[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1345538275-1690-7-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Tue, 21 Aug 2012 01:37:55 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jesse Brandeburg <jesse.brandeburg@...el.com>,
netdev@...r.kernel.org, gospo@...hat.com, sassmann@...hat.com,
Carolyn Wyborny <carolyn.wyborny@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 6/6] igb: update to allow reading/setting MDI state
From: Jesse Brandeburg <jesse.brandeburg@...el.com>
This is the implementation for igb to allow forcing MDI state
via ethtool, allowing users to work around some improperly
behaving switches.
Forcing in this driver is for now only allowed when auto-neg is
enabled.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@...el.com>
CC: Carolyn Wyborny <carolyn.wyborny@...el.com>
Tested-by: Aaron Brown aaron.f.brown@...el.com
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/igb/igb_ethtool.c | 42 ++++++++++++++++++++++++++++
drivers/net/ethernet/intel/igb/igb_main.c | 4 +++
2 files changed, 46 insertions(+)
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index a19c84c..cf0e9fb 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -198,6 +198,19 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
}
ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+ /* MDI-X => 2; MDI =>1; Invalid =>0 */
+ if (hw->phy.media_type == e1000_media_type_copper)
+ ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
+ ETH_TP_MDI;
+ else
+ ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+
+ if (hw->phy.mdix == AUTO_ALL_MODES)
+ ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
+ else
+ ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
+
return 0;
}
@@ -214,6 +227,22 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
return -EINVAL;
}
+ /*
+ * MDI setting is only allowed when autoneg enabled because
+ * some hardware doesn't allow MDI setting when speed or
+ * duplex is forced.
+ */
+ if (ecmd->eth_tp_mdix_ctrl) {
+ if (hw->phy.media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
+ (ecmd->autoneg != AUTONEG_ENABLE)) {
+ dev_err(&adapter->pdev->dev, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
+ return -EINVAL;
+ }
+ }
+
while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
msleep(1);
@@ -227,12 +256,25 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
hw->fc.requested_mode = e1000_fc_default;
} else {
u32 speed = ethtool_cmd_speed(ecmd);
+ /* calling this overrides forced MDI setting */
if (igb_set_spd_dplx(adapter, speed, ecmd->duplex)) {
clear_bit(__IGB_RESETTING, &adapter->state);
return -EINVAL;
}
}
+ /* MDI-X => 2; MDI => 1; Auto => 3 */
+ if (ecmd->eth_tp_mdix_ctrl) {
+ /*
+ * fix up the value for auto (3 => 0) as zero is mapped
+ * internally to auto
+ */
+ if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
+ hw->phy.mdix = AUTO_ALL_MODES;
+ else
+ hw->phy.mdix = ecmd->eth_tp_mdix_ctrl;
+ }
+
/* reset the link */
if (netif_running(adapter->netdev)) {
igb_down(adapter);
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index b7c2d50..d4f47a0 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6676,6 +6676,10 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
default:
goto err_inval;
}
+
+ /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
+ adapter->hw.phy.mdix = AUTO_ALL_MODES;
+
return 0;
err_inval:
--
1.7.11.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists