| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4FFBDC50.5090800@oracle.com>
Date: Tue, 10 Jul 2012 15:40:00 +0800
From: Joe Jin <joe.jin@...cle.com>
To: Joe Jin <joe.jin@...cle.com>
CC: e1000-devel@...ts.sf.net,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: 82571EB: Detected Hardware Unit Hang
When I debug the driver I found before Detected HW hang, driver unable to clean
and reclaim the resources:
1457 while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && <== at here upper.data always is 0x300
1458 (count < tx_ring->count)) {
<--- snip --->
1487 }
I checked all driver codes I did not found anywhere will set the upper.data with
E1000_TXD_STAT_DD, I guess upper.data be set by hardware?
If OS is 32bit system, what which happen?
Thanks in advance,
Joe
On 07/09/12 16:51, Joe Jin wrote:
> Hi list,
>
> I'm seeing a Unit Hang even with the latest e1000e driver 2.0.0 when doing
> scp test. this issue is easy do reproduced on SUN FIRE X2270 M2, just copy
> a big file (>500M) from another server will hit it at once.
>
> Would you please help on this?
>
> device info:
> # lspci -s 05:00.0
> 05:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) (rev 06)
>
> # lspci -s 05:00.0 -n
> 05:00.0 0200: 8086:10bc (rev 06)
>
> # ethtool -i eth0
> driver: e1000e
> version: 2.0.0-NAPI
> firmware-version: 5.10-2
> bus-info: 0000:05:00.0
>
> # ethtool -k eth0
> Offload parameters for eth0:
> rx-checksumming: on
> tx-checksumming: on
> scatter-gather: on
> tcp segmentation offload: on
> udp fragmentation offload: off
> generic segmentation offload: on
> generic-receive-offload: on
>
> kernel log:
> -----------
> e1000e 0000:05:00.0: eth0: Detected Hardware Unit Hang:
> TDH <6c>
> TDT <81>
> next_to_use <81>
> next_to_clean <6b>
> buffer_info[next_to_clean]:
> time_stamp <fffc7a23>
> next_to_watch <71>
> jiffies <fffc8c0c>
> next_to_watch.status <0>
> MAC Status <80387>
> PHY Status <792d>
> PHY 1000BASE-T Status <3c00>
> PHY Extended Status <3000>
> PCI Status <10>
> e1000e 0000:05:00.0: eth0: Detected Hardware Unit Hang:
> TDH <6c>
> TDT <81>
> next_to_use <81>
> next_to_clean <6b>
> buffer_info[next_to_clean]:
> time_stamp <fffc7a23>
> next_to_watch <71>
> jiffies <fffc9bac>
> next_to_watch.status <0>
> MAC Status <80387>
> PHY Status <792d>
> PHY 1000BASE-T Status <3c00>
> PHY Extended Status <3000>
> PCI Status <10>
> ------------[ cut here ]------------
> WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x225/0x230()
> Hardware name: SUN FIRE X2270 M2
> NETDEV WATCHDOG: eth0 (e1000e): transmit queue 0 timed out
> Modules linked in: autofs4 hidp rfcomm bluetooth rfkill lockd sunrpc cpufreq_ondemand acpi_cpufreq mperf be2iscsi iscsi_boot_sysfs ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi video sbs sbshc acpi_pad acpi_ipmi ipmi_msghandler parport_pc lp parport e1000e(U) snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device igb snd_pcm_oss serio_raw snd_mixer_oss snd_pcm tpm_infineon snd_timer snd soundcore snd_page_alloc i2c_i801 iTCO_wdt i2c_core pcspkr i7core_edac iTCO_vendor_support ioatdma ghes dca edac_core hed dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod usb_storage sd_mod crc_t10dif sg ahci libahci ext3 jbd mbcache [last unloaded: microcode]
> Pid: 0, comm: swapper Not tainted 2.6.39-200.24.1.el5uek #1
> Call Trace:
> [<c07d9ac5>] ? dev_watchdog+0x225/0x230
> [<c045ba61>] warn_slowpath_common+0x81/0xa0
> [<c07d9ac5>] ? dev_watchdog+0x225/0x230
> [<c045bb23>] warn_slowpath_fmt+0x33/0x40
> [<c07d9ac5>] dev_watchdog+0x225/0x230
> [<c07d98a0>] ? dev_activate+0xb0/0xb0
> [<c0468e82>] call_timer_fn+0x32/0xf0
> [<c04bceb0>] ? rcu_check_callbacks+0x80/0x80
> [<c046a76d>] run_timer_softirq+0xed/0x1b0
> [<c07d98a0>] ? dev_activate+0xb0/0xb0
> [<c0461a81>] __do_softirq+0x91/0x1a0
> [<c04619f0>] ? local_bh_enable+0x80/0x80
> <IRQ> [<c0462295>] ? irq_exit+0x95/0xa0
> [<c087f8b8>] ? smp_apic_timer_interrupt+0x38/0x42
> [<c08784f5>] ? apic_timer_interrupt+0x31/0x38
> [<c046007b>] ? do_exit+0x11b/0x370
> [<c065eae4>] ? intel_idle+0xa4/0x100
> [<c078d9b9>] ? cpuidle_idle_call+0xb9/0x1e0
> [<c0411d77>] ? cpu_idle+0x97/0xd0
> [<c085cbbd>] ? rest_init+0x5d/0x70
> [<c0b07a7a>] ? start_kernel+0x28a/0x340
> [<c0b074b0>] ? obsolete_checksetup+0xb0/0xb0
> [<c0b070a4>] ? i386_start_kernel+0x64/0xb0
> ---[ end trace 5502b55cd4d4e5cb ]---
> e1000e 0000:05:00.0: eth0: Reset adapter
> e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>
> Thanks,
> Joe
>
--
Oracle <http://www.oracle.com>
Joe Jin | Software Development Senior Manager | +8610.6106.5624
ORACLE | Linux and Virtualization
No. 24 Zhongguancun Software Park, Haidian District | 100193 Beijing
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists