| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1345157318-23731-6-git-send-email-peter.p.waskiewicz.jr@intel.com>
Date: Thu, 16 Aug 2012 15:48:34 -0700
From: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@...el.com>
To: davem@...emloft.net
Cc: Alexander Duyck <alexander.h.duyck@...el.com>,
netdev@...r.kernel.org, gospo@...hat.com, sassmann@...hat.com,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@...el.com>
Subject: [net-next 5/9] ixgbe: Make pull tail function separate from rest of cleanup_headers
From: Alexander Duyck <alexander.h.duyck@...el.com>
This change creates a separate function for functionality similar to
pskb_pull_tail. The main motivation for moving it to a separate function
is so that later I can just skip this function in the case where we have
already copied the buffer into skb->head.
Signed-off-by: Alexander Duyck <alexander.h.duyck@...el.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@...el.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@...el.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 94 ++++++++++++++++-----------
1 file changed, 57 insertions(+), 37 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index b0020fc..d926973 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1458,6 +1458,61 @@ static bool ixgbe_is_non_eop(struct ixgbe_ring *rx_ring,
}
/**
+ * ixgbe_pull_tail - ixgbe specific version of skb_pull_tail
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @skb: pointer to current skb being adjusted
+ *
+ * This function is an ixgbe specific version of __pskb_pull_tail. The
+ * main difference between this version and the original function is that
+ * this function can make several assumptions about the state of things
+ * that allow for significant optimizations versus the standard function.
+ * As a result we can do things like drop a frag and maintain an accurate
+ * truesize for the skb.
+ */
+static void ixgbe_pull_tail(struct ixgbe_ring *rx_ring,
+ struct sk_buff *skb)
+{
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
+ unsigned char *va;
+ unsigned int pull_len;
+
+ /*
+ * it is valid to use page_address instead of kmap since we are
+ * working with pages allocated out of the lomem pool per
+ * alloc_page(GFP_ATOMIC)
+ */
+ va = skb_frag_address(frag);
+
+ /*
+ * we need the header to contain the greater of either ETH_HLEN or
+ * 60 bytes if the skb->len is less than 60 for skb_pad.
+ */
+ pull_len = skb_frag_size(frag);
+ if (pull_len > IXGBE_RX_HDR_SIZE)
+ pull_len = ixgbe_get_headlen(va, IXGBE_RX_HDR_SIZE);
+
+ /* align pull length to size of long to optimize memcpy performance */
+ skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
+
+ /* update all of the pointers */
+ skb_frag_size_sub(frag, pull_len);
+ frag->page_offset += pull_len;
+ skb->data_len -= pull_len;
+ skb->tail += pull_len;
+
+ /*
+ * if we sucked the frag empty then we should free it,
+ * if there are other frags here something is screwed up in hardware
+ */
+ if (skb_frag_size(frag) == 0) {
+ BUG_ON(skb_shinfo(skb)->nr_frags != 1);
+ skb_shinfo(skb)->nr_frags = 0;
+ __skb_frag_unref(frag);
+ skb->truesize -= ixgbe_rx_bufsz(rx_ring);
+ }
+}
+
+/**
* ixgbe_dma_sync_frag - perform DMA sync for first frag of SKB
* @rx_ring: rx descriptor ring packet is being transacted on
* @skb: pointer to current skb being updated
@@ -1509,10 +1564,7 @@ static bool ixgbe_cleanup_headers(struct ixgbe_ring *rx_ring,
union ixgbe_adv_rx_desc *rx_desc,
struct sk_buff *skb)
{
- struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
struct net_device *netdev = rx_ring->netdev;
- unsigned char *va;
- unsigned int pull_len;
/* verify that the packet does not have any known errors */
if (unlikely(ixgbe_test_staterr(rx_desc,
@@ -1522,40 +1574,8 @@ static bool ixgbe_cleanup_headers(struct ixgbe_ring *rx_ring,
return true;
}
- /*
- * it is valid to use page_address instead of kmap since we are
- * working with pages allocated out of the lomem pool per
- * alloc_page(GFP_ATOMIC)
- */
- va = skb_frag_address(frag);
-
- /*
- * we need the header to contain the greater of either ETH_HLEN or
- * 60 bytes if the skb->len is less than 60 for skb_pad.
- */
- pull_len = skb_frag_size(frag);
- if (pull_len > IXGBE_RX_HDR_SIZE)
- pull_len = ixgbe_get_headlen(va, IXGBE_RX_HDR_SIZE);
-
- /* align pull length to size of long to optimize memcpy performance */
- skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
-
- /* update all of the pointers */
- skb_frag_size_sub(frag, pull_len);
- frag->page_offset += pull_len;
- skb->data_len -= pull_len;
- skb->tail += pull_len;
-
- /*
- * if we sucked the frag empty then we should free it,
- * if there are other frags here something is screwed up in hardware
- */
- if (skb_frag_size(frag) == 0) {
- BUG_ON(skb_shinfo(skb)->nr_frags != 1);
- skb_shinfo(skb)->nr_frags = 0;
- __skb_frag_unref(frag);
- skb->truesize -= ixgbe_rx_bufsz(rx_ring);
- }
+ /* place header in linear portion of buffer */
+ ixgbe_pull_tail(rx_ring, skb);
#ifdef IXGBE_FCOE
/* do not attempt to pad FCoE Frames as this will disrupt DDP */
--
1.7.11.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists