc2
md: sda3 has different UUID to sdc2
md:  adding sda2 ...
md: sda1 has different UUID to sdc2
md: sde3 has different UUID to sdc2
md:  adding sde2 ...
md: sde1 has different UUID to sdc2
md:  adding sdd2 ...
md: sdd1 has different UUID to sdc2
md: sdb3 has different UUID to sdc2
md:  adding sdb2 ...
md: sdb1 has different UUID to sdc2
md: created md5
md: bind<sdb2>
md: bind<sdd2>
md: bind<sde2>
md: bind<sda2>
md: bind<sdc2>
md: running: <sdc2><sda2><sde2><sdd2><sdb2>
md/raid10:md5: active with 4 out of 4 devices
created bitmap (173 pages) for device md5
md5: bitmap initialized from disk: read 11/11 pages, set 0 of 354293 bits
md5: detected capacity change from 0 to 743005749248
md: considering sdc1 ...
RAID10 conf printout:
 --- wd:4 rd:4
 disk 0, wo:0, o:1, dev:sda2
 disk 1, wo:0, o:1, dev:sdb2
 disk 2, wo:0, o:1, dev:sdc2
 disk 3, wo:0, o:1, dev:sdd2
md:  adding sdc1 ...
md: sda3 has different UUID to sdc1
md:  adding sda1 ...
md: sde3 has different UUID to sdc1
md:  adding sde1 ...
md:  adding sdd1 ...
md: sdb3 has different UUID to sdc1
md:  adding sdb1 ...
md: created md0
md: bind<sdb1>
md: bind<sdd1>
md: bind<sde1>
md: bind<sda1>
md: bind<sdc1>
md: running: <sdc1><sda1><sde1><sdd1><sdb1>
md/raid1:md0: active with 5 out of 5 mirrors
md0: detected capacity change from 0 to 1003356160
md: considering sda3 ...
md:  adding sda3 ...
md:  adding sde3 ...
md:  adding sdb3 ...
md: created md7
md: bind<sdb3>
md: bind<sde3>
md: bind<sda3>
md: running: <sda3><sde3><sdb3>
md/raid1:md7: active with 2 out of 2 mirrors
md7: detected capacity change from 0 to 6144196608
md: ... autorun DONE.
RAID1 conf printout:
 --- wd:2 rd:2
 disk 0, wo:0, o:1, dev:sda3
 disk 1, wo:0, o:1, dev:sdb3
 md5: unknown partition table
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md5): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
Freeing unused kernel memory: 476k freed
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
 md7: unknown partition table
 md8: unknown partition table
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
 md6: unknown partition table
 md0:
udevd[1126]: renamed network interface eth4 to inside
udevd[1202]: renamed network interface eth1 to dmz
udevd[1184]: renamed network interface eth2 to t1
udevd[1125]: renamed network interface eth3 to spare
udevd[1132]: renamed network interface eth0 to cable
hda: UDMA/33 mode selected
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata1: EH complete
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/133
ata2: EH complete
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata1: EH complete
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata3: EH complete
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/133
ata2: EH complete
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata1: EH complete
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata4: EH complete
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata3: EH complete
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/133
ata2: EH complete
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata1: EH complete
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: configured for UDMA/133
ata5: EH complete
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata4: EH complete
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata3: EH complete
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/133
ata2: EH complete
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata6.00: configured for UDMA/133
ata6: EH complete
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata1: EH complete
ata5.00: configured for UDMA/133
ata5: EH complete
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/133
ata2: EH complete
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata4: EH complete
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata3: EH complete
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata6.00: configured for UDMA/133
ata6: EH complete
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/133
ata2: EH complete
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata4: EH complete
ata5.00: configured for UDMA/133
ata5: EH complete
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata6.00: configured for UDMA/133
ata6: EH complete
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata3: EH complete
ata5.00: configured for UDMA/133
ata5: EH complete
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata3: EH complete
ata6.00: configured for UDMA/133
ata6: EH complete
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata4: EH complete
ata5.00: configured for UDMA/133
ata5: EH complete
ata6.00: configured for UDMA/133
ata6: EH complete
ata5.00: configured for UDMA/133
ata5: EH complete
ata6.00: configured for UDMA/133
ata6: EH complete
hda: UDMA/33 mode selected
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata1: EH complete
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/133
ata2: EH complete
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata3: EH complete
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata4: EH complete
ata5.00: configured for UDMA/133
ata5: EH complete
ata6.00: configured for UDMA/133
ata6: EH complete
Adding 6000188k swap on /dev/md7.  Priority:1 extents:1 across:6000188k 
Adding 6000188k swap on /dev/md8.  Priority:1 extents:1 across:6000188k 
scsi_verify_blk_ioctl: 832 callbacks suppressed
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
EXT3-fs (md5): using internal journal
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md6): using internal journal
EXT3-fs (md6): mounted filesystem with writeback data mode
EXT4-fs (sdf1): mounted filesystem with writeback data mode. Opts: data=writeback
r8169 0000:02:00.0: inside: link down
r8169 0000:02:00.0: inside: link down
NOHZ: local_softirq_pending 08
ADDRCONF(NETDEV_UP): inside: link is not ready
r8169 0000:02:00.0: inside: link up
ADDRCONF(NETDEV_CHANGE): inside: link becomes ready
net dmz: Setting full-duplex based on MII#1 link partner capability of 45e1
net cable: Setting full-duplex based on MII#1 link partner capability of 41e1
cable: no IPv6 routers present
dmz: no IPv6 routers present
inside: no IPv6 routers present
postgres (7418): /proc/7418/oom_adj is deprecated, please use /proc/7418/oom_score_adj instead.
pps pps0: new PPS source serial3 at ID 0
pps pps0: source "/dev/ttyS3" added
pps pps1: new PPS source serial4 at ID 1
pps pps1: source "/dev/ttyS4" added
device cable entered promiscuous mode
device dmz entered promiscuous mode
------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0xe9/0x15c()
Hardware name: MS-7376
NETDEV WATCHDOG: inside (r8169): transmit queue 0 timed out
Pid: 0, comm: swapper/3 Not tainted 3.4.0-00017-g3df9c78 #152
Call Trace:
 <IRQ>  [<ffffffff81311aba>] ? dev_watchdog+0xe9/0x15c
 [<ffffffff81024499>] ? warn_slowpath_common+0x71/0x85
 [<ffffffff813119d1>] ? netif_tx_lock+0x7a/0x7a
 [<ffffffff81024511>] ? warn_slowpath_fmt+0x45/0x4a
 [<ffffffff813119be>] ? netif_tx_lock+0x67/0x7a
 [<ffffffff81311aba>] ? dev_watchdog+0xe9/0x15c
 [<ffffffff810345ab>] ? __queue_work+0x20a/0x20a
 [<ffffffff8102c908>] ? run_timer_softirq+0x17e/0x20b
 [<ffffffff81028889>] ? __do_softirq+0x80/0x102
 [<ffffffff81404b8c>] ? call_softirq+0x1c/0x30
 [<ffffffff81003044>] ? do_softirq+0x2c/0x60
 [<ffffffff81028abc>] ? irq_exit+0x3a/0x91
 [<ffffffff81002e91>] ? do_IRQ+0x81/0x97
 [<ffffffff81403327>] ? common_interrupt+0x67/0x67
 <EOI>  [<ffffffff810079d8>] ? default_idle+0x1e/0x32
 [<ffffffff81007afc>] ? amd_e400_idle+0xb7/0xd4
 [<ffffffff810081a5>] ? cpu_idle+0x58/0x98
---[ end trace 7d5a7d21f604b0d8 ]---
r8169 0000:02:00.0: inside: link up
r8169 0000:02:00.0: inside: link up
r8169 0000:02:00.0: inside: link up
r8169 0000:02:00.0: inside: link up
r8169 0000:02:00.0: inside: link up
r8169 0000:02:00.0: inside: link up
r8169 0000:02:00.0: inside: link up
r8169 0000:02:00.0: inside: link up
r8169 0000:02:00.0: inside: link up
r8169 0000:02:00.0: inside: link up
TCP: TCP: Possible SYN flooding on port 25. Sending cookies.  Check SNMP counters.
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md0): using internal journal
EXT3-fs (md0): mounted filesystem with journal data mode
r8169 0000:02:00.0: inside: link up
r8169 0000:02:00.0: inside: link up
UDP: short packet: From yyy.yy.yyy.yy:10995 32496/70 to xx.xxx.xx.xxx:6881
r8169 0000:02:00.0: inside: link up
r8169 0000:02:00.0: inside: link up
r8169 0000:02:00.0: inside: link up
UDP: short packet: From zzz.zzz.zz.zz:29440 21248/181 to xx.xxx.xx.xxx:23552
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists