| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1339669089-27955-2-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Thu, 14 Jun 2012 03:18:04 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Bruce Allan <bruce.w.allan@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 1/6] e1000e: use more informative logging macros when netdev not yet registered
From: Bruce Allan <bruce.w.allan@...el.com>
Based on a report from Ethan Zhao, before calling register_netdev() the
driver should be using logging macros that do not display the potentially
confusing "(unregistered net_device)" yet still display the useful driver
name and PCI bus/device/function.
Reported-by: Ethan Zhao <ethan.kernel@...il.com>
Signed-off-by: Bruce Allan <bruce.w.allan@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 11 ++++---
drivers/net/ethernet/intel/e1000e/param.c | 43 +++++++++++++++++-----------
2 files changed, 34 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 31d37a2..ba86b3f 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6238,7 +6238,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
}
if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
- e_info("PHY reset is blocked due to SOL/IDER session.\n");
+ dev_info(&pdev->dev,
+ "PHY reset is blocked due to SOL/IDER session.\n");
/* Set initial default active device features */
netdev->features = (NETIF_F_SG |
@@ -6288,7 +6289,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
break;
if (i == 2) {
- e_err("The NVM Checksum Is Not Valid\n");
+ dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
err = -EIO;
goto err_eeprom;
}
@@ -6298,13 +6299,15 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* copy the MAC address */
if (e1000e_read_mac_addr(&adapter->hw))
- e_err("NVM Read Error while reading MAC address\n");
+ dev_err(&pdev->dev,
+ "NVM Read Error while reading MAC address\n");
memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->perm_addr)) {
- e_err("Invalid MAC Address: %pM\n", netdev->perm_addr);
+ dev_err(&pdev->dev, "Invalid MAC Address: %pM\n",
+ netdev->perm_addr);
err = -EIO;
goto err_eeprom;
}
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index 55cc156..dfbfa7f 100644
--- a/drivers/net/ethernet/intel/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -199,16 +199,19 @@ static int __devinit e1000_validate_option(unsigned int *value,
case enable_option:
switch (*value) {
case OPTION_ENABLED:
- e_info("%s Enabled\n", opt->name);
+ dev_info(&adapter->pdev->dev, "%s Enabled\n",
+ opt->name);
return 0;
case OPTION_DISABLED:
- e_info("%s Disabled\n", opt->name);
+ dev_info(&adapter->pdev->dev, "%s Disabled\n",
+ opt->name);
return 0;
}
break;
case range_option:
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- e_info("%s set to %i\n", opt->name, *value);
+ dev_info(&adapter->pdev->dev, "%s set to %i\n",
+ opt->name, *value);
return 0;
}
break;
@@ -220,7 +223,8 @@ static int __devinit e1000_validate_option(unsigned int *value,
ent = &opt->arg.l.p[i];
if (*value == ent->i) {
if (ent->str[0] != '\0')
- e_info("%s\n", ent->str);
+ dev_info(&adapter->pdev->dev, "%s\n",
+ ent->str);
return 0;
}
}
@@ -230,8 +234,8 @@ static int __devinit e1000_validate_option(unsigned int *value,
BUG();
}
- e_info("Invalid %s value specified (%i) %s\n", opt->name, *value,
- opt->err);
+ dev_info(&adapter->pdev->dev, "Invalid %s value specified (%i) %s\n",
+ opt->name, *value, opt->err);
*value = opt->def;
return -1;
}
@@ -251,8 +255,10 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
int bd = adapter->bd_number;
if (bd >= E1000_MAX_NIC) {
- e_notice("Warning: no configuration for board #%i\n", bd);
- e_notice("Using defaults for all values\n");
+ dev_notice(&adapter->pdev->dev,
+ "Warning: no configuration for board #%i\n", bd);
+ dev_notice(&adapter->pdev->dev,
+ "Using defaults for all values\n");
}
{ /* Transmit Interrupt Delay */
@@ -366,27 +372,32 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
* default values
*/
if (adapter->itr > 4)
- e_info("%s set to default %d\n", opt.name,
- adapter->itr);
+ dev_info(&adapter->pdev->dev,
+ "%s set to default %d\n", opt.name,
+ adapter->itr);
}
adapter->itr_setting = adapter->itr;
switch (adapter->itr) {
case 0:
- e_info("%s turned off\n", opt.name);
+ dev_info(&adapter->pdev->dev, "%s turned off\n",
+ opt.name);
break;
case 1:
- e_info("%s set to dynamic mode\n", opt.name);
+ dev_info(&adapter->pdev->dev,
+ "%s set to dynamic mode\n", opt.name);
adapter->itr = 20000;
break;
case 3:
- e_info("%s set to dynamic conservative mode\n",
- opt.name);
+ dev_info(&adapter->pdev->dev,
+ "%s set to dynamic conservative mode\n",
+ opt.name);
adapter->itr = 20000;
break;
case 4:
- e_info("%s set to simplified (2000-8000 ints) mode\n",
- opt.name);
+ dev_info(&adapter->pdev->dev,
+ "%s set to simplified (2000-8000 ints) mode\n",
+ opt.name);
break;
default:
/*
--
1.7.10.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists