| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1343749529-17571-7-git-send-email-ian.molton@codethink.co.uk>
Date: Tue, 31 Jul 2012 16:45:29 +0100
From: Ian Molton <ian.molton@...ethink.co.uk>
To: linux-arm-kernel@...ts.infradead.org
Cc: andrew@...n.ch, thomas.petazzoni@...e-electrons.com,
ben.dooks@...ethink.co.uk, arnd@...db.de, netdev@...r.kernel.org
Subject: [PATCH v2 6/6] DT: Convert all kirkwood boards with mv643xx that use DT
This patch converts all present DT capable kirkwood board configurations
to use DT to configure the mv643xx ethernet controller.
Signed-off-by: Ian Molton <ian.molton@...ethink.co.uk>
---
arch/arm/boot/dts/kirkwood-dnskw.dtsi | 9 +++++++++
arch/arm/boot/dts/kirkwood-dreamplug.dts | 18 ++++++++++++++++++
arch/arm/boot/dts/kirkwood-goflexnet.dts | 8 ++++++++
arch/arm/boot/dts/kirkwood-ib62x0.dts | 10 ++++++++++
arch/arm/boot/dts/kirkwood-iconnect.dts | 10 ++++++++++
arch/arm/boot/dts/kirkwood-lsxl.dtsi | 17 +++++++++++++++++
arch/arm/boot/dts/kirkwood-ts219-6281.dts | 8 +++++++-
arch/arm/boot/dts/kirkwood-ts219-6282.dts | 8 +++++++-
arch/arm/boot/dts/kirkwood-ts219.dtsi | 3 +++
arch/arm/mach-kirkwood/board-dnskw.c | 7 +------
arch/arm/mach-kirkwood/board-dreamplug.c | 13 ++-----------
arch/arm/mach-kirkwood/board-goflexnet.c | 7 +------
arch/arm/mach-kirkwood/board-ib62x0.c | 7 +------
arch/arm/mach-kirkwood/board-iconnect.c | 7 +------
arch/arm/mach-kirkwood/board-lsxl.c | 13 ++-----------
arch/arm/mach-kirkwood/board-ts219.c | 10 +---------
16 files changed, 98 insertions(+), 57 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 7408655..214fe0b 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -65,5 +65,14 @@
reg = <0x7b00000 0x500000>;
};
};
+
+ smi0: mdio@...00 {
+ status = "ok";
+ };
+
+ egiga0 {
+ phy_addr = <8>;
+ status = "ok";
+ };
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 26e281f..c27ed1c 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -53,6 +53,24 @@
status = "okay";
nr-ports = <1>;
};
+
+ smi0: mdio@...00 {
+ status = "ok";
+ };
+
+ smi1: mdio@...00 {
+ status = "ok";
+ };
+
+ egiga0 {
+ phy_addr = <0>;
+ status = "ok";
+ };
+
+ egiga1 {
+ phy_addr = <1>;
+ status = "ok";
+ };
};
gpio-leds {
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index 7c8238f..f03dbd0 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -50,6 +50,14 @@
nr-ports = <2>;
};
+ smi0: mdio@...00 {
+ status = "ok";
+ };
+
+ egiga0 {
+ phy_addr = <0>;
+ status = "ok";
+ };
};
gpio-leds {
compatible = "gpio-leds";
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index 66794ed..8c462a1 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -45,6 +45,16 @@
};
};
+
+ smi0: mdio@...00 {
+ status = "ok";
+ };
+
+ egiga0 {
+ phy_addr = <8>;
+ status = "ok";
+ };
+
};
gpio_keys {
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 52d9470..9fc82be 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -30,6 +30,16 @@
clock-frequency = <200000000>;
status = "ok";
};
+
+ smi0: mdio@...00 {
+ status = "ok";
+ };
+
+ egiga0 {
+ phy_addr = <b>;
+ status = "ok";
+ };
+
};
gpio-leds {
compatible = "gpio-leds";
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 8ac51c0..2f47661 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -40,6 +40,23 @@
};
};
};
+ smi0: mdio@...00 {
+ status = "ok";
+ };
+
+ smi1: mdio@...00 {
+ status = "ok";
+ };
+
+ egiga0 {
+ phy_addr = <0>;
+ status = "ok";
+ };
+
+ egiga1 {
+ phy_addr = <8>;
+ status = "ok";
+ };
};
gpio_keys {
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
index ccbf327..4ca49b5 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -3,6 +3,12 @@
/include/ "kirkwood-ts219.dtsi"
/ {
+ ocp@...00000 {
+ egiga0 {
+ phy_addr = <8>;
+ status = "ok";
+ };
+ };
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
@@ -18,4 +24,4 @@
gpios = <&gpio0 16 1>;
};
};
-};
\ No newline at end of file
+};
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index fbe9932..40f3c61 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -3,6 +3,12 @@
/include/ "kirkwood-ts219.dtsi"
/ {
+ ocp@...00000 {
+ egiga0 {
+ phy_addr = <0>;
+ status = "ok";
+ };
+ };
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
@@ -18,4 +24,4 @@
gpios = <&gpio1 5 1>;
};
};
-};
\ No newline at end of file
+};
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 64ea27c..06caf41 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -74,5 +74,8 @@
status = "okay";
nr-ports = <2>;
};
+ smi0: mdio@...00 {
+ status = "ok";
+ };
};
};
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index 4ab3506..4d8216b 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
#include <linux/of.h>
#include <linux/gpio.h>
#include <linux/input.h>
@@ -29,10 +28,6 @@
#include "common.h"
#include "mpp.h"
-static struct mv643xx_eth_platform_data dnskw_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
static unsigned int dnskw_mpp_config[] __initdata = {
MPP13_UART1_TXD, /* Custom ... */
MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */
@@ -112,7 +107,7 @@ void __init dnskw_init(void)
kirkwood_mpp_conf(dnskw_mpp_config);
kirkwood_ehci_init();
- kirkwood_ge00_init(&dnskw_ge00_data);
+ kirkwood_ge00_init(NULL);
platform_device_register(&dnskw_fan_device);
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index aeb234d..b97a112 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
@@ -34,14 +33,6 @@
#include "common.h"
#include "mpp.h"
-static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(1),
-};
-
static struct mvsdio_platform_data dreamplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
};
@@ -65,7 +56,7 @@ void __init dreamplug_init(void)
kirkwood_mpp_conf(dreamplug_mpp_config);
kirkwood_ehci_init();
- kirkwood_ge00_init(&dreamplug_ge00_data);
- kirkwood_ge01_init(&dreamplug_ge01_data);
+ kirkwood_ge00_init(NULL);
+ kirkwood_ge01_init(NULL);
kirkwood_sdio_init(&dreamplug_mvsdio_data);
}
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
index 413e2c8..be7437d 100644
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -20,7 +20,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
@@ -36,10 +35,6 @@
#include "common.h"
#include "mpp.h"
-static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
static unsigned int goflexnet_mpp_config[] __initdata = {
MPP29_GPIO, /* USB Power Enable */
MPP47_GPIO, /* LED Orange */
@@ -67,5 +62,5 @@ void __init goflexnet_init(void)
pr_err("can't setup GPIO 29 (USB Power Enable)\n");
kirkwood_ehci_init();
- kirkwood_ge00_init(&goflexnet_ge00_data);
+ kirkwood_ge00_init(NULL);
}
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index cfc47f8..0a29183 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -16,7 +16,6 @@
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <asm/mach-types.h>
@@ -27,10 +26,6 @@
#define IB62X0_GPIO_POWER_OFF 24
-static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
static unsigned int ib62x0_mpp_config[] __initdata = {
MPP0_NF_IO2,
MPP1_NF_IO3,
@@ -62,7 +57,7 @@ void __init ib62x0_init(void)
kirkwood_mpp_conf(ib62x0_mpp_config);
kirkwood_ehci_init();
- kirkwood_ge00_init(&ib62x0_ge00_data);
+ kirkwood_ge00_init(NULL);
if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
pm_power_off = ib62x0_power_off;
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index d7a9198..220f0d4 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -17,7 +17,6 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
@@ -26,10 +25,6 @@
#include "common.h"
#include "mpp.h"
-static struct mv643xx_eth_platform_data iconnect_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(11),
-};
-
static unsigned int iconnect_mpp_config[] __initdata = {
MPP12_GPIO,
MPP35_GPIO,
@@ -92,7 +87,7 @@ void __init iconnect_init(void)
kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
kirkwood_ehci_init();
- kirkwood_ge00_init(&iconnect_ge00_data);
+ kirkwood_ge00_init(NULL);
platform_device_register(&iconnect_button_device);
}
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
index 83d8975..60331d1 100644
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -18,7 +18,6 @@
#include <linux/ata_platform.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
-#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/gpio-fan.h>
#include <linux/input.h>
@@ -28,14 +27,6 @@
#include "common.h"
#include "mpp.h"
-static struct mv643xx_eth_platform_data lsxl_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data lsxl_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
static unsigned int lsxl_mpp_config[] __initdata = {
MPP10_GPO, /* HDD Power Enable */
MPP11_GPIO, /* USB Vbus Enable */
@@ -126,8 +117,8 @@ void __init lsxl_init(void)
gpio_set_value(LSXL_GPIO_HDD_POWER, 1);
kirkwood_ehci_init();
- kirkwood_ge00_init(&lsxl_ge00_data);
- kirkwood_ge01_init(&lsxl_ge01_data);
+ kirkwood_ge00_init(NULL);
+ kirkwood_ge01_init(NULL);
platform_device_register(&lsxl_fan_device);
/* register power-off method */
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index 1750e68..7e7fe6c 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -18,7 +18,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
@@ -29,10 +28,6 @@
#include "mpp.h"
#include "tsx1x-common.h"
-static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
static unsigned int qnap_ts219_mpp_config[] __initdata = {
MPP0_SPI_SCn,
MPP1_SPI_MOSI,
@@ -62,10 +57,7 @@ void __init qnap_dt_ts219_init(void)
kirkwood_mpp_conf(qnap_ts219_mpp_config);
kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6282_DEV_ID)
- qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-
- kirkwood_ge00_init(&qnap_ts219_ge00_data);
+ kirkwood_ge00_init(NULL);
kirkwood_ehci_init();
pm_power_off = qnap_tsx1x_power_off;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists