| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1341597707.2829.23.camel@pro6455b.example.com>
Date: Fri, 06 Jul 2012 14:01:47 -0400
From: Dilip Daya <dilip.daya@...com>
To: "Serge E. Hallyn" <serge@...lyn.com>
Cc: "Eric W. Biederman" <ebiederm@...ssion.com>,
linux-kernel@...r.kernel.org,
containers@...ts.linux-foundation.org, netdev@...r.kernel.org
Subject: Re: Network namespace and bonding WARNING at fs/proc/generic.c
remove_proc_entry
Hi Serge,
On Fri, 2012-07-06 at 17:05 +0000, Serge E. Hallyn wrote:
> Quoting Eric W. Biederman (ebiederm@...ssion.com):
> > "Serge E. Hallyn" <serge@...lyn.com> writes:
> >
> > > Quoting Dilip Daya (dilip.daya@...com):
> > >> Hi,
> > >>
> > >> I'd discussed the following with Serge Hallyn.
> > >>
> > >> => Environment based on 3.2.18 / x86_64 kernel.
> > >> => WARNING: at fs/proc/generic.c:808 remove_proc_entry+0xdb/0x21f()
> > >> => WARNING: at fs/proc/generic.c:849 remove_proc_entry+0x208/0x21f()
> > >
> > > Hi,
> > >
> > > thanks much for sending this. I'm still getting this error on
> > > 3.5.0-2-generic (today's ubuntu quantal kernel)
> > >
> > >> network namespace and bonding
> > >> -----------------------------
> > >>
> > >> * Migrate two phy nics from host to netns (netns0).
> > >> - ip link set ethX netns netns0
> > >>
> > >> * In host environment:
> > >> - load bonding module, /sbin/modprobe -v bonding mode=1 miimon=100
> > >> - /sys/class/net/bond0 exists.
> > >> - /proc/net/bonding/bond0 exists.
> > >> - /sys/class/net/bonding_masters has bond0.
> > >>
> > >> * Migrate bond0 to netns (netns0):
> > >> - ip link set bond0 netns netns0.
> > >>
> > >> * Within netns (netns0):
> > >> - /sys/class/net/bonding_masters is empty.
> > >> - /sys/class/net/bond0 exist.
> > >> - configure bond0 and ifenslave with two phy nics.
> > >> - /proc/net/bonding/bond0 does not exist within netns0, but does
> > >> exist in the host environment.
> > >> - /sys/class/net/bonding_masters is empty.
> > >
> > > mine is not empty, fwiw. However
> > >
> > >> - ping to remote end of bond0 works.
> > >>
> > >> * Within netns (netns0), flushing ethX and bondY:
> > >> - down bond0 and its phy nic interfaces:
> > >> - ip link set ... down
> > >> - ip addr flush dev [bond0 | eth#]
> > >> - deleting bond0, /sbin/ip link del dev bond0
> > >
> > > Yup I still get a remove_proc_entry WARNING at fs/proc/generic.c:808,
> > > which is the warning when (!de)
> >
> > It looks like Dilip is running an old kernel. There should have been
> > some version of /sys/class/net/bonding_masters in every network
> > namespace since sometime in 2009.
> >
> > >From the warning it looks like the proc files are being added/removed
> > to the wrong network namespace. So in one namespace we get an error
> > when we delete the moved device and in the other network namespace
> > we get an error when we remove the /proc/directory.
> >
> > An old kernel without proper network namespace support is the only
> > reason I can imagine someone would be moving an existing bond device
> > between network namespaces.
> >
> > If there are other reasons for wanting to move a bonding device between
> > network namespaces it is possible to catch the NETDEV_UNREGISTER and
> > NETDEV_REGISTER events to remove/add the per device proc files at the
> > appropriate time.
> >
> > However since moving bonding devices appears to be an unneded operation
> > let's just do things simply and forbid moving bonding devices between
> > network namespaces. Serge, Dilip can you two test the patch below
> > and see if it fixes the warnings.
> >
> > Eric
> >
> >
> > diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
> > index 2ee8cf9..818ed64 100644
> > --- a/drivers/net/bonding/bond_main.c
> > +++ b/drivers/net/bonding/bond_main.c
> > @@ -4345,6 +4345,9 @@ static void bond_setup(struct net_device *bond_dev)
> > bond_dev->priv_flags |= IFF_BONDING;
> > bond_dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
> >
> > + /* Don't allow bond devices to change network namespaces. */
> > + bond_dev->features |= NETIF_F_LOCAL;
>
> I believe this needs to be NETIF_F_NETNS_LOCAL. Test build still going with
> that change.
Correct, I made that change and rebuilt bonding driver:
# modinfo bonding | head
filename: /lib/modules/3.2.18-clim-3-amd64/kernel/drivers/net/bonding/bonding.ko
alias: rtnl-link-bond
author: Thomas Davis, tadavis@....gov and many others
description: Ethernet Channel Bonding Driver, v3.7.1-netns
version: 3.7.1-netns
...
My results with the above bonding driver:
(1) Migrating bond0 from host to netns:
# ip link set bond0 netns netns0
RTNETLINK answers: Invalid argument
=> cannot migrate bond0 from host to netns.
=> No warnings.
(2) Loading bonding module in host environment and unloading bonding
module from within netns:
# modprobe -v -r bonding
#
rmmod /lib/modules/3.2.18-clim-3-amd64/kernel/drivers/net/bonding/bonding.ko
# lsmod | grep bond
<<< bonding module does not exist >>>
# ll /sys/class/net/
total 0
lrwxrwxrwx 1 root root 0 Jul 6 11:00 lo
-> ../../devices/virtual/net/lo/
lrwxrwxrwx 1 root root 0 Jul 6 11:00 eth7
-> ../../devices/pci0000:00/0000:00:05.0/0000:14:00.1/net/eth7/
lrwxrwxrwx 1 root root 0 Jul 6 11:00 eth6
-> ../../devices/pci0000:00/0000:00:05.0/0000:14:00.0/net/eth6/
=> No warnings.
-DilipD.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists