| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5037BC94.1050201@chelsio.com>
Date: Fri, 24 Aug 2012 23:10:36 +0530
From: Naresh Kumar Inna <naresh@...lsio.com>
To: "Nicholas A. Bellinger" <nab@...ux-iscsi.org>
CC: "JBottomley@...allels.com" <JBottomley@...allels.com>,
"linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>,
Dimitrios Michailidis <dm@...lsio.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
Chethan Seshadri <chethan@...lsio.com>
Subject: Re: [PATCH 5/8] csiostor: Chelsio FCoE offload driver submission
(sources part 5).
On 8/24/2012 1:18 AM, Nicholas A. Bellinger wrote:
> On Fri, 2012-08-24 at 03:57 +0530, Naresh Kumar Inna wrote:
>> This patch contains code to implement the interrupt handling and the fast
>> path I/O functionality. The interrupt handling includes allocation of
>> MSIX vectors, registering and implemeting the interrupt service routines.
>> The fast path I/O functionality includes posting the I/O request to firmware
>> via Work Requests, tracking/completing them, and handling task management
>> requests. SCSI midlayer host template implementation is also covered by
>> this patch.
>>
>> Signed-off-by: Naresh Kumar Inna <naresh@...lsio.com>
>> ---
>
> Hi Naresh,
>
> My review comments are inline below..
Hi Nicholas,
Thanks for taking the time to review the driver. Please find my replies
inline.
Regards,
Naresh.
>
>> drivers/scsi/csiostor/csio_isr.c | 631 ++++++++++
>> drivers/scsi/csiostor/csio_scsi.c | 2498 +++++++++++++++++++++++++++++++++++++
>> 2 files changed, 3129 insertions(+), 0 deletions(-)
>> create mode 100644 drivers/scsi/csiostor/csio_isr.c
>> create mode 100644 drivers/scsi/csiostor/csio_scsi.c
>>
>> diff --git a/drivers/scsi/csiostor/csio_isr.c b/drivers/scsi/csiostor/csio_isr.c
>> new file mode 100644
>> index 0000000..96633e9
>> --- /dev/null
>> +++ b/drivers/scsi/csiostor/csio_isr.c
>
> <SNIP>
>
>> +#define csio_extra_msix_desc(_desc, _len, _str, _arg1, _arg2, _arg3) \
>> +do { \
>> + memset((_desc), 0, (_len) + 1); \
>> + snprintf((_desc), (_len), (_str), (_arg1), (_arg2), (_arg3)); \
>> +} while (0)
>> +
>
> This type of macro usage is not necessary for just two users below.
> Please inline code like this.
>
OK, I will get rid of this macro.
>> +static void
>> +csio_add_msix_desc(struct csio_hw *hw)
>> +{
>> + int i;
>> + struct csio_msix_entries *entryp = &hw->msix_entries[0];
>> + int k = CSIO_EXTRA_VECS;
>> + int len = sizeof(entryp->desc) - 1;
>> + int cnt = hw->num_sqsets + k;
>> +
>> + /* Non-data vector */
>> + csio_extra_msix_desc(entryp->desc, len, "csio-%02x:%02x:%x-nondata",
>> + CSIO_PCI_BUS(hw), CSIO_PCI_DEV(hw),
>> + CSIO_PCI_FUNC(hw));
>> + entryp++;
>> + csio_extra_msix_desc(entryp->desc, len, "csio-%02x:%02x:%x-fwevt",
>> + CSIO_PCI_BUS(hw), CSIO_PCI_DEV(hw),
>> + CSIO_PCI_FUNC(hw));
>> + entryp++;
>> +
>> + /* Name SCSI vecs */
>> + for (i = k; i < cnt; i++, entryp++) {
>> + memset(entryp->desc, 0, len + 1);
>> + snprintf(entryp->desc, len, "csio-%02x:%02x:%x-scsi%d",
>> + CSIO_PCI_BUS(hw), CSIO_PCI_DEV(hw),
>> + CSIO_PCI_FUNC(hw), i - CSIO_EXTRA_VECS);
>> + }
>> +}
>> +
>
>
>> diff --git a/drivers/scsi/csiostor/csio_scsi.c b/drivers/scsi/csiostor/csio_scsi.c
>> new file mode 100644
>> index 0000000..0f87b00
>> --- /dev/null
>> +++ b/drivers/scsi/csiostor/csio_scsi.c
>
>> +
>> +/*
>> + * csio_scsi_match_io - Match an ioreq with the given SCSI level data.
>> + * @ioreq: The I/O request
>> + * @sld: Level information
>> + *
>> + * Should be called with lock held.
>> + *
>> + */
>> +static bool
>> +csio_scsi_match_io(struct csio_ioreq *ioreq, struct csio_scsi_level_data *sld)
>> +{
>> + struct scsi_cmnd *scmnd = csio_scsi_cmnd(ioreq);
>> +
>> + switch (sld->level) {
>> + case CSIO_LEV_LUN:
>> + if (scmnd == NULL)
>> + return CSIO_FALSE;
>> +
>> + return ((ioreq->lnode == sld->lnode) &&
>> + (ioreq->rnode == sld->rnode) &&
>> + ((uint64_t)scmnd->device->lun == sld->oslun));
>> +
>> + case CSIO_LEV_RNODE:
>> + return ((ioreq->lnode == sld->lnode) &&
>> + (ioreq->rnode == sld->rnode));
>> + case CSIO_LEV_LNODE:
>> + return (ioreq->lnode == sld->lnode);
>> + case CSIO_LEV_ALL:
>> + return CSIO_TRUE;
>> + default:
>> + return CSIO_FALSE;
>> + }
>> +}
>> +
>
> Why can't CSIO_[TRUE,FALSE] just use normal Boolean defines..?
>
Is there a TRUE/FALSE define in a standard header file? I see a lot of
kernel code defining their own TRUE/FALSE.
>> +/*
>> + * csio_scsi_fcp_cmnd - Frame the SCSI FCP command paylod.
>> + * @req: IO req structure.
>> + * @addr: DMA location to place the payload.
>> + *
>> + * This routine is shared between FCP_WRITE, FCP_READ and FCP_CMD requests.
>> + */
>> +static inline void
>> +csio_scsi_fcp_cmnd(struct csio_ioreq *req, void *addr)
>> +{
>> + struct csio_fcp_cmnd *fcp_cmnd = (struct csio_fcp_cmnd *)addr;
>> + struct scsi_cmnd *scmnd = csio_scsi_cmnd(req);
>> +
>> + /* Check for Task Management */
>> + if (likely(scmnd->SCp.Message == 0)) {
>> + int_to_scsilun(scmnd->device->lun,
>> + (struct scsi_lun *)fcp_cmnd->lun);
>> + fcp_cmnd->tm_flags = 0;
>> + fcp_cmnd->cmdref = 0;
>> + fcp_cmnd->pri_ta = 0;
>> +
>> + memcpy(fcp_cmnd->cdb, scmnd->cmnd, 16);
>> + csio_scsi_tag(scmnd, &fcp_cmnd->pri_ta,
>> + FCP_PTA_HEADQ, FCP_PTA_ORDERED, FCP_PTA_SIMPLE);
>> + fcp_cmnd->dl = cpu_to_be32(scsi_bufflen(scmnd));
>> +
>> + if (req->nsge)
>> + if (req->datadir == CSIO_IOREQF_DMA_WRITE)
>
> The same goes for CSIO_IOREQF_DMA_*...
>
> Why can't this just be DMA_* defs from include/linux/dma-direction.h..?
OK, I will get rid of them and use the standard defines.
>
>> + fcp_cmnd->flags = FCP_CFL_WRDATA;
>> + else
>> + fcp_cmnd->flags = FCP_CFL_RDDATA;
>> + else
>> + fcp_cmnd->flags = 0;
>> + } else {
>> + memset(fcp_cmnd, 0, sizeof(*fcp_cmnd));
>> + int_to_scsilun(scmnd->device->lun,
>> + (struct scsi_lun *)fcp_cmnd->lun);
>> + fcp_cmnd->tm_flags = (uint8_t)scmnd->SCp.Message;
>> + }
>> +}
>> +
>
>
>
>> +
>> +#define CSIO_SCSI_CMD_WR_SZ(_imm) \
>> + (sizeof(struct fw_scsi_cmd_wr) + /* WR size */ \
>> + ALIGN((_imm), 16)) /* Immed data */
>> +
>> +#define CSIO_SCSI_CMD_WR_SZ_16(_imm) \
>> + (ALIGN(CSIO_SCSI_CMD_WR_SZ((_imm)), 16))
>> +
>> +/*
>> + * csio_scsi_cmd - Create a SCSI CMD WR.
>> + * @req: IO req structure.
>> + *
>> + * Gets a WR slot in the ingress queue and initializes it with SCSI CMD WR.
>> + *
>> + */
>> +static inline void
>> +csio_scsi_cmd(struct csio_ioreq *req)
>> +{
>> + struct csio_wr_pair wrp;
>> + struct csio_hw *hw = req->lnode->hwp;
>> + struct csio_scsim *scsim = csio_hw_to_scsim(hw);
>> + uint32_t size = CSIO_SCSI_CMD_WR_SZ_16(scsim->proto_cmd_len);
>> +
>> + req->drv_status = csio_wr_get(hw, req->eq_idx, size, &wrp);
>> + if (unlikely(req->drv_status != CSIO_SUCCESS))
>> + return;
>> +
>> + if (wrp.size1 >= size) {
>> + /* Initialize WR in one shot */
>> + csio_scsi_init_cmd_wr(req, wrp.addr1, size);
>> + } else {
>> + uint8_t tmpwr[512];
>
> Mmmm, putting this large of a buffer on the local stack is probably not
> a good idea.
>
> This should become an allocation.. If it's a hot path then you'll
> probably want to set this up before-hand.
>
The else switch above is entered only when we near the end of the DMA
ring. This is not a frequent occurrence. If it is a strict no-no to have
so many on-stack bytes, I have to think of a way re-work it to use
pre-allocated memory. Please let me know.
>> + /*
>> + * Make a temporary copy of the WR and write back
>> + * the copy into the WR pair.
>> + */
>> + csio_scsi_init_cmd_wr(req, (void *)tmpwr, size);
>> + memcpy(wrp.addr1, tmpwr, wrp.size1);
>> + memcpy(wrp.addr2, tmpwr + wrp.size1, size - wrp.size1);
>> + }
>> +}
>> +
>> +/*
>> + * The following is fast path code. Therefore it is inlined with multi-line
>> + * macros using name substitution, thus avoiding if-else switches for
>> + * operation (read/write), as well as serving the purpose of code re-use.
>> + */
>> +/*
>> + * csio_scsi_init_ulptx_dsgl - Fill in a ULP_TX_SC_DSGL
>> + * @hw: HW module
>> + * @req: IO request
>> + * @sgl: ULP TX SGL pointer.
>> + *
>> + */
>> +#define csio_scsi_init_ultptx_dsgl(hw, req, sgl) \
>> +do { \
>> + struct ulptx_sge_pair *_sge_pair = NULL; \
>> + struct scatterlist *_sgel; \
>> + uint32_t _i = 0; \
>> + uint32_t _xfer_len; \
>> + struct list_head *_tmp; \
>> + struct csio_dma_buf *_dma_buf; \
>> + struct scsi_cmnd *scmnd = csio_scsi_cmnd((req)); \
>> + \
>> + (sgl)->cmd_nsge = htonl(ULPTX_CMD(ULP_TX_SC_DSGL) | ULPTX_MORE | \
>> + ULPTX_NSGE((req)->nsge)); \
>> + /* Now add the data SGLs */ \
>> + if (likely(!(req)->dcopy)) { \
>> + scsi_for_each_sg(scmnd, _sgel, (req)->nsge, _i) { \
>> + if (_i == 0) { \
>> + (sgl)->addr0 = cpu_to_be64( \
>> + sg_dma_address(_sgel)); \
>> + (sgl)->len0 = cpu_to_be32( \
>> + sg_dma_len(_sgel)); \
>> + _sge_pair = \
>> + (struct ulptx_sge_pair *)((sgl) + 1); \
>> + continue; \
>> + } \
>> + if ((_i - 1) & 0x1) { \
>> + _sge_pair->addr[1] = cpu_to_be64( \
>> + sg_dma_address(_sgel)); \
>> + _sge_pair->len[1] = cpu_to_be32( \
>> + sg_dma_len(_sgel)); \
>> + _sge_pair++; \
>> + } else { \
>> + _sge_pair->addr[0] = cpu_to_be64( \
>> + sg_dma_address(_sgel)); \
>> + _sge_pair->len[0] = cpu_to_be32( \
>> + sg_dma_len(_sgel)); \
>> + } \
>> + } \
>> + } else { \
>> + /* Program sg elements with driver's DDP buffer */ \
>> + _xfer_len = scsi_bufflen(scmnd); \
>> + list_for_each(_tmp, &(req)->gen_list) { \
>> + _dma_buf = (struct csio_dma_buf *)_tmp; \
>> + if (_i == 0) { \
>> + (sgl)->addr0 = cpu_to_be64(_dma_buf->paddr); \
>> + (sgl)->len0 = cpu_to_be32( \
>> + min(_xfer_len, _dma_buf->len)); \
>> + _sge_pair = \
>> + (struct ulptx_sge_pair *)((sgl) + 1); \
>> + } \
>> + else if ((_i - 1) & 0x1) { \
>> + _sge_pair->addr[1] = cpu_to_be64( \
>> + _dma_buf->paddr); \
>> + _sge_pair->len[1] = cpu_to_be32( \
>> + min(_xfer_len, _dma_buf->len)); \
>> + _sge_pair++; \
>> + } else { \
>> + _sge_pair->addr[0] = cpu_to_be64( \
>> + _dma_buf->paddr); \
>> + _sge_pair->len[0] = cpu_to_be32( \
>> + min(_xfer_len, _dma_buf->len)); \
>> + } \
>> + _xfer_len -= min(_xfer_len, _dma_buf->len); \
>> + _i++; \
>> + } \
>> + } \
>> +} while (0)
>> +
>
> I don't see any reason why this can't just be a static function..? Why
> is the macro usage necessary here..?
OK, I will make this static-inline.
>
>> +/*
>> + * csio_scsi_init_data_wr - Initialize the READ/WRITE SCSI WR.
>> + * @req: IO req structure.
>> + * @oper: read/write
>> + * @wrp: DMA location to place the payload.
>> + * @size: Size of WR (including FW WR + immed data + rsp SG entry + data SGL
>> + * @wrop: _READ_/_WRITE_
>> + *
>> + * Wrapper for populating fw_scsi_read_wr/fw_scsi_write_wr.
>> + */
>> +#define csio_scsi_init_data_wr(req, oper, wrp, size, wrop) \
>> +do { \
>> + struct csio_hw *_hw = (req)->lnode->hwp; \
>> + struct csio_rnode *_rn = (req)->rnode; \
>> + struct fw_scsi_##oper##_wr *__wr = (struct fw_scsi_##oper##_wr *)(wrp);\
>> + struct ulptx_sgl *_sgl; \
>> + struct csio_dma_buf *_dma_buf; \
>> + uint8_t _imm = csio_hw_to_scsim(_hw)->proto_cmd_len; \
>> + struct scsi_cmnd *scmnd = csio_scsi_cmnd((req)); \
>> + \
>> + __wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_SCSI##wrop##WR) | \
>> + FW_SCSI##wrop##WR_IMMDLEN(_imm)); \
>> + __wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(_rn->flowid) | \
>> + FW_WR_LEN16( \
>> + CSIO_ROUNDUP((size), 16))); \
>> + __wr->cookie = (uintptr_t) (req); \
>> + __wr->iqid = (uint16_t)cpu_to_be16(csio_q_physiqid(_hw, \
>> + (req)->iq_idx));\
>> + __wr->tmo_val = (uint8_t)((req)->tmo); \
>> + __wr->use_xfer_cnt = 1; \
>> + __wr->xfer_cnt = cpu_to_be32(scsi_bufflen(scmnd)); \
>> + __wr->ini_xfer_cnt = cpu_to_be32(scsi_bufflen(scmnd)); \
>> + /* Get RSP DMA buffer */ \
>> + _dma_buf = &(req)->dma_buf; \
>> + \
>> + /* Prepare RSP SGL */ \
>> + __wr->rsp_dmalen = cpu_to_be32(_dma_buf->len); \
>> + __wr->rsp_dmaaddr = cpu_to_be64(_dma_buf->paddr); \
>> + \
>> + __wr->r4 = 0; \
>> + \
>> + __wr->u.fcoe.ctl_pri = 0; \
>> + __wr->u.fcoe.cp_en_class = 0; \
>> + __wr->u.fcoe.r3_lo[0] = 0; \
>> + __wr->u.fcoe.r3_lo[1] = 0; \
>> + csio_scsi_fcp_cmnd((req), (void *)((uintptr_t)(wrp) + \
>> + sizeof(struct fw_scsi_##oper##_wr))); \
>> + \
>> + /* Move WR pointer past command and immediate data */ \
>> + _sgl = (struct ulptx_sgl *) ((uintptr_t)(wrp) + \
>> + sizeof(struct fw_scsi_##oper##_wr) + \
>> + ALIGN(_imm, 16)); \
>> + \
>> + /* Fill in the DSGL */ \
>> + csio_scsi_init_ultptx_dsgl(_hw, (req), _sgl); \
>> + \
>> +} while (0)
>> +
>
> This one has four uses of CPP keys. Just turn those into macros, and
> leave the rest of the code in a static function.
>
So what you are suggesting is to have all the lines of the macro
csio_scsi_init_data_wr() added into a static function, but for the ones
with the 4 keys. csio_scsi_init_data_wr() will then invoke this new
function. Is that correct?
>> +/* Calculate WR size needed for fw_scsi_read_wr/fw_scsi_write_wr */
>> +#define csio_scsi_data_wrsz(req, oper, sz, imm) \
>> +do { \
>> + (sz) = sizeof(struct fw_scsi_##oper##_wr) + /* WR size */ \
>> + ALIGN((imm), 16) + /* Immed data */ \
>> + sizeof(struct ulptx_sgl); /* ulptx_sgl */ \
>> + \
>> + if (unlikely((req)->nsge > 1)) \
>> + (sz) += (sizeof(struct ulptx_sge_pair) * \
>> + (ALIGN(((req)->nsge - 1), 2) / 2)); \
>> + /* Data SGE */ \
>> +} while (0)
>> +
>> +/*
>> + * csio_scsi_data - Create a SCSI WRITE/READ WR.
>> + * @req: IO req structure.
>> + * @oper: read/write
>> + * @wrop: _READ_/_WRITE_ (string subsitutions to use with the FW bit field
>> + * macros).
>> + *
>> + * Gets a WR slot in the ingress queue and initializes it with
>> + * SCSI CMD READ/WRITE WR.
>> + *
>> + */
>> +#define csio_scsi_data(req, oper, wrop) \
>> +do { \
>> + struct csio_wr_pair _wrp; \
>> + uint32_t _size; \
>> + struct csio_hw *_hw = (req)->lnode->hwp; \
>> + struct csio_scsim *_scsim = csio_hw_to_scsim(_hw); \
>> + \
>> + csio_scsi_data_wrsz((req), oper, _size, _scsim->proto_cmd_len); \
>> + _size = ALIGN(_size, 16); \
>> + \
>> + (req)->drv_status = csio_wr_get(_hw, (req)->eq_idx, _size, &_wrp); \
>> + if (likely((req)->drv_status == CSIO_SUCCESS)) { \
>> + if (likely(_wrp.size1 >= _size)) { \
>> + /* Initialize WR in one shot */ \
>> + csio_scsi_init_data_wr((req), oper, _wrp.addr1, \
>> + _size, wrop); \
>> + } else { \
>> + uint8_t tmpwr[512]; \
>> + /* \
>> + * Make a temporary copy of the WR and write back \
>> + * the copy into the WR pair. \
>> + */ \
>> + csio_scsi_init_data_wr((req), oper, (void *)tmpwr, \
>> + _size, wrop); \
>> + memcpy(_wrp.addr1, tmpwr, _wrp.size1); \
>> + memcpy(_wrp.addr2, tmpwr + _wrp.size1, \
>> + _size - _wrp.size1); \
>> + } \
>> + } \
>> +} while (0)
>> +
>
> Ditto on this one, along with the tmpwr[512] stack usage..
>
>> +static inline void
>> +csio_scsi_abrt_cls(struct csio_ioreq *req, bool abort)
>> +{
>> + struct csio_wr_pair wrp;
>> + struct csio_hw *hw = req->lnode->hwp;
>> + uint32_t size = ALIGN(sizeof(struct fw_scsi_abrt_cls_wr), 16);
>> +
>> + req->drv_status = csio_wr_get(hw, req->eq_idx, size, &wrp);
>> + if (req->drv_status != CSIO_SUCCESS)
>> + return;
>> +
>> + if (wrp.size1 >= size) {
>> + /* Initialize WR in one shot */
>> + csio_scsi_init_abrt_cls_wr(req, wrp.addr1, size, abort);
>> + } else {
>> + uint8_t tmpwr[512];
>
> Ditto here on local scope stack usage..
>
>> + /*
>> + * Make a temporary copy of the WR and write back
>> + * the copy into the WR pair.
>> + */
>> + csio_scsi_init_abrt_cls_wr(req, (void *)tmpwr, size, abort);
>> + memcpy(wrp.addr1, tmpwr, wrp.size1);
>> + memcpy(wrp.addr2, tmpwr + wrp.size1, size - wrp.size1);
>> + }
>> +}
>> +
>> +/*****************************************************************************/
>> +/* START: SCSI SM */
>> +/*****************************************************************************/
>> +static void
>> +csio_scsis_uninit(struct csio_ioreq *req, enum csio_scsi_ev evt)
>> +{
>> + struct csio_hw *hw = req->lnode->hwp;
>> + struct csio_scsim *scsim = csio_hw_to_scsim(hw);
>> +
>> + switch (evt) {
>> +
>> + case CSIO_SCSIE_START_IO:
>
> Extra space between start of first switch case
OK, I will remove it. Is there any tool that catches such deviations?
checkpath.pl didnt report it.
>
>> +
>> + /* There is data */
>
> Point-less comment
I will remove it.
>
>> + if (req->nsge) {
>> + if (req->datadir == CSIO_IOREQF_DMA_WRITE) {
>> + req->dcopy = 0;
>> + csio_scsi_data(req, write, _WRITE_);
>> + } else
>> + csio_setup_ddp(scsim, req);
>> + } else {
>> + csio_scsi_cmd(req);
>> + }
>> +
>> + if (likely(req->drv_status == CSIO_SUCCESS)) {
>> + /* change state and enqueue on active_q */
>> + csio_set_state(&req->sm, csio_scsis_io_active);
>> + list_add_tail(&req->sm.sm_list, &scsim->active_q);
>> + csio_wr_issue(hw, req->eq_idx, CSIO_FALSE);
>> + csio_inc_stats(scsim, n_active);
>> +
>> + return;
>> + }
>> + break;
>> +
>> + case CSIO_SCSIE_START_TM:
>> + csio_scsi_cmd(req);
>> + if (req->drv_status == CSIO_SUCCESS) {
>> + /*
>> + * NOTE: We collect the affected I/Os prior to issuing
>> + * LUN reset, and not after it. This is to prevent
>> + * aborting I/Os that get issued after the LUN reset,
>> + * but prior to LUN reset completion (in the event that
>> + * the host stack has not blocked I/Os to a LUN that is
>> + * being reset.
>> + */
>> + csio_set_state(&req->sm, csio_scsis_tm_active);
>> + list_add_tail(&req->sm.sm_list, &scsim->active_q);
>> + csio_wr_issue(hw, req->eq_idx, CSIO_FALSE);
>> + csio_inc_stats(scsim, n_tm_active);
>> + }
>> + return;
>> +
>> + case CSIO_SCSIE_ABORT:
>> + case CSIO_SCSIE_CLOSE:
>> + /*
>> + * NOTE:
>> + * We could get here due to :
>> + * - a window in the cleanup path of the SCSI module
>> + * (csio_scsi_abort_io()). Please see NOTE in this function.
>> + * - a window in the time we tried to issue an abort/close
>> + * of a request to FW, and the FW completed the request
>> + * itself.
>> + * Print a message for now, and return INVAL either way.
>> + */
>> + req->drv_status = CSIO_INVAL;
>> + csio_warn(hw, "Trying to abort/close completed IO:%p!\n", req);
>> + break;
>> +
>> + default:
>> + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req);
>> + CSIO_DB_ASSERT(0);
>> + }
>> +}
>> +
>> +static void
>> +csio_scsis_io_active(struct csio_ioreq *req, enum csio_scsi_ev evt)
>> +{
>> + struct csio_hw *hw = req->lnode->hwp;
>> + struct csio_scsim *scm = csio_hw_to_scsim(hw);
>> + struct csio_rnode *rn;
>> +
>> + switch (evt) {
>> +
>> + case CSIO_SCSIE_COMPLETED:
>
> Ditto
>
>> + csio_dec_stats(scm, n_active);
>> + list_del_init(&req->sm.sm_list);
>> + csio_set_state(&req->sm, csio_scsis_uninit);
>> + /*
>> + * In MSIX mode, with multiple queues, the SCSI compeltions
>> + * could reach us sooner than the FW events sent to indicate
>> + * I-T nexus loss (link down, remote device logo etc). We
>> + * dont want to be returning such I/Os to the upper layer
>> + * immediately, since we wouldnt have reported the I-T nexus
>> + * loss itself. This forces us to serialize such completions
>> + * with the reporting of the I-T nexus loss. Therefore, we
>> + * internally queue up such up such completions in the rnode.
>> + * The reporting of I-T nexus loss to the upper layer is then
>> + * followed by the returning of I/Os in this internal queue.
>> + * Having another state alongwith another queue helps us take
>> + * actions for events such as ABORT received while we are
>> + * in this rnode queue.
>> + */
>> + if (unlikely(req->wr_status != FW_SUCCESS)) {
>> + rn = req->rnode;
>> + /*
>> + * FW says remote device is lost, but rnode
>> + * doesnt reflect it.
>> + */
>> + if (csio_scsi_itnexus_loss_error(req->wr_status) &&
>> + csio_is_rnode_ready(rn)) {
>> + csio_set_state(&req->sm,
>> + csio_scsis_shost_cmpl_await);
>> + list_add_tail(&req->sm.sm_list,
>> + &rn->host_cmpl_q);
>> + }
>> + }
>> +
>> + break;
>> +
>> + case CSIO_SCSIE_ABORT:
>> + csio_scsi_abrt_cls(req, SCSI_ABORT);
>> + if (req->drv_status == CSIO_SUCCESS) {
>> + csio_wr_issue(hw, req->eq_idx, CSIO_FALSE);
>> + csio_set_state(&req->sm, csio_scsis_aborting);
>> + }
>> + break;
>> +
>> + case CSIO_SCSIE_CLOSE:
>> + csio_scsi_abrt_cls(req, SCSI_CLOSE);
>> + if (req->drv_status == CSIO_SUCCESS) {
>> + csio_wr_issue(hw, req->eq_idx, CSIO_FALSE);
>> + csio_set_state(&req->sm, csio_scsis_closing);
>> + }
>> + break;
>> +
>> + case CSIO_SCSIE_DRVCLEANUP:
>> + req->wr_status = FW_HOSTERROR;
>> + csio_dec_stats(scm, n_active);
>> + csio_set_state(&req->sm, csio_scsis_uninit);
>> + break;
>> +
>> + default:
>> + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req);
>> + CSIO_DB_ASSERT(0);
>> + }
>> +}
>> +
>> +static void
>> +csio_scsis_tm_active(struct csio_ioreq *req, enum csio_scsi_ev evt)
>> +{
>> + struct csio_hw *hw = req->lnode->hwp;
>> + struct csio_scsim *scm = csio_hw_to_scsim(hw);
>> +
>> + switch (evt) {
>> +
>> + case CSIO_SCSIE_COMPLETED:
>
> Ditto
>
>> + csio_dec_stats(scm, n_tm_active);
>> + list_del_init(&req->sm.sm_list);
>> + csio_set_state(&req->sm, csio_scsis_uninit);
>> +
>> + break;
>> +
>> + case CSIO_SCSIE_ABORT:
>> + csio_scsi_abrt_cls(req, SCSI_ABORT);
>> + if (req->drv_status == CSIO_SUCCESS) {
>> + csio_wr_issue(hw, req->eq_idx, CSIO_FALSE);
>> + csio_set_state(&req->sm, csio_scsis_aborting);
>> + }
>> + break;
>> +
>> +
>> + case CSIO_SCSIE_CLOSE:
>> + csio_scsi_abrt_cls(req, SCSI_CLOSE);
>> + if (req->drv_status == CSIO_SUCCESS) {
>> + csio_wr_issue(hw, req->eq_idx, CSIO_FALSE);
>> + csio_set_state(&req->sm, csio_scsis_closing);
>> + }
>> + break;
>> +
>> + case CSIO_SCSIE_DRVCLEANUP:
>> + req->wr_status = FW_HOSTERROR;
>> + csio_dec_stats(scm, n_tm_active);
>> + csio_set_state(&req->sm, csio_scsis_uninit);
>> + break;
>> +
>> + default:
>> + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req);
>> + CSIO_DB_ASSERT(0);
>> + }
>> +}
>> +
>> +static void
>> +csio_scsis_aborting(struct csio_ioreq *req, enum csio_scsi_ev evt)
>> +{
>> + struct csio_hw *hw = req->lnode->hwp;
>> + struct csio_scsim *scm = csio_hw_to_scsim(hw);
>> +
>> + switch (evt) {
>> +
>> + case CSIO_SCSIE_COMPLETED:
>
> Ditto
>
>> + csio_dbg(hw,
>> + "ioreq %p recvd cmpltd (wr_status:%d) "
>> + "in aborting st\n", req, req->wr_status);
>> + /*
>> + * Use CSIO_CANCELLED to explicitly tell the ABORTED event that
>> + * the original I/O was returned to driver by FW.
>> + * We dont really care if the I/O was returned with success by
>> + * FW (because the ABORT and completion of the I/O crossed each
>> + * other), or any other return value. Once we are in aborting
>> + * state, the success or failure of the I/O is unimportant to
>> + * us.
>> + */
>> + req->drv_status = CSIO_CANCELLED;
>> + break;
>> +
>> + case CSIO_SCSIE_ABORT:
>> + csio_inc_stats(scm, n_abrt_dups);
>> + break;
>> +
>> + case CSIO_SCSIE_ABORTED:
>> +
>> + csio_dbg(hw, "abort of %p return status:0x%x drv_status:%x\n",
>> + req, req->wr_status, req->drv_status);
>> + /*
>> + * Check if original I/O WR completed before the Abort
>> + * completion.
>> + */
>> + if (req->drv_status != CSIO_CANCELLED) {
>> + csio_fatal(hw,
>> + "Abort completed before original I/O,"
>> + " req:%p\n", req);
>> + CSIO_DB_ASSERT(0);
>> + }
>> +
>> + /*
>> + * There are the following possible scenarios:
>> + * 1. The abort completed successfully, FW returned FW_SUCCESS.
>> + * 2. The completion of an I/O and the receipt of
>> + * abort for that I/O by the FW crossed each other.
>> + * The FW returned FW_EINVAL. The original I/O would have
>> + * returned with FW_SUCCESS or any other SCSI error.
>> + * 3. The FW couldnt sent the abort out on the wire, as there
>> + * was an I-T nexus loss (link down, remote device logged
>> + * out etc). FW sent back an appropriate IT nexus loss status
>> + * for the abort.
>> + * 4. FW sent an abort, but abort timed out (remote device
>> + * didnt respond). FW replied back with
>> + * FW_SCSI_ABORT_TIMEDOUT.
>> + * 5. FW couldnt genuinely abort the request for some reason,
>> + * and sent us an error.
>> + *
>> + * The first 3 scenarios are treated as succesful abort
>> + * operations by the host, while the last 2 are failed attempts
>> + * to abort. Manipulate the return value of the request
>> + * appropriately, so that host can convey these results
>> + * back to the upper layer.
>> + */
>> + if ((req->wr_status == FW_SUCCESS) ||
>> + (req->wr_status == FW_EINVAL) ||
>> + csio_scsi_itnexus_loss_error(req->wr_status))
>> + req->wr_status = FW_SCSI_ABORT_REQUESTED;
>> +
>> + csio_dec_stats(scm, n_active);
>> + list_del_init(&req->sm.sm_list);
>> + csio_set_state(&req->sm, csio_scsis_uninit);
>> + break;
>> +
>> + case CSIO_SCSIE_DRVCLEANUP:
>> + req->wr_status = FW_HOSTERROR;
>> + csio_dec_stats(scm, n_active);
>> + csio_set_state(&req->sm, csio_scsis_uninit);
>> + break;
>> +
>> + case CSIO_SCSIE_CLOSE:
>> + /*
>> + * We can receive this event from the module
>> + * cleanup paths, if the FW forgot to reply to the ABORT WR
>> + * and left this ioreq in this state. For now, just ignore
>> + * the event. The CLOSE event is sent to this state, as
>> + * the LINK may have already gone down.
>> + */
>> + break;
>> +
>> + default:
>> + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req);
>> + CSIO_DB_ASSERT(0);
>> + }
>> +}
>> +
>> +static void
>> +csio_scsis_closing(struct csio_ioreq *req, enum csio_scsi_ev evt)
>> +{
>> + struct csio_hw *hw = req->lnode->hwp;
>> + struct csio_scsim *scm = csio_hw_to_scsim(hw);
>> +
>> + switch (evt) {
>> +
>> + case CSIO_SCSIE_COMPLETED:
>
> Ditto
>
>> + csio_dbg(hw,
>> + "ioreq %p recvd cmpltd (wr_status:%d) "
>> + "in closing st\n", req, req->wr_status);
>> + /*
>> + * Use CSIO_CANCELLED to explicitly tell the CLOSED event that
>> + * the original I/O was returned to driver by FW.
>> + * We dont really care if the I/O was returned with success by
>> + * FW (because the CLOSE and completion of the I/O crossed each
>> + * other), or any other return value. Once we are in aborting
>> + * state, the success or failure of the I/O is unimportant to
>> + * us.
>> + */
>> + req->drv_status = CSIO_CANCELLED;
>> + break;
>> +
>> + case CSIO_SCSIE_CLOSED:
>> + /*
>> + * Check if original I/O WR completed before the Close
>> + * completion.
>> + */
>> + if (req->drv_status != CSIO_CANCELLED) {
>> + csio_fatal(hw,
>> + "Close completed before original I/O,"
>> + " req:%p\n", req);
>> + CSIO_DB_ASSERT(0);
>> + }
>> +
>> + /*
>> + * Either close succeeded, or we issued close to FW at the
>> + * same time FW compelted it to us. Either way, the I/O
>> + * is closed.
>> + */
>> + CSIO_DB_ASSERT((req->wr_status == FW_SUCCESS) ||
>> + (req->wr_status == FW_EINVAL));
>> + req->wr_status = FW_SCSI_CLOSE_REQUESTED;
>> +
>> + csio_dec_stats(scm, n_active);
>> + list_del_init(&req->sm.sm_list);
>> + csio_set_state(&req->sm, csio_scsis_uninit);
>> + break;
>> +
>> + case CSIO_SCSIE_CLOSE:
>> + break;
>> +
>> + case CSIO_SCSIE_DRVCLEANUP:
>> + req->wr_status = FW_HOSTERROR;
>> + csio_dec_stats(scm, n_active);
>> + csio_set_state(&req->sm, csio_scsis_uninit);
>> + break;
>> +
>> + default:
>> + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req);
>> + CSIO_DB_ASSERT(0);
>> + }
>> +}
>> +
>> +static void
>> +csio_scsis_shost_cmpl_await(struct csio_ioreq *req, enum csio_scsi_ev evt)
>> +{
>> + switch (evt) {
>> + case CSIO_SCSIE_ABORT:
>> + case CSIO_SCSIE_CLOSE:
>> + /*
>> + * Just succeed the abort request, and hope that
>> + * the remote device unregister path will cleanup
>> + * this I/O to the upper layer within a sane
>> + * amount of time.
>> + */
>> + /*
>> + * A close can come in during a LINK DOWN. The FW would have
>> + * returned us the I/O back, but not the remote device lost
>> + * FW event. In this interval, if the I/O times out at the upper
>> + * layer, a close can come in. Take the same action as abort:
>> + * return success, and hope that the remote device unregister
>> + * path will cleanup this I/O. If the FW still doesnt send
>> + * the msg, the close times out, and the upper layer resorts
>> + * to the next level of error recovery.
>> + */
>> + req->drv_status = CSIO_SUCCESS;
>> + break;
>> + case CSIO_SCSIE_DRVCLEANUP:
>> + csio_set_state(&req->sm, csio_scsis_uninit);
>> + break;
>> + default:
>> + csio_dbg(req->lnode->hwp, "Unhandled event:%d sent to req:%p\n",
>> + evt, req);
>> + CSIO_DB_ASSERT(0);
>> + }
>> +}
>> +
>
>
>> +
>> +/**
>> + * csio_queuecommand_lck - Entry point to kickstart an I/O request.
>> + * @cmnd: The I/O request from ML.
>> + * @done: The ML callback routine.
>> + *
>> + * This routine does the following:
>> + * - Checks for HW and Rnode module readiness.
>> + * - Gets a free ioreq structure (which is already initialized
>> + * to uninit during its allocation).
>> + * - Maps SG elements.
>> + * - Initializes ioreq members.
>> + * - Kicks off the SCSI state machine for this IO.
>> + * - Returns busy status on error.
>> + */
>> +static int
>> +csio_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done)(struct scsi_cmnd *))
>> +{
>> + struct csio_lnode *ln = shost_priv(cmnd->device->host);
>> + struct csio_hw *hw = csio_lnode_to_hw(ln);
>> + struct csio_scsim *scsim = csio_hw_to_scsim(hw);
>> + struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata);
>> + struct csio_ioreq *ioreq = NULL;
>> + unsigned long flags;
>> + int nsge = 0;
>> + int rv = SCSI_MLQUEUE_HOST_BUSY, nr;
>> + csio_retval_t retval;
>> + int cpu;
>> + struct csio_scsi_qset *sqset;
>> + struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
>> +
>> + if (!blk_rq_cpu_valid(cmnd->request))
>> + cpu = smp_processor_id();
>> + else
>> + cpu = cmnd->request->cpu;
>> +
>> + sqset = &hw->sqset[ln->portid][cpu];
>> +
>> + nr = fc_remote_port_chkready(rport);
>> + if (nr) {
>> + cmnd->result = nr;
>> + csio_inc_stats(scsim, n_rn_nr_error);
>> + goto err_done;
>> + }
>> +
>> + if (unlikely(!csio_is_hw_ready(hw))) {
>> + cmnd->result = (DID_REQUEUE << 16);
>> + csio_inc_stats(scsim, n_hw_nr_error);
>> + goto err_done;
>> + }
>> +
>> + /* Get req->nsge, if there are SG elements to be mapped */
>> + nsge = scsi_dma_map(cmnd);
>> + if (unlikely(nsge < 0)) {
>> + csio_inc_stats(scsim, n_dmamap_error);
>> + goto err;
>> + }
>> +
>> + /* Do we support so many mappings? */
>> + if (unlikely(nsge > scsim->max_sge)) {
>> + csio_warn(hw,
>> + "More SGEs than can be supported."
>> + " SGEs: %d, Max SGEs: %d\n", nsge, scsim->max_sge);
>> + csio_inc_stats(scsim, n_unsupp_sge_error);
>> + goto err_dma_unmap;
>> + }
>> +
>> + /* Get a free ioreq structure - SM is already set to uninit */
>> + ioreq = csio_get_scsi_ioreq_lock(hw, scsim);
>> + if (!ioreq) {
>> + csio_err(hw, "Out of I/O request elements. Active #:%d\n",
>> + scsim->stats.n_active);
>> + csio_inc_stats(scsim, n_no_req_error);
>> + goto err_dma_unmap;
>> + }
>> +
>> + ioreq->nsge = nsge;
>> + ioreq->lnode = ln;
>> + ioreq->rnode = rn;
>> + ioreq->iq_idx = sqset->iq_idx;
>> + ioreq->eq_idx = sqset->eq_idx;
>> + ioreq->wr_status = 0;
>> + ioreq->drv_status = CSIO_SUCCESS;
>> + csio_scsi_cmnd(ioreq) = (void *)cmnd;
>> + ioreq->tmo = 0;
>> +
>> + switch (cmnd->sc_data_direction) {
>> + case DMA_BIDIRECTIONAL:
>> + ioreq->datadir = CSIO_IOREQF_DMA_BIDI;
>> + csio_inc_stats(ln, n_control_requests);
>> + break;
>> + case DMA_TO_DEVICE:
>> + ioreq->datadir = CSIO_IOREQF_DMA_WRITE;
>> + csio_inc_stats(ln, n_output_requests);
>> + ln->stats.n_output_bytes += scsi_bufflen(cmnd);
>> + break;
>> + case DMA_FROM_DEVICE:
>> + ioreq->datadir = CSIO_IOREQF_DMA_READ;
>> + csio_inc_stats(ln, n_input_requests);
>> + ln->stats.n_input_bytes += scsi_bufflen(cmnd);
>> + break;
>> + case DMA_NONE:
>> + ioreq->datadir = CSIO_IOREQF_DMA_NONE;
>> + csio_inc_stats(ln, n_control_requests);
>> + break;
>> + default:
>> + CSIO_DB_ASSERT(0);
>> + break;
>> + }
>> +
>> + /* Set cbfn */
>> + ioreq->io_cbfn = csio_scsi_cbfn;
>> +
>> + /* Needed during abort */
>> + cmnd->host_scribble = (unsigned char *)ioreq;
>> + cmnd->scsi_done = done;
>> + cmnd->SCp.Message = 0;
>> +
>> + /* Kick off SCSI IO SM on the ioreq */
>> + spin_lock_irqsave(&hw->lock, flags);
>> + retval = csio_scsi_start_io(ioreq);
>> + spin_unlock_irqrestore(&hw->lock, flags);
>> +
>> + if (retval != CSIO_SUCCESS) {
>> + csio_err(hw, "ioreq: %p couldnt be started, status:%d\n",
>> + ioreq, retval);
>> + csio_inc_stats(scsim, n_busy_error);
>> + goto err_put_req;
>> + }
>> +
>> + return 0;
>> +
>> +err_put_req:
>> + csio_put_scsi_ioreq_lock(hw, scsim, ioreq);
>> +err_dma_unmap:
>> + if (nsge > 0)
>> + scsi_dma_unmap(cmnd);
>> +err:
>> + return rv;
>> +
>> +err_done:
>> + done(cmnd);
>> + return 0;
>> +}
>> +
>> +static DEF_SCSI_QCMD(csio_queuecommand);
>> +
>
> This means that your running with the host_lock held.. I'm not sure if
> that is really what you want to do as it really end's up killing
> multi-lun small packet performance..
>
> How about dropping DEF_SCSI_QCMD usage here, and figure out what
> actually needs to be protected by the SCSI host_lock within
> csio_queuecommand_lck()..?
It is on my TODO list for the next version of the driver, after the
initial submission. Per the current design, we shouldnt need the
host_lock to be held, but I would like to test this change thoroughly
before I submit it.
>> +static csio_retval_t
>> +csio_do_abrt_cls(struct csio_hw *hw, struct csio_ioreq *ioreq, bool abort)
>> +{
>> + csio_retval_t rv;
>> + int cpu = smp_processor_id();
>> + struct csio_lnode *ln = ioreq->lnode;
>> + struct csio_scsi_qset *sqset = &hw->sqset[ln->portid][cpu];
>> +
>> + ioreq->tmo = CSIO_SCSI_ABRT_TMO_MS;
>> + /*
>> + * Use current processor queue for posting the abort/close, but retain
>> + * the ingress queue ID of the original I/O being aborted/closed - we
>> + * need the abort/close completion to be received on the same queue
>> + * as the original I/O.
>> + */
>> + ioreq->eq_idx = sqset->eq_idx;
>> +
>> + if (abort == SCSI_ABORT)
>> + rv = csio_scsi_abort(ioreq);
>> + else /* close */
>
> Point-less comment.
I will remove it.
>
>> + rv = csio_scsi_close(ioreq);
>> +
>> + return rv;
>> +}
>> +
>> +static int
>> +csio_eh_abort_handler(struct scsi_cmnd *cmnd)
>> +{
>> + struct csio_ioreq *ioreq;
>> + struct csio_lnode *ln = shost_priv(cmnd->device->host);
>> + struct csio_hw *hw = csio_lnode_to_hw(ln);
>> + struct csio_scsim *scsim = csio_hw_to_scsim(hw);
>> + int ready = 0, ret;
>> + unsigned long tmo = 0;
>> + csio_retval_t rv;
>> + struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata);
>> +
>> + ret = fc_block_scsi_eh(cmnd);
>> + if (ret)
>> + return ret;
>> +
>> + ioreq = (struct csio_ioreq *)cmnd->host_scribble;
>> + if (!ioreq)
>> + return SUCCESS;
>> +
>> + if (!rn)
>> + return FAILED;
>> +
>> + csio_dbg(hw,
>> + "Request to abort ioreq:%p cmd:%p cdb:%08llx"
>> + " ssni:0x%x lun:%d iq:0x%x\n",
>> + ioreq, cmnd, *((uint64_t *)cmnd->cmnd), rn->flowid,
>> + cmnd->device->lun, csio_q_physiqid(hw, ioreq->iq_idx));
>> +
>> + if (((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) != cmnd) {
>> + csio_inc_stats(scsim, n_abrt_race_comp);
>> + return SUCCESS;
>> + }
>> +
>> + ready = csio_is_lnode_ready(ln);
>> + tmo = CSIO_SCSI_ABRT_TMO_MS;
>> +
>> + spin_lock_irq(&hw->lock);
>> + rv = csio_do_abrt_cls(hw, ioreq, (ready ? SCSI_ABORT : SCSI_CLOSE));
>> + spin_unlock_irq(&hw->lock);
>> +
>> + if (rv != CSIO_SUCCESS) {
>> + if (rv == CSIO_INVAL) {
>> + /* Return success, if abort/close request issued on
>> + * already completed IO
>> + */
>> + return SUCCESS;
>> + }
>> + if (ready)
>> + csio_inc_stats(scsim, n_abrt_busy_error);
>> + else
>> + csio_inc_stats(scsim, n_cls_busy_error);
>> +
>> + goto inval_scmnd;
>> + }
>> +
>> + /* Wait for completion */
>> + init_completion(&ioreq->cmplobj);
>> + wait_for_completion_timeout(&ioreq->cmplobj, msecs_to_jiffies(tmo));
>> +
>> + /* FW didnt respond to abort within our timeout */
>> + if (((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) == cmnd) {
>> +
>> + csio_err(hw, "Abort timed out -- req: %p\n", ioreq);
>> + csio_inc_stats(scsim, n_abrt_timedout);
>> +
>> +inval_scmnd:
>> + if (ioreq->nsge > 0)
>> + scsi_dma_unmap(cmnd);
>> +
>> + spin_lock_irq(&hw->lock);
>> + csio_scsi_cmnd(ioreq) = NULL;
>> + spin_unlock_irq(&hw->lock);
>> +
>> + cmnd->result = (DID_ERROR << 16);
>> + cmnd->scsi_done(cmnd);
>> +
>> + return FAILED;
>> + }
>> +
>> + /* FW successfully aborted the request */
>> + if (host_byte(cmnd->result) == DID_REQUEUE) {
>> + csio_info(hw,
>> + "Aborted SCSI command to (%d:%d) serial#:0x%lx\n",
>> + cmnd->device->id, cmnd->device->lun,
>> + cmnd->serial_number);
>> + return SUCCESS;
>> + } else {
>> + csio_info(hw,
>> + "Failed to abort SCSI command, (%d:%d) serial#:0x%lx\n",
>> + cmnd->device->id, cmnd->device->lun,
>> + cmnd->serial_number);
>> + return FAILED;
>> + }
>> +}
>> +
>
>> +struct scsi_host_template csio_fcoe_shost_template = {
>> + .module = THIS_MODULE,
>> + .name = CSIO_DRV_DESC,
>> + .proc_name = KBUILD_MODNAME,
>> + .queuecommand = csio_queuecommand,
>> + .eh_abort_handler = csio_eh_abort_handler,
>> + .eh_device_reset_handler = csio_eh_lun_reset_handler,
>> + .slave_alloc = csio_slave_alloc,
>> + .slave_configure = csio_slave_configure,
>> + .slave_destroy = csio_slave_destroy,
>> + .scan_finished = csio_scan_finished,
>> + .this_id = -1,
>> + .sg_tablesize = CSIO_SCSI_MAX_SGE,
>> + .cmd_per_lun = CSIO_MAX_CMD_PER_LUN,
>> + .use_clustering = ENABLE_CLUSTERING,
>> + .shost_attrs = csio_fcoe_lport_attrs,
>> + .max_sectors = CSIO_MAX_SECTOR_SIZE,
>> +};
>> +
>> +struct scsi_host_template csio_fcoe_shost_vport_template = {
>> + .module = THIS_MODULE,
>> + .name = CSIO_DRV_DESC,
>> + .proc_name = KBUILD_MODNAME,
>> + .queuecommand = csio_queuecommand,
>> + .eh_abort_handler = csio_eh_abort_handler,
>> + .eh_device_reset_handler = csio_eh_lun_reset_handler,
>> + .slave_alloc = csio_slave_alloc,
>> + .slave_configure = csio_slave_configure,
>> + .slave_destroy = csio_slave_destroy,
>> + .scan_finished = csio_scan_finished,
>> + .this_id = -1,
>> + .sg_tablesize = CSIO_SCSI_MAX_SGE,
>> + .cmd_per_lun = CSIO_MAX_CMD_PER_LUN,
>> + .use_clustering = ENABLE_CLUSTERING,
>> + .shost_attrs = csio_fcoe_vport_attrs,
>> + .max_sectors = CSIO_MAX_SECTOR_SIZE,
>> +};
>> +
>> +/*
>> + * csio_scsi_alloc_ddp_bufs - Allocate buffers for DDP of unaligned SGLs.
>> + * @scm: SCSI Module
>> + * @hw: HW device.
>> + * @buf_size: buffer size
>> + * @num_buf : Number of buffers.
>> + *
>> + * This routine allocates DMA buffers required for SCSI Data xfer, if
>> + * each SGL buffer for a SCSI Read request posted by SCSI midlayer are
>> + * not virtually contiguous.
>> + */
>> +static csio_retval_t
>> +csio_scsi_alloc_ddp_bufs(struct csio_scsim *scm, struct csio_hw *hw,
>> + int buf_size, int num_buf)
>> +{
>> + int n = 0;
>> + struct list_head *tmp;
>> + struct csio_dma_buf *ddp_desc = NULL;
>> + uint32_t unit_size = 0;
>> +
>> + if (!num_buf)
>> + return CSIO_SUCCESS;
>
> Just return 0..?
Since there is a comment about driver-internal return values in your
review of patch 6, I would like to take up this discussion in that thread.
>
>> +
>> + if (!buf_size)
>> + return CSIO_INVAL;
>
> Just return -EINVAL..?
>
>> +
>> + INIT_LIST_HEAD(&scm->ddp_freelist);
>> +
>> + /* Align buf size to page size */
>> + buf_size = (buf_size + PAGE_SIZE - 1) & PAGE_MASK;
>> + /* Initialize dma descriptors */
>> + for (n = 0; n < num_buf; n++) {
>> + /* Set unit size to request size */
>> + unit_size = buf_size;
>> + ddp_desc = kzalloc(sizeof(struct csio_dma_buf), GFP_KERNEL);
>> + if (!ddp_desc) {
>> + csio_err(hw,
>> + "Failed to allocate ddp descriptors,"
>> + " Num allocated = %d.\n",
>> + scm->stats.n_free_ddp);
>> + goto no_mem;
>> + }
>> +
>> + /* Allocate Dma buffers for DDP */
>> + ddp_desc->vaddr = pci_alloc_consistent(hw->pdev, unit_size,
>> + &ddp_desc->paddr);
>> + if (!ddp_desc->vaddr) {
>> + csio_err(hw,
>> + "SCSI response DMA buffer (ddp) allocation"
>> + " failed!\n");
>> + kfree(ddp_desc);
>> + goto no_mem;
>> + }
>> +
>> + ddp_desc->len = unit_size;
>> +
>> + /* Added it to scsi ddp freelist */
>> + list_add_tail(&ddp_desc->list, &scm->ddp_freelist);
>> + csio_inc_stats(scm, n_free_ddp);
>> + }
>> +
>> + return CSIO_SUCCESS;
>
> Just return 0..?
>
>> +no_mem:
>> + /* release dma descs back to freelist and free dma memory */
>> + list_for_each(tmp, &scm->ddp_freelist) {
>> + ddp_desc = (struct csio_dma_buf *) tmp;
>> + tmp = csio_list_prev(tmp);
>> + pci_free_consistent(hw->pdev, ddp_desc->len, ddp_desc->vaddr,
>> + ddp_desc->paddr);
>> + list_del_init(&ddp_desc->list);
>> + kfree(ddp_desc);
>> + }
>> + scm->stats.n_free_ddp = 0;
>> +
>> + return CSIO_NOMEM;
>
> This should be just -ENOMEM..?
>
>> +}
>> +
>> +/*
>> + * csio_scsi_free_ddp_bufs - free DDP buffers of unaligned SGLs.
>> + * @scm: SCSI Module
>> + * @hw: HW device.
>> + *
>> + * This routine frees ddp buffers.
>> + */
>> +static csio_retval_t
>> +csio_scsi_free_ddp_bufs(struct csio_scsim *scm, struct csio_hw *hw)
>> +{
>> + struct list_head *tmp;
>> + struct csio_dma_buf *ddp_desc;
>> +
>> + /* release dma descs back to freelist and free dma memory */
>> + list_for_each(tmp, &scm->ddp_freelist) {
>> + ddp_desc = (struct csio_dma_buf *) tmp;
>> + tmp = csio_list_prev(tmp);
>> + pci_free_consistent(hw->pdev, ddp_desc->len, ddp_desc->vaddr,
>> + ddp_desc->paddr);
>> + list_del_init(&ddp_desc->list);
>> + kfree(ddp_desc);
>> + }
>> + scm->stats.n_free_ddp = 0;
>> +
>> + return CSIO_NOMEM;
>> +}
>
> Ditto.. Just -ENOMEM..?
>
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists