[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1340804724-29410-5-git-send-email-shawn.guo@linaro.org>
Date: Wed, 27 Jun 2012 21:45:23 +0800
From: Shawn Guo <shawn.guo@...aro.org>
To: "David S. Miller" <davem@...emloft.net>
CC: Lothar Waßmann <LW@...O-electronics.de>,
Florian Fainelli <florian@...nwrt.org>,
<netdev@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<devicetree-discuss@...ts.ozlabs.org>,
Shawn Guo <shawn.guo@...aro.org>
Subject: [PATCH v2 4/5] net: fec: phy-reset-gpios is optional
The phy-reset-gpios is an optional property for fec device tree boot.
Change the binding document to match the driver code.
Signed-off-by: Shawn Guo <shawn.guo@...aro.org>
---
Documentation/devicetree/bindings/net/fsl-fec.txt | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index 7ab9e1a..0428920 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -7,10 +7,10 @@ Required properties:
- phy-mode : String, operation mode of the PHY interface.
Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii",
"rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii".
-- phy-reset-gpios : Should specify the gpio for phy reset
Optional properties:
- local-mac-address : 6 bytes, mac address
+- phy-reset-gpios : Should specify the gpio for phy reset
Example:
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists