[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1340804724-29410-2-git-send-email-shawn.guo@linaro.org>
Date: Wed, 27 Jun 2012 21:45:20 +0800
From: Shawn Guo <shawn.guo@...aro.org>
To: "David S. Miller" <davem@...emloft.net>
CC: Lothar Waßmann <LW@...O-electronics.de>,
Florian Fainelli <florian@...nwrt.org>,
<netdev@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<devicetree-discuss@...ts.ozlabs.org>,
Shawn Guo <shawn.guo@...aro.org>
Subject: [PATCH v2 1/5] net: fec: reset phy after pinctrl setup
In case that bootloader or platform initialization does not set up
fec pins, the fec_reset_phy will not be able to succeed, because
fec_reset_phy is currently called before devm_pinctrl_get_select_default.
Move fec_reset_phy call to the place between devm_pinctrl_get_select_default
and fec_enet_init to have above case be taken care.
Signed-off-by: Shawn Guo <shawn.guo@...aro.org>
---
drivers/net/ethernet/freescale/fec.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index ff7f4c5..e868a37 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -1593,8 +1593,6 @@ fec_probe(struct platform_device *pdev)
fep->phy_interface = ret;
}
- fec_reset_phy(pdev);
-
for (i = 0; i < FEC_IRQ_NUM; i++) {
irq = platform_get_irq(pdev, i);
if (irq < 0) {
@@ -1634,6 +1632,8 @@ fec_probe(struct platform_device *pdev)
clk_prepare_enable(fep->clk_ahb);
clk_prepare_enable(fep->clk_ipg);
+ fec_reset_phy(pdev);
+
ret = fec_enet_init(ndev);
if (ret)
goto failed_init;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists