| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL8zT=gDipNepDTvL8XEHjvMO8s09pk8yB7PJOCNqp3XSvVD4w@mail.gmail.com> Date: Thu, 27 Sep 2012 14:51:55 +0200 From: Jean-Michel Hautbois <jhautbois@...il.com> To: Dmitry Kravkov <dmitry@...adcom.com> Cc: netdev <netdev@...r.kernel.org>, Barak Witkowski <barak@...adcom.com>, Eilon Greenstein <eilong@...adcom.com>, "davem@...emloft.net" <davem@...emloft.net> Subject: Re: bnx2x: link detected up at startup even when it should be down 2012/9/27 Dmitry Kravkov <dmitry@...adcom.com>: > On Thu, 2012-09-27 at 12:07 +0200, Jean-Michel Hautbois wrote: >> 2012/9/27 Dmitry Kravkov <dmitry@...adcom.com>: >> > On Tue, 2012-09-25 at 16:00 +0200, Jean-Michel Hautbois wrote: >> >> 2012/9/25 Jean-Michel Hautbois <jhautbois@...il.com>: >> >> > 2012/9/25 Dmitry Kravkov <dmitry@...adcom.com>: >> >> >>> -----Original Message----- >> >> >>> From: Jean-Michel Hautbois [mailto:jhautbois@...il.com] >> >> >>> Sent: Tuesday, September 25, 2012 2:54 PM >> >> >>> To: Dmitry Kravkov >> >> >>> Cc: netdev; Barak Witkowski; Eilon Greenstein; davem@...emloft.net >> >> >>> Subject: Re: bnx2x: link detected up at startup even when it should be down >> >> >> >> >> >> >> >> FYI, eth4 and eth5 are seen UP and they should be down. >> > It looks driver misses DCC "disable/enable" update >> > >> > Can you pls test this simple patch? >> > >> > From 1efa0314f4b912f474089f5f8375d37bc265a502 Mon Sep 17 00:00:00 2001 >> > From: Dmitry Kravkov <dmitry@...adcom.com> >> > Date: Fri, 22 Mar 2013 05:12:02 +0200 >> > Subject: [PATCH] bnx2x: DCC disable/enable update can be missed by driver >> > >> > As a result of missed update, OS may be updated with wrong link status. >> > --- >> > drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 1 + >> > 1 files changed, 1 insertions(+), 0 deletions(-) >> > >> > diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c >> > index 2f6361e..3962d57 100644 >> > --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c >> > +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c >> > @@ -3445,6 +3445,7 @@ static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn) >> > int func = BP_FUNC(bp); >> > >> > REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); >> > + bnx2x_read_mf_cfg(bp); >> > bp->mf_config[BP_VN(bp)] = MF_CFG_RD(bp, >> > func_mf_config[BP_ABS_FUNC(bp)].config); >> > val = SHMEM_RD(bp, >> > -- >> > 1.7.1 >> > >> > >> > >> >> JM >> >> >> >> This patch does not work (no change at all). >> > > Since bnx2x.debug didn't work for you, Let's try to force some debug > messages from inside the driver: > OK, nice workaround but maybe could we also try to make bnx2x.debug work ;). Most importantly, here are the logs for eth4 only (which I know is not working, and then all the cards (at the end of this e-mail). Sep 27 12:49:51 debian kernel: [ 19.421184] bnx2x 0000:04:00.4: eth4: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem e4000000, IRQ 37, node addr 80:c1:6e:7a:49:4a Sep 27 12:50:20 debian kernel: [ 58.796653] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.068463] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.325567] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.568618] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 107.792132] bnx2x: [bnx2x_fw_command:2618(eth4)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 107.813780] bnx2x: [bnx2x_fw_command:2630(eth4)][after 20 ms] read (10120001) seq is (1) from FW MB Sep 27 12:51:09 debian kernel: [ 107.813961] bnx2x: [bnx2x_nic_load:1815(eth4)]pmf 0 Sep 27 12:51:09 debian kernel: [ 107.817115] bnx2x: [bnx2x_init_hw_func:6527(eth4)]starting func init func 4 Sep 27 12:51:09 debian kernel: [ 107.938867] bnx2x: [bnx2x_phy_probe:11586(eth4)]Begin phy probe Sep 27 12:51:09 debian kernel: [ 107.938868] bnx2x: [bnx2x_phy_probe:11602(eth4)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:09 debian kernel: [ 107.938871] bnx2x: [bnx2x_populate_int_phy:11230(eth4)]:chip_id = 0x168e0000 Sep 27 12:51:09 debian kernel: [ 107.938875] bnx2x: [bnx2x_populate_int_phy:11342(eth4)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:09 debian kernel: [ 107.938881] bnx2x: [bnx2x_phy_def_cfg:11499(eth4)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:51:09 debian kernel: [ 107.938883] bnx2x: [bnx2x_phy_probe:11602(eth4)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:09 debian kernel: [ 107.938885] bnx2x: [bnx2x_phy_probe:11643(eth4)]End phy probe. #phys found 1 Sep 27 12:51:09 debian kernel: [ 107.938916] bnx2x 0000:04:00.4: eth4: using MSI-X IRQs: sp 98 fp[0] 99 ... fp[0] 99 Sep 27 12:51:09 debian kernel: [ 107.938925] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth4)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:09 debian kernel: [ 107.941678] bnx2x: [bnx2x_fw_command:2618(eth4)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 107.952686] bnx2x: [bnx2x_fw_command:2630(eth4)][after 10 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:09 debian kernel: [ 107.957898] bnx2x: [set_phy_vars:3478(eth4)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:09 debian kernel: [ 107.958078] bnx2x: [bnx2x_link_status_update:4481(eth4)]phy link up Sep 27 12:51:09 debian kernel: [ 107.958198] bnx2x: [bnx2x_link_status_update:4590(eth4)]media_types = 0xf0 Sep 27 12:51:09 debian kernel: [ 107.958319] bnx2x: [bnx2x_link_status_update:4608(eth4)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:09 debian kernel: [ 107.958503] bnx2x: [bnx2x_link_status_update:4610(eth4)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:09 debian kernel: [ 107.958696] bnx2x 0000:04:00.4: eth4: NIC Link is Up, 2500 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:09 debian kernel: [ 107.959748] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 107.960223] bonding: bond4: enslaving eth4 as a backup interface with an up link. Sep 27 12:51:09 debian kernel: [ 107.966818] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 108.140040] bonding: bond4: making interface eth4 the new active one 100 ms earlier. Sep 27 12:51:09 debian kernel: [ 108.145759] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.405175] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Maybe this line can explain more ? Sep 27 12:51:09 debian kernel: [ 107.938925] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth4)]ERROR: Invalid cfg pin 0 for module detect indication All the cards : ep 27 12:49:51 debian kernel: [ 0.000000] Command line: initrd=initrd_Diskless_full.img rw root=/dev/ram0 ip=dhcp bnx2x.poll=1 bnx2x.debug=4 BOOT_IMAGE=vmlinuz BOOTIF=01-80-c1-6e-7a-49-48 Sep 27 12:49:51 debian kernel: [ 0.000000] Kernel command line: initrd=initrd_Diskless_full.img rw root=/dev/ram0 ip=dhcp bnx2x.poll=1 bnx2x.debug=4 BOOT_IMAGE=vmlinuz BOOTIF=01-80-c1-6e-7a-49-48 Sep 27 12:49:51 debian kernel: [ 19.411379] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.30-1 (2012/08/17) Sep 27 12:49:51 debian kernel: [ 19.411658] bnx2x 0000:04:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 Sep 27 12:49:51 debian kernel: [ 19.412616] bnx2x 0000:04:00.0: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.412618] bnx2x 0000:04:00.0: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.412620] bnx2x 0000:04:00.0: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.412624] bnx2x 0000:04:00.0: shmem offset 0x3c6c80 shmem2 offset 0x3c3ec4 Sep 27 12:49:51 debian kernel: [ 19.412626] bnx2x 0000:04:00.0: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.412628] bnx2x 0000:04:00.0: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.412630] bnx2x 0000:04:00.0: WoL capable Sep 27 12:49:51 debian kernel: [ 19.412634] bnx2x 0000:04:00.0: part number 394D4342-31383735-31543030-47303030 Sep 27 12:49:51 debian kernel: [ 19.412637] bnx2x 0000:04:00.0: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.412724] bnx2x 0000:04:00.0: igu_dsb_id 0 igu_base_sb 1 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.412727] bnx2x 0000:04:00.0: shmem2base 0x3c3ec4, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.412731] bnx2x 0000:04:00.0: multi function mode Sep 27 12:49:51 debian kernel: [ 19.412733] bnx2x 0000:04:00.0: MF OV for func 0 is 1000 (0x03e8) Sep 27 12:49:51 debian kernel: [ 19.412739] bnx2x 0000:04:00.0: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x01000000 Sep 27 12:49:51 debian kernel: [ 19.412741] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.412742] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.412745] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.412748] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.412754] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.412756] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.412758] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.412760] bnx2x 0000:04:00.0: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.412761] bnx2x 0000:04:00.0: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.412762] bnx2x 0000:04:00.0: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.412766] bnx2x 0000:04:00.0: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.413182] bnx2x 0000:04:00.0: fw_seq 0x00000005 Sep 27 12:49:51 debian kernel: [ 19.413184] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.413550] bnx2x 0000:04:00.0: eth0: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem ea000000, IRQ 32, node addr 80:c1:6e:7a:49:48 Sep 27 12:49:51 debian kernel: [ 19.413584] bnx2x 0000:04:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36 Sep 27 12:49:51 debian kernel: [ 19.414752] bnx2x 0000:04:00.1: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.414753] bnx2x 0000:04:00.1: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.414755] bnx2x 0000:04:00.1: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.414758] bnx2x 0000:04:00.1: shmem offset 0x3c7640 shmem2 offset 0x3c3fd8 Sep 27 12:49:51 debian kernel: [ 19.414760] bnx2x 0000:04:00.1: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.414762] bnx2x 0000:04:00.1: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.414764] bnx2x 0000:04:00.1: WoL capable Sep 27 12:49:51 debian kernel: [ 19.414768] bnx2x 0000:04:00.1: part number 394D4342-31383735-31543030-47303030 Sep 27 12:49:51 debian kernel: [ 19.414771] bnx2x 0000:04:00.1: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.414858] bnx2x 0000:04:00.1: igu_dsb_id 0 igu_base_sb 1 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.414861] bnx2x 0000:04:00.1: shmem2base 0x3c3fd8, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.414865] bnx2x 0000:04:00.1: multi function mode Sep 27 12:49:51 debian kernel: [ 19.414867] bnx2x 0000:04:00.1: MF OV for func 1 is 1000 (0x03e8) Sep 27 12:49:51 debian kernel: [ 19.414873] bnx2x 0000:04:00.1: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x01000000 Sep 27 12:49:51 debian kernel: [ 19.414874] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.414875] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.414878] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.414881] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.414887] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.414889] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.414891] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.414893] bnx2x 0000:04:00.1: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.414894] bnx2x 0000:04:00.1: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.414895] bnx2x 0000:04:00.1: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.414899] bnx2x 0000:04:00.1: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.415314] bnx2x 0000:04:00.1: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.415316] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.415642] bnx2x 0000:04:00.1: eth1: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem e8800000, IRQ 36, node addr 80:c1:6e:7a:49:4c Sep 27 12:49:51 debian kernel: [ 19.415674] bnx2x 0000:04:00.2: PCI INT B -> GSI 36 (level, low) -> IRQ 36 Sep 27 12:49:51 debian kernel: [ 19.416602] bnx2x 0000:04:00.2: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.416603] bnx2x 0000:04:00.2: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.416605] bnx2x 0000:04:00.2: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.416608] bnx2x 0000:04:00.2: shmem offset 0x3c6c80 shmem2 offset 0x3c3ec4 Sep 27 12:49:51 debian kernel: [ 19.416610] bnx2x 0000:04:00.2: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.416613] bnx2x 0000:04:00.2: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.416614] bnx2x 0000:04:00.2: WoL capable Sep 27 12:49:51 debian kernel: [ 19.416618] bnx2x 0000:04:00.2: part number 394D4342-31383735-31543030-47303030 Sep 27 12:49:51 debian kernel: [ 19.416621] bnx2x 0000:04:00.2: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.416709] bnx2x 0000:04:00.2: igu_dsb_id 17 igu_base_sb 18 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.416711] bnx2x 0000:04:00.2: shmem2base 0x3c3ec4, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.416716] bnx2x 0000:04:00.2: multi function mode Sep 27 12:49:51 debian kernel: [ 19.416718] bnx2x 0000:04:00.2: MF OV for func 2 is 1001 (0x03e9) Sep 27 12:49:51 debian kernel: [ 19.416723] bnx2x 0000:04:00.2: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x01000000 Sep 27 12:49:51 debian kernel: [ 19.416725] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.416726] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.416728] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.416732] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.416738] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.416739] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.416741] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.416743] bnx2x 0000:04:00.2: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.416744] bnx2x 0000:04:00.2: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.416745] bnx2x 0000:04:00.2: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.416749] bnx2x 0000:04:00.2: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.417165] bnx2x 0000:04:00.2: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.417167] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.417491] bnx2x 0000:04:00.2: eth2: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem e7000000, IRQ 36, node addr 80:c1:6e:7a:49:49 Sep 27 12:49:51 debian kernel: [ 19.417525] bnx2x 0000:04:00.3: PCI INT C -> GSI 37 (level, low) -> IRQ 37 Sep 27 12:49:51 debian kernel: [ 19.418453] bnx2x 0000:04:00.3: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.418454] bnx2x 0000:04:00.3: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.418456] bnx2x 0000:04:00.3: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.418459] bnx2x 0000:04:00.3: shmem offset 0x3c7640 shmem2 offset 0x3c3fd8 Sep 27 12:49:51 debian kernel: [ 19.418461] bnx2x 0000:04:00.3: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.418463] bnx2x 0000:04:00.3: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.418465] bnx2x 0000:04:00.3: WoL capable Sep 27 12:49:51 debian kernel: [ 19.418468] bnx2x 0000:04:00.3: part number 394D4342-31383735-31543030-47303030 Sep 27 12:49:51 debian kernel: [ 19.418471] bnx2x 0000:04:00.3: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.418559] bnx2x 0000:04:00.3: igu_dsb_id 17 igu_base_sb 18 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.418562] bnx2x 0000:04:00.3: shmem2base 0x3c3fd8, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.418566] bnx2x 0000:04:00.3: multi function mode Sep 27 12:49:51 debian kernel: [ 19.418568] bnx2x 0000:04:00.3: MF OV for func 3 is 1001 (0x03e9) Sep 27 12:49:51 debian kernel: [ 19.418573] bnx2x 0000:04:00.3: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x01000000 Sep 27 12:49:51 debian kernel: [ 19.418575] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.418576] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.418579] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.418582] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.418588] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.418590] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.418592] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.418594] bnx2x 0000:04:00.3: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.418595] bnx2x 0000:04:00.3: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.418596] bnx2x 0000:04:00.3: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.418600] bnx2x 0000:04:00.3: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.419015] bnx2x 0000:04:00.3: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.419017] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.419343] bnx2x 0000:04:00.3: eth3: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem e5800000, IRQ 37, node addr 80:c1:6e:7a:49:4d Sep 27 12:49:51 debian kernel: [ 19.419373] bnx2x 0000:04:00.4: PCI INT C -> GSI 37 (level, low) -> IRQ 37 Sep 27 12:49:51 debian kernel: [ 19.420302] bnx2x 0000:04:00.4: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.420303] bnx2x 0000:04:00.4: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.420305] bnx2x 0000:04:00.4: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.420309] bnx2x 0000:04:00.4: shmem offset 0x3c6c80 shmem2 offset 0x3c3ec4 Sep 27 12:49:51 debian kernel: [ 19.420310] bnx2x 0000:04:00.4: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.420313] bnx2x 0000:04:00.4: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.420314] bnx2x 0000:04:00.4: WoL capable Sep 27 12:49:51 debian kernel: [ 19.420318] bnx2x 0000:04:00.4: part number 394D4342-31383735-31543030-47303030 Sep 27 12:49:51 debian kernel: [ 19.420321] bnx2x 0000:04:00.4: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.420409] bnx2x 0000:04:00.4: igu_dsb_id 34 igu_base_sb 35 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.420411] bnx2x 0000:04:00.4: shmem2base 0x3c3ec4, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.420415] bnx2x 0000:04:00.4: multi function mode Sep 27 12:49:51 debian kernel: [ 19.420417] bnx2x 0000:04:00.4: MF OV for func 4 is 1002 (0x03ea) Sep 27 12:49:51 debian kernel: [ 19.420423] bnx2x 0000:04:00.4: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x01000000 Sep 27 12:49:51 debian kernel: [ 19.420424] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.420425] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.420428] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.420431] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.420437] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.420439] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.420441] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.420442] bnx2x 0000:04:00.4: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.420444] bnx2x 0000:04:00.4: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.420445] bnx2x 0000:04:00.4: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.420449] bnx2x 0000:04:00.4: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.420864] bnx2x 0000:04:00.4: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.420866] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.421184] bnx2x 0000:04:00.4: eth4: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem e4000000, IRQ 37, node addr 80:c1:6e:7a:49:4a Sep 27 12:49:51 debian kernel: [ 19.421218] bnx2x 0000:04:00.5: PCI INT D -> GSI 38 (level, low) -> IRQ 38 Sep 27 12:49:51 debian kernel: [ 19.422145] bnx2x 0000:04:00.5: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.422147] bnx2x 0000:04:00.5: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.422149] bnx2x 0000:04:00.5: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.422152] bnx2x 0000:04:00.5: shmem offset 0x3c7640 shmem2 offset 0x3c3fd8 Sep 27 12:49:51 debian kernel: [ 19.422154] bnx2x 0000:04:00.5: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.422156] bnx2x 0000:04:00.5: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.422158] bnx2x 0000:04:00.5: WoL capable Sep 27 12:49:51 debian kernel: [ 19.422162] bnx2x 0000:04:00.5: part number 394D4342-31383735-31543030-47303030 Sep 27 12:49:51 debian kernel: [ 19.422165] bnx2x 0000:04:00.5: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.422252] bnx2x 0000:04:00.5: igu_dsb_id 34 igu_base_sb 35 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.422255] bnx2x 0000:04:00.5: shmem2base 0x3c3fd8, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.422259] bnx2x 0000:04:00.5: multi function mode Sep 27 12:49:51 debian kernel: [ 19.422261] bnx2x 0000:04:00.5: MF OV for func 5 is 1002 (0x03ea) Sep 27 12:49:51 debian kernel: [ 19.422266] bnx2x 0000:04:00.5: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x01000000 Sep 27 12:49:51 debian kernel: [ 19.422268] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.422269] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.422274] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.422277] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.422283] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.422285] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.422287] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.422289] bnx2x 0000:04:00.5: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.422289] bnx2x 0000:04:00.5: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.422291] bnx2x 0000:04:00.5: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.422295] bnx2x 0000:04:00.5: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.422710] bnx2x 0000:04:00.5: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.422711] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.423036] bnx2x 0000:04:00.5: eth5: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem e2800000, IRQ 38, node addr 80:c1:6e:7a:49:4e Sep 27 12:49:51 debian kernel: [ 19.423060] bnx2x 0000:04:00.6: PCI INT D -> GSI 38 (level, low) -> IRQ 38 Sep 27 12:49:51 debian kernel: [ 19.423988] bnx2x 0000:04:00.6: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.423989] bnx2x 0000:04:00.6: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.423991] bnx2x 0000:04:00.6: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.423994] bnx2x 0000:04:00.6: shmem offset 0x3c6c80 shmem2 offset 0x3c3ec4 Sep 27 12:49:51 debian kernel: [ 19.423996] bnx2x 0000:04:00.6: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.423998] bnx2x 0000:04:00.6: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.424000] bnx2x 0000:04:00.6: WoL capable Sep 27 12:49:51 debian kernel: [ 19.424004] bnx2x 0000:04:00.6: part number 394D4342-31383735-31543030-47303030 Sep 27 12:49:51 debian kernel: [ 19.424007] bnx2x 0000:04:00.6: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.424095] bnx2x 0000:04:00.6: igu_dsb_id 51 igu_base_sb 52 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.424097] bnx2x 0000:04:00.6: shmem2base 0x3c3ec4, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.424102] bnx2x 0000:04:00.6: multi function mode Sep 27 12:49:51 debian kernel: [ 19.424103] bnx2x 0000:04:00.6: MF OV for func 6 is 1003 (0x03eb) Sep 27 12:49:51 debian kernel: [ 19.424109] bnx2x 0000:04:00.6: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x01000000 Sep 27 12:49:51 debian kernel: [ 19.424110] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.424112] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.424114] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.424117] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.424124] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.424125] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.424127] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.424129] bnx2x 0000:04:00.6: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.424130] bnx2x 0000:04:00.6: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.424131] bnx2x 0000:04:00.6: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.424135] bnx2x 0000:04:00.6: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.424551] bnx2x 0000:04:00.6: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.424552] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.424899] bnx2x 0000:04:00.6: eth6: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem e1000000, IRQ 38, node addr 80:c1:6e:7a:49:4b Sep 27 12:49:51 debian kernel: [ 19.424927] bnx2x 0000:04:00.7: PCI INT A -> GSI 32 (level, low) -> IRQ 32 Sep 27 12:49:51 debian kernel: [ 19.425856] bnx2x 0000:04:00.7: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.425857] bnx2x 0000:04:00.7: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.425859] bnx2x 0000:04:00.7: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.425863] bnx2x 0000:04:00.7: shmem offset 0x3c7640 shmem2 offset 0x3c3fd8 Sep 27 12:49:51 debian kernel: [ 19.425864] bnx2x 0000:04:00.7: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.425867] bnx2x 0000:04:00.7: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.425868] bnx2x 0000:04:00.7: WoL capable Sep 27 12:49:51 debian kernel: [ 19.425872] bnx2x 0000:04:00.7: part number 394D4342-31383735-31543030-47303030 Sep 27 12:49:51 debian kernel: [ 19.425875] bnx2x 0000:04:00.7: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.425963] bnx2x 0000:04:00.7: igu_dsb_id 51 igu_base_sb 52 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.425965] bnx2x 0000:04:00.7: shmem2base 0x3c3fd8, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.425969] bnx2x 0000:04:00.7: multi function mode Sep 27 12:49:51 debian kernel: [ 19.425971] bnx2x 0000:04:00.7: MF OV for func 7 is 1003 (0x03eb) Sep 27 12:49:51 debian kernel: [ 19.425977] bnx2x 0000:04:00.7: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x01000000 Sep 27 12:49:51 debian kernel: [ 19.425978] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.425980] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.425982] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.425985] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.425992] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.425993] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.425995] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.425997] bnx2x 0000:04:00.7: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.425998] bnx2x 0000:04:00.7: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.425999] bnx2x 0000:04:00.7: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.426003] bnx2x 0000:04:00.7: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.426418] bnx2x 0000:04:00.7: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.426419] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.426745] bnx2x 0000:04:00.7: eth7: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem df800000, IRQ 32, node addr 80:c1:6e:7a:49:4f Sep 27 12:49:51 debian kernel: [ 19.426780] bnx2x 0000:05:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 Sep 27 12:49:51 debian kernel: [ 19.427710] bnx2x 0000:05:00.0: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.427711] bnx2x 0000:05:00.0: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.427713] bnx2x 0000:05:00.0: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.427716] bnx2x 0000:05:00.0: shmem offset 0x3c6c80 shmem2 offset 0x3c3ec4 Sep 27 12:49:51 debian kernel: [ 19.427718] bnx2x 0000:05:00.0: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.427720] bnx2x 0000:05:00.0: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.427722] bnx2x 0000:05:00.0: WoL capable Sep 27 12:49:51 debian kernel: [ 19.427725] bnx2x 0000:05:00.0: part number 0-0-0-0 Sep 27 12:49:51 debian kernel: [ 19.427729] bnx2x 0000:05:00.0: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.427817] bnx2x 0000:05:00.0: igu_dsb_id 0 igu_base_sb 1 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.427819] bnx2x 0000:05:00.0: shmem2base 0x3c3ec4, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.427824] bnx2x 0000:05:00.0: multi function mode Sep 27 12:49:51 debian kernel: [ 19.427825] bnx2x 0000:05:00.0: MF OV for func 0 is 1000 (0x03e8) Sep 27 12:49:51 debian kernel: [ 19.427831] bnx2x 0000:05:00.0: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.427833] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.427834] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.427837] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.427840] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.427846] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.427848] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.427849] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.427851] bnx2x 0000:05:00.0: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.427852] bnx2x 0000:05:00.0: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.427853] bnx2x 0000:05:00.0: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.427857] bnx2x 0000:05:00.0: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.446403] bnx2x 0000:05:00.0: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.446404] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.446726] bnx2x 0000:05:00.0: eth8: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem f6000000, IRQ 40, node addr 2c:76:8a:59:b3:90 Sep 27 12:49:51 debian kernel: [ 19.446760] bnx2x 0000:05:00.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44 Sep 27 12:49:51 debian kernel: [ 19.447688] bnx2x 0000:05:00.1: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.447689] bnx2x 0000:05:00.1: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.447692] bnx2x 0000:05:00.1: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.447695] bnx2x 0000:05:00.1: shmem offset 0x3c7640 shmem2 offset 0x3c3fd8 Sep 27 12:49:51 debian kernel: [ 19.447697] bnx2x 0000:05:00.1: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.447699] bnx2x 0000:05:00.1: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.447700] bnx2x 0000:05:00.1: WoL capable Sep 27 12:49:51 debian kernel: [ 19.447704] bnx2x 0000:05:00.1: part number 0-0-0-0 Sep 27 12:49:51 debian kernel: [ 19.447707] bnx2x 0000:05:00.1: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.447795] bnx2x 0000:05:00.1: igu_dsb_id 0 igu_base_sb 1 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.447798] bnx2x 0000:05:00.1: shmem2base 0x3c3fd8, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.447802] bnx2x 0000:05:00.1: multi function mode Sep 27 12:49:51 debian kernel: [ 19.447804] bnx2x 0000:05:00.1: MF OV for func 1 is 1000 (0x03e8) Sep 27 12:49:51 debian kernel: [ 19.447809] bnx2x 0000:05:00.1: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.447811] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.447812] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.447815] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.447818] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.447824] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.447826] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.447828] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.447829] bnx2x 0000:05:00.1: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.447830] bnx2x 0000:05:00.1: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.447831] bnx2x 0000:05:00.1: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.447835] bnx2x 0000:05:00.1: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.448251] bnx2x 0000:05:00.1: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.448252] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.448577] bnx2x 0000:05:00.1: eth9: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem f4800000, IRQ 44, node addr 2c:76:8a:59:b3:94 Sep 27 12:49:51 debian kernel: [ 19.448602] bnx2x 0000:05:00.2: PCI INT B -> GSI 44 (level, low) -> IRQ 44 Sep 27 12:49:51 debian kernel: [ 19.449532] bnx2x 0000:05:00.2: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.449533] bnx2x 0000:05:00.2: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.449535] bnx2x 0000:05:00.2: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.449538] bnx2x 0000:05:00.2: shmem offset 0x3c6c80 shmem2 offset 0x3c3ec4 Sep 27 12:49:51 debian kernel: [ 19.449540] bnx2x 0000:05:00.2: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.449542] bnx2x 0000:05:00.2: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.449544] bnx2x 0000:05:00.2: WoL capable Sep 27 12:49:51 debian kernel: [ 19.449547] bnx2x 0000:05:00.2: part number 0-0-0-0 Sep 27 12:49:51 debian kernel: [ 19.449550] bnx2x 0000:05:00.2: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.449639] bnx2x 0000:05:00.2: igu_dsb_id 17 igu_base_sb 18 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.449641] bnx2x 0000:05:00.2: shmem2base 0x3c3ec4, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.449646] bnx2x 0000:05:00.2: multi function mode Sep 27 12:49:51 debian kernel: [ 19.449648] bnx2x 0000:05:00.2: MF OV for func 2 is 1001 (0x03e9) Sep 27 12:49:51 debian kernel: [ 19.449654] bnx2x 0000:05:00.2: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.449655] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.449656] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.449659] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.449662] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.449669] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.449670] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.449672] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.449674] bnx2x 0000:05:00.2: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.449675] bnx2x 0000:05:00.2: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.449676] bnx2x 0000:05:00.2: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.449680] bnx2x 0000:05:00.2: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.450096] bnx2x 0000:05:00.2: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.450097] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.450427] bnx2x 0000:05:00.2: eth10: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem f3000000, IRQ 44, node addr 2c:76:8a:59:b3:91 Sep 27 12:49:51 debian kernel: [ 19.450452] bnx2x 0000:05:00.3: PCI INT C -> GSI 45 (level, low) -> IRQ 45 Sep 27 12:49:51 debian kernel: [ 19.451381] bnx2x 0000:05:00.3: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.451382] bnx2x 0000:05:00.3: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.451384] bnx2x 0000:05:00.3: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.451387] bnx2x 0000:05:00.3: shmem offset 0x3c7640 shmem2 offset 0x3c3fd8 Sep 27 12:49:51 debian kernel: [ 19.451389] bnx2x 0000:05:00.3: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.451391] bnx2x 0000:05:00.3: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.451393] bnx2x 0000:05:00.3: WoL capable Sep 27 12:49:51 debian kernel: [ 19.451396] bnx2x 0000:05:00.3: part number 0-0-0-0 Sep 27 12:49:51 debian kernel: [ 19.451399] bnx2x 0000:05:00.3: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.451487] bnx2x 0000:05:00.3: igu_dsb_id 17 igu_base_sb 18 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.451489] bnx2x 0000:05:00.3: shmem2base 0x3c3fd8, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.451494] bnx2x 0000:05:00.3: multi function mode Sep 27 12:49:51 debian kernel: [ 19.451495] bnx2x 0000:05:00.3: MF OV for func 3 is 1001 (0x03e9) Sep 27 12:49:51 debian kernel: [ 19.451501] bnx2x 0000:05:00.3: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.451502] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.451504] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.451507] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.451510] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.451516] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.451518] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.451520] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.451521] bnx2x 0000:05:00.3: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.451522] bnx2x 0000:05:00.3: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.451524] bnx2x 0000:05:00.3: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.451528] bnx2x 0000:05:00.3: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.451943] bnx2x 0000:05:00.3: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.451945] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.452277] bnx2x 0000:05:00.3: eth11: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem f1800000, IRQ 45, node addr 2c:76:8a:59:b3:95 Sep 27 12:49:51 debian kernel: [ 19.452303] bnx2x 0000:05:00.4: PCI INT C -> GSI 45 (level, low) -> IRQ 45 Sep 27 12:49:51 debian kernel: [ 19.453228] bnx2x 0000:05:00.4: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.453229] bnx2x 0000:05:00.4: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.453232] bnx2x 0000:05:00.4: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.453235] bnx2x 0000:05:00.4: shmem offset 0x3c6c80 shmem2 offset 0x3c3ec4 Sep 27 12:49:51 debian kernel: [ 19.453237] bnx2x 0000:05:00.4: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.453239] bnx2x 0000:05:00.4: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.453241] bnx2x 0000:05:00.4: WoL capable Sep 27 12:49:51 debian kernel: [ 19.453244] bnx2x 0000:05:00.4: part number 0-0-0-0 Sep 27 12:49:51 debian kernel: [ 19.453247] bnx2x 0000:05:00.4: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.453338] bnx2x 0000:05:00.4: igu_dsb_id 34 igu_base_sb 35 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.453341] bnx2x 0000:05:00.4: shmem2base 0x3c3ec4, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.453345] bnx2x 0000:05:00.4: multi function mode Sep 27 12:49:51 debian kernel: [ 19.453347] bnx2x 0000:05:00.4: MF OV for func 4 is 1002 (0x03ea) Sep 27 12:49:51 debian kernel: [ 19.453353] bnx2x 0000:05:00.4: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.453354] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.453356] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.453358] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.453362] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.453368] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.453369] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.453371] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.453373] bnx2x 0000:05:00.4: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.453374] bnx2x 0000:05:00.4: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.453375] bnx2x 0000:05:00.4: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.453379] bnx2x 0000:05:00.4: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.453794] bnx2x 0000:05:00.4: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.453796] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.454121] bnx2x 0000:05:00.4: eth12: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem f0000000, IRQ 45, node addr 2c:76:8a:59:b3:92 Sep 27 12:49:51 debian kernel: [ 19.454155] bnx2x 0000:05:00.5: PCI INT D -> GSI 46 (level, low) -> IRQ 46 Sep 27 12:49:51 debian kernel: [ 19.455084] bnx2x 0000:05:00.5: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.455086] bnx2x 0000:05:00.5: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.455088] bnx2x 0000:05:00.5: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.455091] bnx2x 0000:05:00.5: shmem offset 0x3c7640 shmem2 offset 0x3c3fd8 Sep 27 12:49:51 debian kernel: [ 19.455093] bnx2x 0000:05:00.5: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.455095] bnx2x 0000:05:00.5: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.455097] bnx2x 0000:05:00.5: WoL capable Sep 27 12:49:51 debian kernel: [ 19.455100] bnx2x 0000:05:00.5: part number 0-0-0-0 Sep 27 12:49:51 debian kernel: [ 19.455103] bnx2x 0000:05:00.5: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.455191] bnx2x 0000:05:00.5: igu_dsb_id 34 igu_base_sb 35 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.455194] bnx2x 0000:05:00.5: shmem2base 0x3c3fd8, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.455198] bnx2x 0000:05:00.5: multi function mode Sep 27 12:49:51 debian kernel: [ 19.455200] bnx2x 0000:05:00.5: MF OV for func 5 is 1002 (0x03ea) Sep 27 12:49:51 debian kernel: [ 19.455206] bnx2x 0000:05:00.5: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.455207] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.455208] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.455211] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.455214] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.455220] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.455222] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.455224] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.455225] bnx2x 0000:05:00.5: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.455226] bnx2x 0000:05:00.5: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.455228] bnx2x 0000:05:00.5: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.455232] bnx2x 0000:05:00.5: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.455650] bnx2x 0000:05:00.5: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.455651] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.455982] bnx2x 0000:05:00.5: eth13: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem ee800000, IRQ 46, node addr 2c:76:8a:59:b3:96 Sep 27 12:49:51 debian kernel: [ 19.456006] bnx2x 0000:05:00.6: PCI INT D -> GSI 46 (level, low) -> IRQ 46 Sep 27 12:49:51 debian kernel: [ 19.456936] bnx2x 0000:05:00.6: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.456937] bnx2x 0000:05:00.6: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.456940] bnx2x 0000:05:00.6: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.456943] bnx2x 0000:05:00.6: shmem offset 0x3c6c80 shmem2 offset 0x3c3ec4 Sep 27 12:49:51 debian kernel: [ 19.456944] bnx2x 0000:05:00.6: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.456947] bnx2x 0000:05:00.6: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.456948] bnx2x 0000:05:00.6: WoL capable Sep 27 12:49:51 debian kernel: [ 19.456952] bnx2x 0000:05:00.6: part number 0-0-0-0 Sep 27 12:49:51 debian kernel: [ 19.456955] bnx2x 0000:05:00.6: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.457043] bnx2x 0000:05:00.6: igu_dsb_id 51 igu_base_sb 52 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.457045] bnx2x 0000:05:00.6: shmem2base 0x3c3ec4, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.457049] bnx2x 0000:05:00.6: multi function mode Sep 27 12:49:51 debian kernel: [ 19.457051] bnx2x 0000:05:00.6: MF OV for func 6 is 1003 (0x03eb) Sep 27 12:49:51 debian kernel: [ 19.457057] bnx2x 0000:05:00.6: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.457058] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.457059] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.457062] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.457065] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.457071] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.457073] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.457075] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.457076] bnx2x 0000:05:00.6: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.457078] bnx2x 0000:05:00.6: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.457079] bnx2x 0000:05:00.6: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.457083] bnx2x 0000:05:00.6: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.457499] bnx2x 0000:05:00.6: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.457501] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.457822] bnx2x 0000:05:00.6: eth14: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem ed000000, IRQ 46, node addr 2c:76:8a:59:b3:93 Sep 27 12:49:51 debian kernel: [ 19.457848] bnx2x 0000:05:00.7: PCI INT A -> GSI 40 (level, low) -> IRQ 40 Sep 27 12:49:51 debian kernel: [ 19.458778] bnx2x 0000:05:00.7: chip is in 2_PORT_MODE Sep 27 12:49:51 debian kernel: [ 19.458779] bnx2x 0000:05:00.7: chip ID is 0x168e1000 Sep 27 12:49:51 debian kernel: [ 19.458781] bnx2x 0000:05:00.7: flash_size 0x200000 (2097152) Sep 27 12:49:51 debian kernel: [ 19.458785] bnx2x 0000:05:00.7: shmem offset 0x3c7640 shmem2 offset 0x3c3fd8 Sep 27 12:49:51 debian kernel: [ 19.458786] bnx2x 0000:05:00.7: hw_config 0x00010001 Sep 27 12:49:51 debian kernel: [ 19.458789] bnx2x 0000:05:00.7: bc_ver 70031 Sep 27 12:49:51 debian kernel: [ 19.458790] bnx2x 0000:05:00.7: WoL capable Sep 27 12:49:51 debian kernel: [ 19.458794] bnx2x 0000:05:00.7: part number 0-0-0-0 Sep 27 12:49:51 debian kernel: [ 19.458797] bnx2x 0000:05:00.7: IGU Normal Mode Sep 27 12:49:51 debian kernel: [ 19.458885] bnx2x 0000:05:00.7: igu_dsb_id 51 igu_base_sb 52 igu_sb_cnt 16 Sep 27 12:49:51 debian kernel: [ 19.458887] bnx2x 0000:05:00.7: shmem2base 0x3c3fd8, size 244, mfcfg offset 16 Sep 27 12:49:51 debian kernel: [ 19.458891] bnx2x 0000:05:00.7: multi function mode Sep 27 12:49:51 debian kernel: [ 19.458893] bnx2x 0000:05:00.7: MF OV for func 7 is 1003 (0x03eb) Sep 27 12:49:51 debian kernel: [ 19.458899] bnx2x 0000:05:00.7: lane_config 0x00000000 speed_cap_mask0 0x00500050 link_config0 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.458900] bnx2x: [bnx2x_phy_probe:11586(eth%d)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 19.458902] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 19.458904] bnx2x: [bnx2x_populate_int_phy:11230(eth%d)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 19.458907] bnx2x: [bnx2x_populate_int_phy:11342(eth%d)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 19.458913] bnx2x: [bnx2x_phy_def_cfg:11499(eth%d)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 19.458915] bnx2x: [bnx2x_phy_probe:11602(eth%d)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 19.458917] bnx2x: [bnx2x_phy_probe:11643(eth%d)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 19.458918] bnx2x 0000:05:00.7: phy_addr 0x1 Sep 27 12:49:51 debian kernel: [ 19.458919] bnx2x 0000:05:00.7: supported 0x7460 0x0 Sep 27 12:49:51 debian kernel: [ 19.458921] bnx2x 0000:05:00.7: req_line_speed 0 req_duplex 1 req_flow_ctrl 0x0 advertising 0x7460 Sep 27 12:49:51 debian kernel: [ 19.458925] bnx2x 0000:05:00.7: drv_pulse 0x0 Sep 27 12:49:51 debian kernel: [ 19.459342] bnx2x 0000:05:00.7: fw_seq 0x00000000 Sep 27 12:49:51 debian kernel: [ 19.459343] bnx2x: [bnx2x_dcbx_set_state:938(eth%d)]DCB state [ON:on-chip with negotiation] Sep 27 12:49:51 debian kernel: [ 19.459673] bnx2x 0000:05:00.7: eth15: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem eb800000, IRQ 40, node addr 2c:76:8a:59:b3:97 Sep 27 12:49:51 debian kernel: [ 26.700212] bnx2x: [bnx2x_fw_command:2618(eth0)]wrote command (10000006) to FW MB param 0x00000000 Sep 27 12:49:51 debian kernel: [ 26.722283] bnx2x: [bnx2x_fw_command:2630(eth0)][after 20 ms] read (10130006) seq is (6) from FW MB Sep 27 12:49:51 debian kernel: [ 26.722286] bnx2x: [bnx2x_nic_load:1815(eth0)]pmf 1 Sep 27 12:49:51 debian kernel: [ 26.722297] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:51 debian kernel: [ 26.722308] bnx2x 0000:04:00.0: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:49:51 debian kernel: [ 26.809341] bnx2x: [bnx2x_init_hw_common:5849(eth0)]starting common init func 0 Sep 27 12:49:51 debian kernel: [ 27.166645] bnx2x: [bnx2x_common_init_phy:12320(eth0)]Begin common phy init Sep 27 12:49:51 debian kernel: [ 27.166766] bnx2x: [bnx2x_ext_phy_common_init:12300(eth0)]ext_phy 0x0 common init not required Sep 27 12:49:51 debian kernel: [ 27.166942] bnx2x: [bnx2x_ext_phy_common_init:12300(eth0)]ext_phy 0xff00 common init not required Sep 27 12:49:51 debian kernel: [ 27.167122] bnx2x: [bnx2x_link_reset:11850(eth0)]Resetting the link of port 0 Sep 27 12:49:51 debian kernel: [ 27.167241] bnx2x: [bnx2x_xmac_disable:1696(eth0)]Disable XMAC on port 0 Sep 27 12:49:51 debian kernel: [ 27.177969] bnx2x: [bnx2x_set_led:5986(eth0)]bnx2x_set_led: port 0, mode 0 Sep 27 12:49:51 debian kernel: [ 27.178091] bnx2x: [bnx2x_set_led:5988(eth0)]speed 0x0, hw_led_mode 0x1 Sep 27 12:49:51 debian kernel: [ 27.178254] bnx2x: [bnx2x_sfp_e3_set_transmitter:4356(eth0)]Setting WC TX to 0 Sep 27 12:49:51 debian kernel: [ 27.178477] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:51 debian kernel: [ 27.179541] bnx2x: [bnx2x_init_hw_port:6304(eth0)]starting port init port 0 Sep 27 12:49:51 debian kernel: [ 27.179878] bnx2x: [bnx2x_init_hw_func:6527(eth0)]starting func init func 0 Sep 27 12:49:51 debian kernel: [ 27.302002] bnx2x: [bnx2x_phy_probe:11586(eth0)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 27.302123] bnx2x: [bnx2x_phy_probe:11602(eth0)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 27.302306] bnx2x: [bnx2x_populate_int_phy:11230(eth0)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 27.302427] bnx2x: [bnx2x_populate_int_phy:11342(eth0)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 27.302615] bnx2x: [bnx2x_phy_def_cfg:11499(eth0)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 27.302800] bnx2x: [bnx2x_phy_probe:11602(eth0)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 27.302987] bnx2x: [bnx2x_phy_probe:11643(eth0)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 27.303138] bnx2x 0000:04:00.0: eth0: using MSI-X IRQs: sp 90 fp[0] 91 ... fp[0] 91 Sep 27 12:49:51 debian kernel: [ 27.303327] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth0)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:49:51 debian kernel: [ 27.306438] bnx2x: [bnx2x_fw_command:2618(eth0)]wrote command (11000007) to FW MB param 0x00000000 Sep 27 12:49:51 debian kernel: [ 27.316873] bnx2x: [bnx2x_fw_command:2630(eth0)][after 10 ms] read (11100007) seq is (7) from FW MB Sep 27 12:49:51 debian kernel: [ 27.322084] bnx2x: [bnx2x_phy_init:11783(eth0)]Phy Initialization started Sep 27 12:49:51 debian kernel: [ 27.322200] bnx2x: [bnx2x_phy_init:11785(eth0)](1) req_speed 0, req_flowctrl 0 Sep 27 12:49:51 debian kernel: [ 27.322373] bnx2x: [bnx2x_phy_init:11787(eth0)](2) req_speed 0, req_flowctrl 0 Sep 27 12:49:51 debian kernel: [ 27.322554] bnx2x: [bnx2x_emac_init:1463(eth0)]EMAC reset reg is 1024 Sep 27 12:49:51 debian kernel: [ 27.322711] bnx2x: [set_phy_vars:3478(eth0)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:49:51 debian kernel: [ 27.322887] bnx2x: [bnx2x_phy_init:11812(eth0)]Num of phys on board: 1 Sep 27 12:49:51 debian kernel: [ 27.323006] bnx2x: [bnx2x_warpcore_config_init:4250(eth0)]Begin Warpcore init, link_speed 0, serdes_net_if = 0x3000000 Sep 27 12:49:51 debian kernel: [ 27.323185] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:51 debian kernel: [ 27.323375] bnx2x: [bnx2x_warpcore_enable_AN_KR:3591(eth0)]Enable Auto Negotiation for KR Sep 27 12:49:51 debian kernel: [ 27.323771] bnx2x: [bnx2x_warpcore_enable_AN_KR:3611(eth0)]Advertize 1G Sep 27 12:49:51 debian kernel: [ 27.323967] bnx2x: [bnx2x_warpcore_enable_AN_KR:3622(eth0)]Advertize 10G Sep 27 12:49:51 debian kernel: [ 27.324535] bnx2x: [bnx2x_calc_ieee_aneg_adv:3438(eth0)]ieee_fc = 0x1a0 Sep 27 12:49:51 debian kernel: [ 27.324655] bnx2x: [bnx2x_ext_phy_set_pause:3505(eth0)]Ext phy AN advertize 0xc01 Sep 27 12:49:51 debian kernel: [ 27.325491] bnx2x: [bnx2x_warpcore_config_init:4340(eth0)]Exit config init Sep 27 12:49:51 debian kernel: [ 27.355850] bnx2x: [bnx2x_link_int_enable:5748(eth0)]port 0, is_xgxs 1, int_status 0x0 Sep 27 12:49:51 debian kernel: [ 27.356033] bnx2x: [bnx2x_link_int_enable:5752(eth0)] int_mask 0x3c0000, MI_INT 1, SERDES_LINK 0 Sep 27 12:49:51 debian kernel: [ 27.356215] bnx2x: [bnx2x_link_int_enable:5755(eth0)] 10G 0, XGXS_LINK 0 Sep 27 12:49:51 debian kernel: [ 27.358222] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:49:51 debian kernel: [ 27.364722] bnx2x: [bnx2x_fw_command:2618(eth8)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:49:51 debian kernel: [ 27.376832] bnx2x: [bnx2x_fw_command:2630(eth8)][after 10 ms] read (10130001) seq is (1) from FW MB Sep 27 12:49:51 debian kernel: [ 27.376835] bnx2x: [bnx2x_nic_load:1815(eth8)]pmf 1 Sep 27 12:49:51 debian kernel: [ 27.376843] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:49:51 debian kernel: [ 27.376852] bnx2x 0000:05:00.0: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:49:51 debian kernel: [ 27.404204] bnx2x: [bnx2x_init_hw_common:5849(eth8)]starting common init func 0 Sep 27 12:49:51 debian kernel: [ 27.724617] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:51 debian kernel: [ 27.734347] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:51 debian kernel: [ 27.734539] bnx2x: [bnx2x_link_update:6470(eth0)]port 0, XGXS?1, int_status 0x0 Sep 27 12:49:51 debian kernel: [ 27.734717] bnx2x: [bnx2x_link_update:6477(eth0)]int_mask 0x0 MI_INT 1, SERDES_LINK 0 Sep 27 12:49:51 debian kernel: [ 27.734893] bnx2x: [bnx2x_link_update:6481(eth0)] 10G 0, XGXS_LINK f Sep 27 12:49:51 debian kernel: [ 27.735082] bnx2x: [bnx2x_warpcore_read_status:5436(eth0)]0x81d1 = 0x5005 Sep 27 12:49:51 debian kernel: [ 27.735480] bnx2x: [bnx2x_ext_phy_resolve_fc:3573(eth0)]Ext PHY pause result 0xd Sep 27 12:49:51 debian kernel: [ 27.735729] bnx2x: [bnx2x_warpcore_read_status:5471(eth0)]lane 0 gp_speed 0x20f Sep 27 12:49:51 debian kernel: [ 27.735908] bnx2x: [bnx2x_get_link_speed_duplex:5284(eth0)]phy link up Sep 27 12:49:51 debian kernel: [ 27.736027] bnx2x: [bnx2x_get_link_speed_duplex:5359(eth0)] phy_link_up 1 line_speed 10000 Sep 27 12:49:51 debian kernel: [ 27.736210] bnx2x: [bnx2x_warpcore_read_status:5482(eth0)]duplex 1 flow_ctrl 0x300 link_status 0x140075 Sep 27 12:49:51 debian kernel: [ 27.736394] bnx2x: [bnx2x_link_update:6616(eth0)]vars->flow_ctrl = 0x300, vars->link_status = 0x140075, ext_phy_line_speed = 0 Sep 27 12:49:51 debian kernel: [ 27.738582] bnx2x: [bnx2x_link_int_ack:5828(eth0)]Ack link up interrupt with mask 0x3c0000 Sep 27 12:49:51 debian kernel: [ 27.738764] bnx2x: [bnx2x_xmac_enable:1706(eth0)]enabling XMAC Sep 27 12:49:51 debian kernel: [ 27.739884] bnx2x: [bnx2x_xmac_init:1658(eth0)]Init XMAC to 10G x 1 port per path Sep 27 12:49:51 debian kernel: [ 27.741098] bnx2x: [bnx2x_set_led:5986(eth0)]bnx2x_set_led: port 0, mode 2 Sep 27 12:49:51 debian kernel: [ 27.741217] bnx2x: [bnx2x_set_led:5988(eth0)]speed 0x2710, hw_led_mode 0x1 Sep 27 12:49:51 debian kernel: [ 27.761582] bnx2x 0000:04:00.0: eth0: NIC Link is Up, 2500 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:49:51 debian kernel: [ 27.762171] bnx2x: [bnx2x_common_init_phy:12320(eth8)]Begin common phy init Sep 27 12:49:51 debian kernel: [ 27.762298] bnx2x: [bnx2x_ext_phy_common_init:12300(eth8)]ext_phy 0x0 common init not required Sep 27 12:49:51 debian kernel: [ 27.762483] bnx2x: [bnx2x_ext_phy_common_init:12300(eth8)]ext_phy 0xff00 common init not required Sep 27 12:49:51 debian kernel: [ 27.762671] bnx2x: [bnx2x_link_reset:11850(eth8)]Resetting the link of port 0 Sep 27 12:49:51 debian kernel: [ 27.762797] bnx2x: [bnx2x_xmac_disable:1696(eth8)]Disable XMAC on port 0 Sep 27 12:49:51 debian kernel: [ 27.773564] bnx2x: [bnx2x_set_led:5986(eth8)]bnx2x_set_led: port 0, mode 0 Sep 27 12:49:51 debian kernel: [ 27.773690] bnx2x: [bnx2x_set_led:5988(eth8)]speed 0x0, hw_led_mode 0x1 Sep 27 12:49:51 debian kernel: [ 27.773859] bnx2x: [bnx2x_sfp_e3_set_transmitter:4356(eth8)]Setting WC TX to 0 Sep 27 12:49:51 debian kernel: [ 27.774093] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:49:51 debian kernel: [ 27.775171] bnx2x: [bnx2x_init_hw_port:6304(eth8)]starting port init port 0 Sep 27 12:49:51 debian kernel: [ 27.775521] bnx2x: [bnx2x_init_hw_func:6527(eth8)]starting func init func 0 Sep 27 12:49:51 debian kernel: [ 27.897653] bnx2x: [bnx2x_phy_probe:11586(eth8)]Begin phy probe Sep 27 12:49:51 debian kernel: [ 27.897777] bnx2x: [bnx2x_phy_probe:11602(eth8)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:49:51 debian kernel: [ 27.897969] bnx2x: [bnx2x_populate_int_phy:11230(eth8)]:chip_id = 0x168e0000 Sep 27 12:49:51 debian kernel: [ 27.898099] bnx2x: [bnx2x_populate_int_phy:11342(eth8)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:49:51 debian kernel: [ 27.898295] bnx2x: [bnx2x_phy_def_cfg:11499(eth8)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:49:51 debian kernel: [ 27.898490] bnx2x: [bnx2x_phy_probe:11602(eth8)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:49:51 debian kernel: [ 27.898683] bnx2x: [bnx2x_phy_probe:11643(eth8)]End phy probe. #phys found 1 Sep 27 12:49:51 debian kernel: [ 27.898837] bnx2x 0000:05:00.0: eth8: using MSI-X IRQs: sp 106 fp[0] 107 ... fp[0] 107 Sep 27 12:49:51 debian kernel: [ 27.899036] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth8)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:49:51 debian kernel: [ 27.902220] bnx2x: [bnx2x_fw_command:2618(eth8)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:49:51 debian kernel: [ 27.923458] bnx2x: [bnx2x_fw_command:2630(eth8)][after 20 ms] read (11100002) seq is (2) from FW MB Sep 27 12:49:51 debian kernel: [ 27.928676] bnx2x: [bnx2x_phy_init:11783(eth8)]Phy Initialization started Sep 27 12:49:51 debian kernel: [ 27.928802] bnx2x: [bnx2x_phy_init:11785(eth8)](1) req_speed 0, req_flowctrl 0 Sep 27 12:49:51 debian kernel: [ 27.928987] bnx2x: [bnx2x_phy_init:11787(eth8)](2) req_speed 0, req_flowctrl 0 Sep 27 12:49:51 debian kernel: [ 27.929181] bnx2x: [bnx2x_emac_init:1463(eth8)]EMAC reset reg is 1024 Sep 27 12:49:51 debian kernel: [ 27.929346] bnx2x: [set_phy_vars:3478(eth8)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:49:51 debian kernel: [ 27.929542] bnx2x: [bnx2x_phy_init:11812(eth8)]Num of phys on board: 1 Sep 27 12:49:51 debian kernel: [ 27.929671] bnx2x: [bnx2x_warpcore_config_init:4250(eth8)]Begin Warpcore init, link_speed 0, serdes_net_if = 0x3000000 Sep 27 12:49:51 debian kernel: [ 27.929866] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:49:51 debian kernel: [ 27.930066] bnx2x: [bnx2x_warpcore_enable_AN_KR:3591(eth8)]Enable Auto Negotiation for KR Sep 27 12:49:51 debian kernel: [ 27.930476] bnx2x: [bnx2x_warpcore_enable_AN_KR:3611(eth8)]Advertize 1G Sep 27 12:49:51 debian kernel: [ 27.930676] bnx2x: [bnx2x_warpcore_enable_AN_KR:3622(eth8)]Advertize 10G Sep 27 12:49:51 debian kernel: [ 27.931249] bnx2x: [bnx2x_calc_ieee_aneg_adv:3438(eth8)]ieee_fc = 0x1a0 Sep 27 12:49:51 debian kernel: [ 27.931374] bnx2x: [bnx2x_ext_phy_set_pause:3505(eth8)]Ext phy AN advertize 0xc01 Sep 27 12:49:51 debian kernel: [ 27.932226] bnx2x: [bnx2x_warpcore_config_init:4340(eth8)]Exit config init Sep 27 12:49:51 debian kernel: [ 27.962434] bnx2x: [bnx2x_link_int_enable:5748(eth8)]port 0, is_xgxs 0, int_status 0x0 Sep 27 12:49:51 debian kernel: [ 27.962624] bnx2x: [bnx2x_link_int_enable:5752(eth8)] int_mask 0x3c0000, MI_INT 0, SERDES_LINK 0 Sep 27 12:49:51 debian kernel: [ 27.962813] bnx2x: [bnx2x_link_int_enable:5755(eth8)] 10G 0, XGXS_LINK 0 Sep 27 12:49:51 debian kernel: [ 27.964797] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:49:51 debian kernel: [ 27.966523] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:49:51 debian kernel: [ 27.967754] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:49:51 debian kernel: [ 28.191469] bnx2x: [bnx2x_dcc_event:2965(eth0)]dcc_event 0x300 Sep 27 12:49:51 debian kernel: [ 28.191597] bnx2x: [bnx2x_fw_command:2618(eth0)]wrote command (30000008) to FW MB param 0x00000000 Sep 27 12:49:51 debian kernel: [ 28.202267] bnx2x: [bnx2x_fw_command:2630(eth0)][after 10 ms] read (30100008) seq is (8) from FW MB Sep 27 12:49:51 debian kernel: [ 28.202443] bnx2x: [set_phy_vars:3478(eth0)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:49:51 debian kernel: [ 28.202620] bnx2x: [bnx2x_link_status_update:4481(eth0)]phy link up Sep 27 12:49:51 debian kernel: [ 28.202737] bnx2x: [bnx2x_link_status_update:4590(eth0)]media_types = 0xf0 Sep 27 12:49:51 debian kernel: [ 28.202853] bnx2x: [bnx2x_link_status_update:4608(eth0)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:49:51 debian kernel: [ 28.203033] bnx2x: [bnx2x_link_status_update:4610(eth0)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:49:51 debian kernel: [ 28.233983] bnx2x: [bnx2x_dcc_event:2965(eth0)]dcc_event 0x200 Sep 27 12:49:51 debian kernel: [ 28.234109] bnx2x: [bnx2x_fw_command:2618(eth0)]wrote command (30000009) to FW MB param 0x00000000 Sep 27 12:49:51 debian kernel: [ 28.245236] bnx2x: [bnx2x_fw_command:2630(eth0)][after 10 ms] read (30100009) seq is (9) from FW MB Sep 27 12:49:51 debian kernel: [ 28.245411] bnx2x: [set_phy_vars:3478(eth0)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:49:51 debian kernel: [ 28.245592] bnx2x: [bnx2x_link_status_update:4481(eth0)]phy link up Sep 27 12:49:51 debian kernel: [ 28.245711] bnx2x: [bnx2x_link_status_update:4590(eth0)]media_types = 0xf0 Sep 27 12:49:51 debian kernel: [ 28.245833] bnx2x: [bnx2x_link_status_update:4608(eth0)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:49:51 debian kernel: [ 28.246018] bnx2x: [bnx2x_link_status_update:4610(eth0)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:49:51 debian kernel: [ 28.280196] bnx2x: [bnx2x_dcc_event:2965(eth0)]dcc_event 0x200 Sep 27 12:49:51 debian kernel: [ 28.280322] bnx2x: [bnx2x_fw_command:2618(eth0)]wrote command (3000000a) to FW MB param 0x00000000 Sep 27 12:49:51 debian kernel: [ 28.291205] bnx2x: [bnx2x_fw_command:2630(eth0)][after 10 ms] read (3010000a) seq is (a) from FW MB Sep 27 12:49:51 debian kernel: [ 28.291391] bnx2x: [set_phy_vars:3478(eth0)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:49:51 debian kernel: [ 28.291575] bnx2x: [bnx2x_link_status_update:4481(eth0)]phy link up Sep 27 12:49:51 debian kernel: [ 28.291696] bnx2x: [bnx2x_link_status_update:4590(eth0)]media_types = 0xf0 Sep 27 12:49:51 debian kernel: [ 28.291816] bnx2x: [bnx2x_link_status_update:4608(eth0)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:49:51 debian kernel: [ 28.291999] bnx2x: [bnx2x_link_status_update:4610(eth0)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:49:51 debian kernel: [ 28.311376] bnx2x: [bnx2x_dcc_event:2965(eth0)]dcc_event 0x200 Sep 27 12:49:51 debian kernel: [ 28.311501] bnx2x: [bnx2x_fw_command:2618(eth0)]wrote command (3000000b) to FW MB param 0x00000000 Sep 27 12:49:51 debian kernel: [ 28.322184] bnx2x: [bnx2x_fw_command:2630(eth0)][after 10 ms] read (3010000b) seq is (b) from FW MB Sep 27 12:49:51 debian kernel: [ 28.322370] bnx2x: [set_phy_vars:3478(eth0)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:49:51 debian kernel: [ 28.322552] bnx2x: [bnx2x_link_status_update:4481(eth0)]phy link up Sep 27 12:49:51 debian kernel: [ 28.322674] bnx2x: [bnx2x_link_status_update:4590(eth0)]media_types = 0xf0 Sep 27 12:49:51 debian kernel: [ 28.322795] bnx2x: [bnx2x_link_status_update:4608(eth0)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:49:51 debian kernel: [ 28.322981] bnx2x: [bnx2x_link_status_update:4610(eth0)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:49:51 debian kernel: [ 28.341169] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:49:51 debian kernel: [ 28.341362] bnx2x: [bnx2x_link_update:6470(eth8)]port 0, XGXS?1, int_status 0x0 Sep 27 12:49:51 debian kernel: [ 28.341543] bnx2x: [bnx2x_link_update:6477(eth8)]int_mask 0x0 MI_INT 0, SERDES_LINK 0 Sep 27 12:49:51 debian kernel: [ 28.342991] bnx2x: [bnx2x_link_update:6481(eth8)] 10G 0, XGXS_LINK f Sep 27 12:49:51 debian kernel: [ 28.343182] bnx2x: [bnx2x_warpcore_read_status:5436(eth8)]0x81d1 = 0x5005 Sep 27 12:49:51 debian kernel: [ 28.343580] bnx2x: [bnx2x_ext_phy_resolve_fc:3573(eth8)]Ext PHY pause result 0xd Sep 27 12:49:51 debian kernel: [ 28.343826] bnx2x: [bnx2x_warpcore_read_status:5471(eth8)]lane 0 gp_speed 0x20f Sep 27 12:49:51 debian kernel: [ 28.344001] bnx2x: [bnx2x_get_link_speed_duplex:5284(eth8)]phy link up Sep 27 12:49:51 debian kernel: [ 28.344117] bnx2x: [bnx2x_get_link_speed_duplex:5359(eth8)] phy_link_up 1 line_speed 10000 Sep 27 12:49:51 debian kernel: [ 28.344292] bnx2x: [bnx2x_warpcore_read_status:5482(eth8)]duplex 1 flow_ctrl 0x300 link_status 0x140075 Sep 27 12:49:51 debian kernel: [ 28.344467] bnx2x: [bnx2x_link_update:6616(eth8)]vars->flow_ctrl = 0x300, vars->link_status = 0x140075, ext_phy_line_speed = 0 Sep 27 12:49:51 debian kernel: [ 28.346166] bnx2x: [bnx2x_link_int_ack:5828(eth8)]Ack link up interrupt with mask 0x3c0000 Sep 27 12:49:51 debian kernel: [ 28.346351] bnx2x: [bnx2x_xmac_enable:1706(eth8)]enabling XMAC Sep 27 12:49:51 debian kernel: [ 28.347471] bnx2x: [bnx2x_xmac_init:1658(eth8)]Init XMAC to 10G x 1 port per path Sep 27 12:49:51 debian kernel: [ 28.348681] bnx2x: [bnx2x_set_led:5986(eth8)]bnx2x_set_led: port 0, mode 2 Sep 27 12:49:51 debian kernel: [ 28.348801] bnx2x: [bnx2x_set_led:5988(eth8)]speed 0x2710, hw_led_mode 0x1 Sep 27 12:49:51 debian kernel: [ 28.369162] bnx2x 0000:05:00.0: eth8: NIC Link is Up, 2500 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:49:51 debian kernel: [ 28.370039] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:49:51 debian kernel: [ 28.378148] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:49:51 debian kernel: [ 28.665970] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:49:51 debian kernel: [ 28.725917] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:51 debian kernel: [ 28.866638] bnx2x: [bnx2x_dcc_event:2965(eth8)]dcc_event 0x300 Sep 27 12:49:51 debian kernel: [ 28.866763] bnx2x: [bnx2x_fw_command:2618(eth8)]wrote command (30000003) to FW MB param 0x00000000 Sep 27 12:49:51 debian kernel: [ 28.877805] bnx2x: [bnx2x_fw_command:2630(eth8)][after 10 ms] read (30100003) seq is (3) from FW MB Sep 27 12:49:51 debian kernel: [ 28.877992] bnx2x: [set_phy_vars:3478(eth8)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:49:51 debian kernel: [ 28.878177] bnx2x: [bnx2x_link_status_update:4481(eth8)]phy link up Sep 27 12:49:51 debian kernel: [ 28.878298] bnx2x: [bnx2x_link_status_update:4590(eth8)]media_types = 0xf0 Sep 27 12:49:51 debian kernel: [ 28.878422] bnx2x: [bnx2x_link_status_update:4608(eth8)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:49:51 debian kernel: [ 28.878605] bnx2x: [bnx2x_link_status_update:4610(eth8)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:49:51 debian kernel: [ 28.897199] bnx2x: [bnx2x_dcc_event:2965(eth8)]dcc_event 0x200 Sep 27 12:49:51 debian kernel: [ 28.897320] bnx2x: [bnx2x_fw_command:2618(eth8)]wrote command (30000004) to FW MB param 0x00000000 Sep 27 12:49:51 debian kernel: [ 28.907784] bnx2x: [bnx2x_fw_command:2630(eth8)][after 10 ms] read (30100004) seq is (4) from FW MB Sep 27 12:49:51 debian kernel: [ 28.907970] bnx2x: [set_phy_vars:3478(eth8)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:49:51 debian kernel: [ 28.908149] bnx2x: [bnx2x_link_status_update:4481(eth8)]phy link up Sep 27 12:49:51 debian kernel: [ 28.908266] bnx2x: [bnx2x_link_status_update:4590(eth8)]media_types = 0xf0 Sep 27 12:49:51 debian kernel: [ 28.908386] bnx2x: [bnx2x_link_status_update:4608(eth8)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:49:51 debian kernel: [ 28.908568] bnx2x: [bnx2x_link_status_update:4610(eth8)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:49:51 debian kernel: [ 28.941258] bnx2x: [bnx2x_dcc_event:2965(eth8)]dcc_event 0x200 Sep 27 12:49:51 debian kernel: [ 28.941383] bnx2x: [bnx2x_fw_command:2618(eth8)]wrote command (30000005) to FW MB param 0x00000000 Sep 27 12:49:51 debian kernel: [ 28.951754] bnx2x: [bnx2x_fw_command:2630(eth8)][after 10 ms] read (30100005) seq is (5) from FW MB Sep 27 12:49:51 debian kernel: [ 28.951940] bnx2x: [set_phy_vars:3478(eth8)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:49:51 debian kernel: [ 28.952122] bnx2x: [bnx2x_link_status_update:4481(eth8)]phy link up Sep 27 12:49:51 debian kernel: [ 28.952240] bnx2x: [bnx2x_link_status_update:4590(eth8)]media_types = 0xf0 Sep 27 12:49:51 debian kernel: [ 28.952359] bnx2x: [bnx2x_link_status_update:4608(eth8)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:49:51 debian kernel: [ 28.952538] bnx2x: [bnx2x_link_status_update:4610(eth8)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:49:51 debian kernel: [ 29.008603] bnx2x: [bnx2x_dcc_event:2965(eth8)]dcc_event 0x200 Sep 27 12:49:51 debian kernel: [ 29.008733] bnx2x: [bnx2x_fw_command:2618(eth8)]wrote command (30000006) to FW MB param 0x00000000 Sep 27 12:49:51 debian kernel: [ 29.019707] bnx2x: [bnx2x_fw_command:2630(eth8)][after 10 ms] read (30100006) seq is (6) from FW MB Sep 27 12:49:51 debian kernel: [ 29.019894] bnx2x: [set_phy_vars:3478(eth8)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:49:51 debian kernel: [ 29.020075] bnx2x: [bnx2x_link_status_update:4481(eth8)]phy link up Sep 27 12:49:51 debian kernel: [ 29.020192] bnx2x: [bnx2x_link_status_update:4590(eth8)]media_types = 0xf0 Sep 27 12:49:51 debian kernel: [ 29.020312] bnx2x: [bnx2x_link_status_update:4608(eth8)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:49:51 debian kernel: [ 29.020494] bnx2x: [bnx2x_link_status_update:4610(eth8)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:49:51 debian kernel: [ 29.379463] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:49:51 debian kernel: [ 29.727229] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:51 debian kernel: [ 30.380780] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:49:52 debian kernel: [ 30.728544] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:52 debian kernel: [ 31.382098] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:49:53 debian kernel: [ 31.729861] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:53 debian kernel: [ 32.383413] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:49:54 debian kernel: [ 32.731196] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:54 debian kernel: [ 33.384748] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:49:55 debian kernel: [ 33.732489] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:55 debian kernel: [ 34.386040] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:49:56 debian kernel: [ 34.733805] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:56 debian kernel: [ 35.387356] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:49:57 debian kernel: [ 35.735121] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:57 debian kernel: [ 36.388672] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:49:58 debian kernel: [ 36.736433] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:58 debian kernel: [ 37.389984] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:49:59 debian kernel: [ 37.737749] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:49:59 debian kernel: [ 38.391319] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:00 debian kernel: [ 38.739061] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:00 debian kernel: [ 39.392615] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:01 debian kernel: [ 39.740388] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:01 debian kernel: [ 40.393927] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:02 debian kernel: [ 40.741695] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:02 debian kernel: [ 41.395241] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:03 debian kernel: [ 41.743022] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:03 debian kernel: [ 42.396557] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:04 debian kernel: [ 42.744316] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:04 debian kernel: [ 43.398058] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:05 debian kernel: [ 43.745632] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:05 debian kernel: [ 44.399185] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:06 debian kernel: [ 44.746947] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:06 debian kernel: [ 45.401499] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:07 debian kernel: [ 45.748264] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:07 debian kernel: [ 46.403815] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:08 debian kernel: [ 46.749576] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:08 debian kernel: [ 47.405131] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:09 debian kernel: [ 47.750912] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:09 debian kernel: [ 48.406448] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:10 debian kernel: [ 48.752367] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:10 debian kernel: [ 49.407775] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:11 debian kernel: [ 49.753550] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:11 debian kernel: [ 50.409089] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:12 debian kernel: [ 50.754862] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:12 debian kernel: [ 51.410408] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:13 debian kernel: [ 51.756303] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:13 debian kernel: [ 52.411706] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:14 debian kernel: [ 52.757485] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:14 debian kernel: [ 53.413021] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:15 debian kernel: [ 53.758795] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:15 debian kernel: [ 54.414336] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:16 debian kernel: [ 54.760115] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:16 debian kernel: [ 55.415664] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:17 debian kernel: [ 55.761439] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:17 debian kernel: [ 56.416978] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:18 debian kernel: [ 56.762767] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:18 debian kernel: [ 57.418295] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:19 debian kernel: [ 57.764061] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:19 debian kernel: [ 58.419607] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:20 debian kernel: [ 58.765500] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:20 debian kernel: [ 58.786013] bnx2x: [bnx2x_get_settings:251(eth3)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.786773] bnx2x: [bnx2x_extract_max_cfg:1490(eth7)]Max BW configured to 0 - using 100 instead Sep 27 12:50:20 debian kernel: [ 58.786957] bnx2x: [bnx2x_get_settings:251(eth7)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.787721] bnx2x: [bnx2x_get_settings:251(eth12)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.788645] bnx2x: [bnx2x_get_settings:251(eth2)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.789394] bnx2x: [bnx2x_get_settings:251(eth6)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.790148] bnx2x: [bnx2x_get_settings:251(eth11)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.790940] bnx2x: [bnx2x_extract_max_cfg:1490(eth15)]Max BW configured to 0 - using 100 instead Sep 27 12:50:20 debian kernel: [ 58.791127] bnx2x: [bnx2x_get_settings:251(eth15)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.791933] bnx2x: [bnx2x_get_settings:251(eth1)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.792788] bnx2x: [bnx2x_get_settings:251(eth5)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.793544] bnx2x: [bnx2x_get_settings:251(eth10)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.794333] bnx2x: [bnx2x_get_settings:251(eth9)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.795119] bnx2x: [bnx2x_get_settings:251(eth14)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.795923] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.796653] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.797402] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 58.798188] bnx2x: [bnx2x_get_settings:251(eth13)]ethtool_cmd: cmd 1 Sep 27 12:50:20 debian kernel: [ 59.420909] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:21 debian kernel: [ 59.766687] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:21 debian kernel: [ 60.422223] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:22 debian kernel: [ 60.768133] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:22 debian kernel: [ 61.423553] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:23 debian kernel: [ 61.769319] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:23 debian kernel: [ 62.424853] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:24 debian kernel: [ 62.770634] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:24 debian kernel: [ 63.426181] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:25 debian kernel: [ 63.771955] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:25 debian kernel: [ 64.427498] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:26 debian kernel: [ 64.773274] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:26 debian kernel: [ 65.428814] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:27 debian kernel: [ 65.774592] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:27 debian kernel: [ 66.430112] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:28 debian kernel: [ 66.775903] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:28 debian kernel: [ 67.431427] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:29 debian kernel: [ 67.777220] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:29 debian kernel: [ 68.432741] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:30 debian kernel: [ 68.778539] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:30 debian kernel: [ 69.434069] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:31 debian kernel: [ 69.779974] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:31 debian kernel: [ 70.057859] bnx2x: [bnx2x_get_settings:251(eth3)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.058621] bnx2x: [bnx2x_extract_max_cfg:1490(eth7)]Max BW configured to 0 - using 100 instead Sep 27 12:50:31 debian kernel: [ 70.058809] bnx2x: [bnx2x_get_settings:251(eth7)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.059579] bnx2x: [bnx2x_get_settings:251(eth12)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.060497] bnx2x: [bnx2x_get_settings:251(eth2)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.061242] bnx2x: [bnx2x_get_settings:251(eth6)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.061992] bnx2x: [bnx2x_get_settings:251(eth11)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.062775] bnx2x: [bnx2x_extract_max_cfg:1490(eth15)]Max BW configured to 0 - using 100 instead Sep 27 12:50:31 debian kernel: [ 70.062963] bnx2x: [bnx2x_get_settings:251(eth15)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.063760] bnx2x: [bnx2x_get_settings:251(eth1)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.064601] bnx2x: [bnx2x_get_settings:251(eth5)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.065353] bnx2x: [bnx2x_get_settings:251(eth10)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.066139] bnx2x: [bnx2x_get_settings:251(eth9)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.066921] bnx2x: [bnx2x_get_settings:251(eth14)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.067727] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.068463] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.069211] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.069997] bnx2x: [bnx2x_get_settings:251(eth13)]ethtool_cmd: cmd 1 Sep 27 12:50:31 debian kernel: [ 70.435370] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:32 debian kernel: [ 70.781157] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:32 debian kernel: [ 71.436685] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:32 debian kernel: [ 71.453788] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:50:32 debian kernel: [ 71.473051] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:50:33 debian kernel: [ 71.782463] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:33 debian kernel: [ 72.437996] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:33 debian kernel: [ 72.495052] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:50:33 debian kernel: [ 72.512829] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:50:34 debian kernel: [ 72.783778] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:34 debian kernel: [ 73.439312] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:35 debian kernel: [ 73.785136] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:35 debian kernel: [ 74.440625] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:36 debian kernel: [ 74.786406] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:36 debian kernel: [ 75.441940] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:37 debian kernel: [ 75.787846] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:37 debian kernel: [ 76.443254] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:38 debian kernel: [ 76.789035] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:38 debian kernel: [ 77.444570] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:39 debian kernel: [ 77.790351] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:39 debian kernel: [ 78.445884] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:40 debian kernel: [ 78.791789] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:40 debian kernel: [ 79.447199] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:41 debian kernel: [ 79.792981] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:41 debian kernel: [ 80.448513] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:42 debian kernel: [ 80.794295] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:42 debian kernel: [ 81.449828] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:43 debian kernel: [ 81.795732] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:43 debian kernel: [ 82.451142] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:44 debian kernel: [ 82.796926] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:44 debian kernel: [ 83.452457] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:45 debian kernel: [ 83.798241] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:45 debian kernel: [ 84.453770] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:46 debian kernel: [ 84.799677] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:46 debian kernel: [ 85.455086] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:47 debian kernel: [ 85.800871] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:47 debian kernel: [ 86.456400] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:48 debian kernel: [ 86.802186] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:48 debian kernel: [ 87.457715] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:49 debian kernel: [ 87.803576] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:49 debian kernel: [ 88.314942] bnx2x: [bnx2x_get_settings:251(eth3)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.315702] bnx2x: [bnx2x_extract_max_cfg:1490(eth7)]Max BW configured to 0 - using 100 instead Sep 27 12:50:49 debian kernel: [ 88.315886] bnx2x: [bnx2x_get_settings:251(eth7)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.316649] bnx2x: [bnx2x_get_settings:251(eth12)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.317596] bnx2x: [bnx2x_get_settings:251(eth2)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.318338] bnx2x: [bnx2x_get_settings:251(eth6)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.319092] bnx2x: [bnx2x_get_settings:251(eth11)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.319880] bnx2x: [bnx2x_extract_max_cfg:1490(eth15)]Max BW configured to 0 - using 100 instead Sep 27 12:50:49 debian kernel: [ 88.320064] bnx2x: [bnx2x_get_settings:251(eth15)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.320861] bnx2x: [bnx2x_get_settings:251(eth1)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.321723] bnx2x: [bnx2x_get_settings:251(eth5)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.322480] bnx2x: [bnx2x_get_settings:251(eth10)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.323263] bnx2x: [bnx2x_get_settings:251(eth9)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.324034] bnx2x: [bnx2x_get_settings:251(eth14)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.324828] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.325567] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.326296] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.327077] bnx2x: [bnx2x_get_settings:251(eth13)]ethtool_cmd: cmd 1 Sep 27 12:50:49 debian kernel: [ 88.459032] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:50 debian kernel: [ 88.804817] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:50 debian kernel: [ 89.460349] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:51 debian kernel: [ 89.806118] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:51 debian kernel: [ 90.461683] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:52 debian kernel: [ 90.807455] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:52 debian kernel: [ 91.462979] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:53 debian kernel: [ 91.808778] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:53 debian kernel: [ 92.464306] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:54 debian kernel: [ 92.810113] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:54 debian kernel: [ 93.465608] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:55 debian kernel: [ 93.811396] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:55 debian kernel: [ 94.466938] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:56 debian kernel: [ 94.812723] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:56 debian kernel: [ 95.468238] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:57 debian kernel: [ 95.814032] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:57 debian kernel: [ 96.469566] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:58 debian kernel: [ 96.815473] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:58 debian kernel: [ 97.470882] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:50:59 debian kernel: [ 97.816647] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:50:59 debian kernel: [ 98.472182] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:51:00 debian kernel: [ 98.817983] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:51:00 debian kernel: [ 99.473495] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:51:01 debian kernel: [ 99.556631] bnx2x: [bnx2x_get_settings:251(eth3)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.557396] bnx2x: [bnx2x_extract_max_cfg:1490(eth7)]Max BW configured to 0 - using 100 instead Sep 27 12:51:01 debian kernel: [ 99.557582] bnx2x: [bnx2x_get_settings:251(eth7)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.558334] bnx2x: [bnx2x_get_settings:251(eth12)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.559247] bnx2x: [bnx2x_get_settings:251(eth2)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.559992] bnx2x: [bnx2x_get_settings:251(eth6)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.560757] bnx2x: [bnx2x_get_settings:251(eth11)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.561548] bnx2x: [bnx2x_extract_max_cfg:1490(eth15)]Max BW configured to 0 - using 100 instead Sep 27 12:51:01 debian kernel: [ 99.561733] bnx2x: [bnx2x_get_settings:251(eth15)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.562546] bnx2x: [bnx2x_get_settings:251(eth1)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.564718] bnx2x: [bnx2x_get_settings:251(eth5)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.565476] bnx2x: [bnx2x_get_settings:251(eth10)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.566262] bnx2x: [bnx2x_get_settings:251(eth9)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.567054] bnx2x: [bnx2x_get_settings:251(eth14)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.567876] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.568618] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.569364] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.570163] bnx2x: [bnx2x_get_settings:251(eth13)]ethtool_cmd: cmd 1 Sep 27 12:51:01 debian kernel: [ 99.819270] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:51:01 debian kernel: [ 100.474808] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:51:02 debian kernel: [ 100.820577] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:51:02 debian kernel: [ 100.928422] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:51:02 debian kernel: [ 100.945988] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:51:02 debian kernel: [ 101.476124] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:51:03 debian kernel: [ 101.821910] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:51:03 debian kernel: [ 101.967984] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:51:03 debian kernel: [ 101.985631] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:51:03 debian kernel: [ 102.477436] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:51:04 debian kernel: [ 102.823251] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:51:04 debian kernel: [ 103.007539] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:51:04 debian kernel: [ 103.025076] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:51:04 debian kernel: [ 103.478750] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:51:05 debian kernel: [ 103.824512] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:51:05 debian kernel: [ 104.046716] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:51:05 debian kernel: [ 104.063991] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:51:05 debian kernel: [ 104.480067] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:51:06 debian kernel: [ 104.825825] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:51:06 debian kernel: [ 105.085875] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:51:06 debian kernel: [ 105.104260] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:51:06 debian kernel: [ 105.481618] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:51:07 debian kernel: [ 105.696911] bnx2x: [bnx2x_fw_command:2618(eth1)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:07 debian kernel: [ 105.718212] bnx2x: [bnx2x_fw_command:2630(eth1)][after 20 ms] read (10100001) seq is (1) from FW MB Sep 27 12:51:07 debian kernel: [ 105.718406] bnx2x: [bnx2x_nic_load:1815(eth1)]pmf 1 Sep 27 12:51:07 debian kernel: [ 105.718414] bnx2x: [bnx2x_set_aer_mmd:3342(eth1)]Set AER to 0x2 Sep 27 12:51:07 debian kernel: [ 105.718673] bnx2x 0000:04:00.1: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:51:07 debian kernel: [ 105.721754] bnx2x: [bnx2x_init_hw_common:5849(eth1)]starting common init func 1 Sep 27 12:51:07 debian kernel: [ 105.827144] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:51:07 debian kernel: [ 106.079388] bnx2x: [bnx2x_link_reset:11850(eth1)]Resetting the link of port 0 Sep 27 12:51:07 debian kernel: [ 106.079519] bnx2x: [bnx2x_xmac_disable:1696(eth1)]Disable XMAC on port 0 Sep 27 12:51:07 debian kernel: [ 106.089959] bnx2x: [bnx2x_set_led:5986(eth1)]bnx2x_set_led: port 0, mode 0 Sep 27 12:51:07 debian kernel: [ 106.090087] bnx2x: [bnx2x_set_led:5988(eth1)]speed 0x0, hw_led_mode 0x1 Sep 27 12:51:07 debian kernel: [ 106.090255] bnx2x: [bnx2x_sfp_e3_set_transmitter:4356(eth1)]Setting WC TX to 0 Sep 27 12:51:07 debian kernel: [ 106.090487] bnx2x: [bnx2x_set_aer_mmd:3342(eth1)]Set AER to 0x2 Sep 27 12:51:07 debian kernel: [ 106.091566] bnx2x: [bnx2x_init_hw_port:6304(eth1)]starting port init port 0 Sep 27 12:51:07 debian kernel: [ 106.091916] bnx2x: [bnx2x_init_hw_func:6527(eth1)]starting func init func 0 Sep 27 12:51:07 debian kernel: [ 106.214051] bnx2x: [bnx2x_phy_probe:11586(eth1)]Begin phy probe Sep 27 12:51:07 debian kernel: [ 106.214176] bnx2x: [bnx2x_phy_probe:11602(eth1)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:07 debian kernel: [ 106.214370] bnx2x: [bnx2x_populate_int_phy:11230(eth1)]:chip_id = 0x168e0000 Sep 27 12:51:07 debian kernel: [ 106.214497] bnx2x: [bnx2x_populate_int_phy:11342(eth1)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:07 debian kernel: [ 106.214694] bnx2x: [bnx2x_phy_def_cfg:11499(eth1)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:51:07 debian kernel: [ 106.214889] bnx2x: [bnx2x_phy_probe:11602(eth1)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:07 debian kernel: [ 106.215083] bnx2x: [bnx2x_phy_probe:11643(eth1)]End phy probe. #phys found 1 Sep 27 12:51:07 debian kernel: [ 106.215236] bnx2x 0000:04:00.1: eth1: using MSI-X IRQs: sp 92 fp[0] 93 ... fp[0] 93 Sep 27 12:51:07 debian kernel: [ 106.215434] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth1)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:07 debian kernel: [ 106.216600] bnx2x: [bnx2x_extract_max_cfg:1490(eth1)]Max BW configured to 0 - using 100 instead Sep 27 12:51:07 debian kernel: [ 106.218812] bnx2x: [bnx2x_fw_command:2618(eth1)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:07 debian kernel: [ 106.229861] bnx2x: [bnx2x_fw_command:2630(eth1)][after 10 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:07 debian kernel: [ 106.235129] bnx2x: [bnx2x_phy_init:11783(eth1)]Phy Initialization started Sep 27 12:51:07 debian kernel: [ 106.235256] bnx2x: [bnx2x_phy_init:11785(eth1)](1) req_speed 0, req_flowctrl 0 Sep 27 12:51:07 debian kernel: [ 106.235445] bnx2x: [bnx2x_phy_init:11787(eth1)](2) req_speed 0, req_flowctrl 0 Sep 27 12:51:07 debian kernel: [ 106.235641] bnx2x: [bnx2x_emac_init:1463(eth1)]EMAC reset reg is 1024 Sep 27 12:51:07 debian kernel: [ 106.235807] bnx2x: [set_phy_vars:3478(eth1)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:07 debian kernel: [ 106.236001] bnx2x: [bnx2x_phy_init:11812(eth1)]Num of phys on board: 1 Sep 27 12:51:07 debian kernel: [ 106.236128] bnx2x: [bnx2x_warpcore_config_init:4250(eth1)]Begin Warpcore init, link_speed 0, serdes_net_if = 0x3000000 Sep 27 12:51:07 debian kernel: [ 106.236319] bnx2x: [bnx2x_set_aer_mmd:3342(eth1)]Set AER to 0x2 Sep 27 12:51:07 debian kernel: [ 106.236516] bnx2x: [bnx2x_warpcore_enable_AN_KR:3591(eth1)]Enable Auto Negotiation for KR Sep 27 12:51:07 debian kernel: [ 106.236931] bnx2x: [bnx2x_warpcore_enable_AN_KR:3611(eth1)]Advertize 1G Sep 27 12:51:07 debian kernel: [ 106.237132] bnx2x: [bnx2x_warpcore_enable_AN_KR:3622(eth1)]Advertize 10G Sep 27 12:51:07 debian kernel: [ 106.237705] bnx2x: [bnx2x_calc_ieee_aneg_adv:3438(eth1)]ieee_fc = 0x1a0 Sep 27 12:51:07 debian kernel: [ 106.237831] bnx2x: [bnx2x_ext_phy_set_pause:3505(eth1)]Ext phy AN advertize 0xc01 Sep 27 12:51:07 debian kernel: [ 106.238677] bnx2x: [bnx2x_warpcore_config_init:4340(eth1)]Exit config init Sep 27 12:51:07 debian kernel: [ 106.268841] bnx2x: [bnx2x_link_int_enable:5748(eth1)]port 0, is_xgxs 1, int_status 0x0 Sep 27 12:51:07 debian kernel: [ 106.269032] bnx2x: [bnx2x_link_int_enable:5752(eth1)] int_mask 0x3c0000, MI_INT 1, SERDES_LINK 0 Sep 27 12:51:07 debian kernel: [ 106.269223] bnx2x: [bnx2x_link_int_enable:5755(eth1)] 10G 0, XGXS_LINK 0 Sep 27 12:51:07 debian kernel: [ 106.271241] bnx2x: [bnx2x_get_settings:251(eth1)]ethtool_cmd: cmd 1 Sep 27 12:51:07 debian kernel: [ 106.277878] bnx2x: [bnx2x_fw_command:2618(eth9)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:07 debian kernel: [ 106.299816] bnx2x: [bnx2x_fw_command:2630(eth9)][after 20 ms] read (10100001) seq is (1) from FW MB Sep 27 12:51:07 debian kernel: [ 106.300001] bnx2x: [bnx2x_nic_load:1815(eth9)]pmf 1 Sep 27 12:51:07 debian kernel: [ 106.300007] bnx2x: [bnx2x_set_aer_mmd:3342(eth9)]Set AER to 0x2 Sep 27 12:51:07 debian kernel: [ 106.300256] bnx2x 0000:05:00.1: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:51:07 debian kernel: [ 106.303289] bnx2x: [bnx2x_init_hw_common:5849(eth9)]starting common init func 1 Sep 27 12:51:07 debian kernel: [ 106.482699] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:51:08 debian kernel: [ 106.647696] bnx2x: [bnx2x_set_aer_mmd:3342(eth1)]Set AER to 0x2 Sep 27 12:51:08 debian kernel: [ 106.647891] bnx2x: [bnx2x_link_update:6470(eth1)]port 0, XGXS?1, int_status 0x0 Sep 27 12:51:08 debian kernel: [ 106.649338] bnx2x: [bnx2x_link_update:6477(eth1)]int_mask 0x0 MI_INT 1, SERDES_LINK 0 Sep 27 12:51:08 debian kernel: [ 106.649513] bnx2x: [bnx2x_link_update:6481(eth1)] 10G 0, XGXS_LINK f Sep 27 12:51:08 debian kernel: [ 106.649703] bnx2x: [bnx2x_warpcore_read_status:5436(eth1)]0x81d1 = 0x5005 Sep 27 12:51:08 debian kernel: [ 106.650100] bnx2x: [bnx2x_ext_phy_resolve_fc:3573(eth1)]Ext PHY pause result 0xd Sep 27 12:51:08 debian kernel: [ 106.650344] bnx2x: [bnx2x_warpcore_read_status:5471(eth1)]lane 2 gp_speed 0x20f Sep 27 12:51:08 debian kernel: [ 106.650518] bnx2x: [bnx2x_get_link_speed_duplex:5284(eth1)]phy link up Sep 27 12:51:08 debian kernel: [ 106.650636] bnx2x: [bnx2x_get_link_speed_duplex:5359(eth1)] phy_link_up 1 line_speed 10000 Sep 27 12:51:08 debian kernel: [ 106.650811] bnx2x: [bnx2x_warpcore_read_status:5482(eth1)]duplex 1 flow_ctrl 0x300 link_status 0x140075 Sep 27 12:51:08 debian kernel: [ 106.650994] bnx2x: [bnx2x_link_update:6616(eth1)]vars->flow_ctrl = 0x300, vars->link_status = 0x140075, ext_phy_line_speed = 0 Sep 27 12:51:08 debian kernel: [ 106.652572] bnx2x: [bnx2x_link_int_ack:5828(eth1)]Ack link up interrupt with mask 0x3c0000 Sep 27 12:51:08 debian kernel: [ 106.652754] bnx2x: [bnx2x_xmac_enable:1706(eth1)]enabling XMAC Sep 27 12:51:08 debian kernel: [ 106.653878] bnx2x: [bnx2x_xmac_init:1658(eth1)]Init XMAC to 10G x 1 port per path Sep 27 12:51:08 debian kernel: [ 106.655098] bnx2x: [bnx2x_set_led:5986(eth1)]bnx2x_set_led: port 0, mode 2 Sep 27 12:51:08 debian kernel: [ 106.655219] bnx2x: [bnx2x_set_led:5988(eth1)]speed 0x2710, hw_led_mode 0x1 Sep 27 12:51:08 debian kernel: [ 106.659857] bnx2x: [bnx2x_link_reset:11850(eth9)]Resetting the link of port 0 Sep 27 12:51:08 debian kernel: [ 106.659980] bnx2x: [bnx2x_xmac_disable:1696(eth9)]Disable XMAC on port 0 Sep 27 12:51:08 debian kernel: [ 106.670562] bnx2x: [bnx2x_set_led:5986(eth9)]bnx2x_set_led: port 0, mode 0 Sep 27 12:51:08 debian kernel: [ 106.670684] bnx2x: [bnx2x_set_led:5988(eth9)]speed 0x0, hw_led_mode 0x1 Sep 27 12:51:08 debian kernel: [ 106.670849] bnx2x: [bnx2x_sfp_e3_set_transmitter:4356(eth9)]Setting WC TX to 0 Sep 27 12:51:08 debian kernel: [ 106.671072] bnx2x: [bnx2x_set_aer_mmd:3342(eth9)]Set AER to 0x2 Sep 27 12:51:08 debian kernel: [ 106.672137] bnx2x: [bnx2x_init_hw_port:6304(eth9)]starting port init port 0 Sep 27 12:51:08 debian kernel: [ 106.672526] bnx2x: [bnx2x_init_hw_func:6527(eth9)]starting func init func 0 Sep 27 12:51:08 debian kernel: [ 106.675564] bnx2x: [bnx2x_extract_max_cfg:1490(eth1)]Max BW configured to 0 - using 100 instead Sep 27 12:51:08 debian kernel: [ 106.675758] bnx2x 0000:04:00.1: eth1: NIC Link is Up, 8000 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:08 debian kernel: [ 106.718537] bnx2x: [bnx2x_set_aer_mmd:3342(eth1)]Set AER to 0x2 Sep 27 12:51:08 debian kernel: [ 106.794594] bnx2x: [bnx2x_phy_probe:11586(eth9)]Begin phy probe Sep 27 12:51:08 debian kernel: [ 106.794715] bnx2x: [bnx2x_phy_probe:11602(eth9)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:08 debian kernel: [ 106.794901] bnx2x: [bnx2x_populate_int_phy:11230(eth9)]:chip_id = 0x168e0000 Sep 27 12:51:08 debian kernel: [ 106.795025] bnx2x: [bnx2x_populate_int_phy:11342(eth9)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:08 debian kernel: [ 106.795211] bnx2x: [bnx2x_phy_def_cfg:11499(eth9)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:51:08 debian kernel: [ 106.795392] bnx2x: [bnx2x_phy_probe:11602(eth9)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:08 debian kernel: [ 106.795575] bnx2x: [bnx2x_phy_probe:11643(eth9)]End phy probe. #phys found 1 Sep 27 12:51:08 debian kernel: [ 106.795724] bnx2x 0000:05:00.1: eth9: using MSI-X IRQs: sp 108 fp[0] 109 ... fp[0] 109 Sep 27 12:51:08 debian kernel: [ 106.795914] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth9)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:08 debian kernel: [ 106.797000] bnx2x: [bnx2x_extract_max_cfg:1490(eth9)]Max BW configured to 0 - using 100 instead Sep 27 12:51:08 debian kernel: [ 106.799200] bnx2x: [bnx2x_fw_command:2618(eth9)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:08 debian kernel: [ 106.820458] bnx2x: [bnx2x_fw_command:2630(eth9)][after 20 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:08 debian kernel: [ 106.825654] bnx2x: [bnx2x_phy_init:11783(eth9)]Phy Initialization started Sep 27 12:51:08 debian kernel: [ 106.825775] bnx2x: [bnx2x_phy_init:11785(eth9)](1) req_speed 0, req_flowctrl 0 Sep 27 12:51:08 debian kernel: [ 106.825958] bnx2x: [bnx2x_phy_init:11787(eth9)](2) req_speed 0, req_flowctrl 0 Sep 27 12:51:08 debian kernel: [ 106.826148] bnx2x: [bnx2x_emac_init:1463(eth9)]EMAC reset reg is 1024 Sep 27 12:51:08 debian kernel: [ 106.826310] bnx2x: [set_phy_vars:3478(eth9)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:08 debian kernel: [ 106.826498] bnx2x: [bnx2x_phy_init:11812(eth9)]Num of phys on board: 1 Sep 27 12:51:08 debian kernel: [ 106.826622] bnx2x: [bnx2x_warpcore_config_init:4250(eth9)]Begin Warpcore init, link_speed 0, serdes_net_if = 0x3000000 Sep 27 12:51:08 debian kernel: [ 106.826810] bnx2x: [bnx2x_set_aer_mmd:3342(eth9)]Set AER to 0x2 Sep 27 12:51:08 debian kernel: [ 106.827005] bnx2x: [bnx2x_warpcore_enable_AN_KR:3591(eth9)]Enable Auto Negotiation for KR Sep 27 12:51:08 debian kernel: [ 106.827405] bnx2x: [bnx2x_warpcore_enable_AN_KR:3611(eth9)]Advertize 1G Sep 27 12:51:08 debian kernel: [ 106.827603] bnx2x: [bnx2x_warpcore_enable_AN_KR:3622(eth9)]Advertize 10G Sep 27 12:51:08 debian kernel: [ 106.828171] bnx2x: [bnx2x_calc_ieee_aneg_adv:3438(eth9)]ieee_fc = 0x1a0 Sep 27 12:51:08 debian kernel: [ 106.828293] bnx2x: [bnx2x_ext_phy_set_pause:3505(eth9)]Ext phy AN advertize 0xc01 Sep 27 12:51:08 debian kernel: [ 106.828456] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:51:08 debian kernel: [ 106.829250] bnx2x: [bnx2x_warpcore_config_init:4340(eth9)]Exit config init Sep 27 12:51:08 debian kernel: [ 106.859436] bnx2x: [bnx2x_link_int_enable:5748(eth9)]port 0, is_xgxs 0, int_status 0x0 Sep 27 12:51:08 debian kernel: [ 106.859619] bnx2x: [bnx2x_link_int_enable:5752(eth9)] int_mask 0x3c0000, MI_INT 0, SERDES_LINK 0 Sep 27 12:51:08 debian kernel: [ 106.859800] bnx2x: [bnx2x_link_int_enable:5755(eth9)] 10G 0, XGXS_LINK 0 Sep 27 12:51:08 debian kernel: [ 106.861778] bnx2x: [bnx2x_get_settings:251(eth9)]ethtool_cmd: cmd 1 Sep 27 12:51:08 debian kernel: [ 106.864243] bnx2x: [bnx2x_get_settings:251(eth1)]ethtool_cmd: cmd 1 Sep 27 12:51:08 debian kernel: [ 106.865523] bnx2x: [bnx2x_get_settings:251(eth9)]ethtool_cmd: cmd 1 Sep 27 12:51:08 debian kernel: [ 106.866950] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:51:08 debian kernel: [ 106.867437] bnx2x: [bnx2x_get_settings:251(eth1)]ethtool_cmd: cmd 1 Sep 27 12:51:08 debian kernel: [ 106.883485] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:51:08 debian kernel: [ 106.943867] bnx2x: [bnx2x_fw_command:2618(eth2)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:08 debian kernel: [ 106.965361] bnx2x: [bnx2x_fw_command:2630(eth2)][after 20 ms] read (10120001) seq is (1) from FW MB Sep 27 12:51:08 debian kernel: [ 106.965551] bnx2x: [bnx2x_nic_load:1815(eth2)]pmf 0 Sep 27 12:51:08 debian kernel: [ 106.965693] bnx2x 0000:04:00.2: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:51:08 debian kernel: [ 106.968723] bnx2x: [bnx2x_init_hw_func:6527(eth2)]starting func init func 2 Sep 27 12:51:08 debian kernel: [ 107.086466] bnx2x: [bnx2x_dcc_event:2965(eth1)]dcc_event 0x300 Sep 27 12:51:08 debian kernel: [ 107.086592] bnx2x: [bnx2x_extract_max_cfg:1490(eth1)]Max BW configured to 0 - using 100 instead Sep 27 12:51:08 debian kernel: [ 107.086775] bnx2x: [bnx2x_fw_command:2618(eth1)]wrote command (30000003) to FW MB param 0x00000000 Sep 27 12:51:08 debian kernel: [ 107.090395] bnx2x: [bnx2x_phy_probe:11586(eth2)]Begin phy probe Sep 27 12:51:08 debian kernel: [ 107.090512] bnx2x: [bnx2x_phy_probe:11602(eth2)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:08 debian kernel: [ 107.090694] bnx2x: [bnx2x_populate_int_phy:11230(eth2)]:chip_id = 0x168e0000 Sep 27 12:51:08 debian kernel: [ 107.090816] bnx2x: [bnx2x_populate_int_phy:11342(eth2)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:08 debian kernel: [ 107.091001] bnx2x: [bnx2x_phy_def_cfg:11499(eth2)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:51:08 debian kernel: [ 107.091189] bnx2x: [bnx2x_phy_probe:11602(eth2)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:08 debian kernel: [ 107.091379] bnx2x: [bnx2x_phy_probe:11643(eth2)]End phy probe. #phys found 1 Sep 27 12:51:08 debian kernel: [ 107.091527] bnx2x 0000:04:00.2: eth2: using MSI-X IRQs: sp 94 fp[0] 95 ... fp[0] 95 Sep 27 12:51:08 debian kernel: [ 107.091715] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth2)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:08 debian kernel: [ 107.097268] bnx2x: [bnx2x_fw_command:2630(eth1)][after 10 ms] read (30100003) seq is (3) from FW MB Sep 27 12:51:08 debian kernel: [ 107.097455] bnx2x: [set_phy_vars:3478(eth1)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:08 debian kernel: [ 107.097644] bnx2x: [bnx2x_link_status_update:4481(eth1)]phy link up Sep 27 12:51:08 debian kernel: [ 107.097765] bnx2x: [bnx2x_link_status_update:4590(eth1)]media_types = 0xf0 Sep 27 12:51:08 debian kernel: [ 107.097886] bnx2x: [bnx2x_link_status_update:4608(eth1)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:08 debian kernel: [ 107.098070] bnx2x: [bnx2x_link_status_update:4610(eth1)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:08 debian kernel: [ 107.098658] bnx2x: [bnx2x_fw_command:2618(eth2)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:08 debian kernel: [ 107.109261] bnx2x: [bnx2x_fw_command:2630(eth2)][after 10 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:08 debian kernel: [ 107.114477] bnx2x: [set_phy_vars:3478(eth2)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:08 debian kernel: [ 107.114659] bnx2x: [bnx2x_link_status_update:4481(eth2)]phy link up Sep 27 12:51:08 debian kernel: [ 107.114779] bnx2x: [bnx2x_link_status_update:4590(eth2)]media_types = 0xf0 Sep 27 12:51:08 debian kernel: [ 107.114900] bnx2x: [bnx2x_link_status_update:4608(eth2)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:08 debian kernel: [ 107.115084] bnx2x: [bnx2x_link_status_update:4610(eth2)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:08 debian kernel: [ 107.115277] bnx2x 0000:04:00.2: eth2: NIC Link is Up, 2500 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:08 debian kernel: [ 107.116299] bnx2x: [bnx2x_get_settings:251(eth2)]ethtool_cmd: cmd 1 Sep 27 12:51:08 debian kernel: [ 107.122744] bnx2x: [bnx2x_fw_command:2618(eth10)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:08 debian kernel: [ 107.140078] bnx2x: [bnx2x_dcc_event:2965(eth1)]dcc_event 0x200 Sep 27 12:51:08 debian kernel: [ 107.140203] bnx2x: [bnx2x_extract_max_cfg:1490(eth1)]Max BW configured to 0 - using 100 instead Sep 27 12:51:08 debian kernel: [ 107.140395] bnx2x: [bnx2x_fw_command:2618(eth1)]wrote command (30000004) to FW MB param 0x00000000 Sep 27 12:51:08 debian kernel: [ 107.146236] bnx2x: [bnx2x_fw_command:2630(eth10)][after 20 ms] read (10120001) seq is (1) from FW MB Sep 27 12:51:08 debian kernel: [ 107.146426] bnx2x: [bnx2x_nic_load:1815(eth10)]pmf 0 Sep 27 12:51:08 debian kernel: [ 107.146567] bnx2x 0000:05:00.2: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:51:08 debian kernel: [ 107.149588] bnx2x: [bnx2x_init_hw_func:6527(eth10)]starting func init func 2 Sep 27 12:51:08 debian kernel: [ 107.151233] bnx2x: [bnx2x_fw_command:2630(eth1)][after 10 ms] read (30100004) seq is (4) from FW MB Sep 27 12:51:08 debian kernel: [ 107.151419] bnx2x: [set_phy_vars:3478(eth1)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:08 debian kernel: [ 107.151606] bnx2x: [bnx2x_link_status_update:4481(eth1)]phy link up Sep 27 12:51:08 debian kernel: [ 107.151727] bnx2x: [bnx2x_link_status_update:4590(eth1)]media_types = 0xf0 Sep 27 12:51:08 debian kernel: [ 107.151853] bnx2x: [bnx2x_link_status_update:4608(eth1)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:08 debian kernel: [ 107.152040] bnx2x: [bnx2x_link_status_update:4610(eth1)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:08 debian kernel: [ 107.174276] bnx2x: [bnx2x_dcc_event:2965(eth1)]dcc_event 0x200 Sep 27 12:51:08 debian kernel: [ 107.174397] bnx2x: [bnx2x_extract_max_cfg:1490(eth1)]Max BW configured to 0 - using 100 instead Sep 27 12:51:08 debian kernel: [ 107.174575] bnx2x: [bnx2x_fw_command:2618(eth1)]wrote command (30000005) to FW MB param 0x00000000 Sep 27 12:51:08 debian kernel: [ 107.185209] bnx2x: [bnx2x_fw_command:2630(eth1)][after 10 ms] read (30100005) seq is (5) from FW MB Sep 27 12:51:08 debian kernel: [ 107.185393] bnx2x: [set_phy_vars:3478(eth1)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:08 debian kernel: [ 107.185577] bnx2x: [bnx2x_link_status_update:4481(eth1)]phy link up Sep 27 12:51:08 debian kernel: [ 107.185697] bnx2x: [bnx2x_link_status_update:4590(eth1)]media_types = 0xf0 Sep 27 12:51:08 debian kernel: [ 107.185821] bnx2x: [bnx2x_link_status_update:4608(eth1)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:08 debian kernel: [ 107.186008] bnx2x: [bnx2x_link_status_update:4610(eth1)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:08 debian kernel: [ 107.271378] bnx2x: [bnx2x_phy_probe:11586(eth10)]Begin phy probe Sep 27 12:51:08 debian kernel: [ 107.271506] bnx2x: [bnx2x_phy_probe:11602(eth10)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:08 debian kernel: [ 107.271701] bnx2x: [bnx2x_populate_int_phy:11230(eth10)]:chip_id = 0x168e0000 Sep 27 12:51:08 debian kernel: [ 107.271831] bnx2x: [bnx2x_populate_int_phy:11342(eth10)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:08 debian kernel: [ 107.272031] bnx2x: [bnx2x_phy_def_cfg:11499(eth10)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:51:08 debian kernel: [ 107.272227] bnx2x: [bnx2x_phy_probe:11602(eth10)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:08 debian kernel: [ 107.272419] bnx2x: [bnx2x_phy_probe:11643(eth10)]End phy probe. #phys found 1 Sep 27 12:51:08 debian kernel: [ 107.272570] bnx2x 0000:05:00.2: eth10: using MSI-X IRQs: sp 110 fp[0] 111 ... fp[0] 111 Sep 27 12:51:08 debian kernel: [ 107.272768] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth10)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:08 debian kernel: [ 107.274696] bnx2x: [bnx2x_fw_command:2618(eth10)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:08 debian kernel: [ 107.285141] bnx2x: [bnx2x_fw_command:2630(eth10)][after 10 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:08 debian kernel: [ 107.290363] bnx2x: [set_phy_vars:3478(eth10)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:08 debian kernel: [ 107.290555] bnx2x: [bnx2x_link_status_update:4481(eth10)]phy link up Sep 27 12:51:08 debian kernel: [ 107.290682] bnx2x: [bnx2x_link_status_update:4590(eth10)]media_types = 0xf0 Sep 27 12:51:08 debian kernel: [ 107.290811] bnx2x: [bnx2x_link_status_update:4608(eth10)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:08 debian kernel: [ 107.291007] bnx2x: [bnx2x_link_status_update:4610(eth10)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:08 debian kernel: [ 107.291205] bnx2x 0000:05:00.2: eth10: NIC Link is Up, 2500 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:08 debian kernel: [ 107.292249] bnx2x: [bnx2x_get_settings:251(eth10)]ethtool_cmd: cmd 1 Sep 27 12:51:08 debian kernel: [ 107.303132] bnx2x: [bnx2x_set_aer_mmd:3342(eth9)]Set AER to 0x2 Sep 27 12:51:08 debian kernel: [ 107.365745] bnx2x: [bnx2x_set_aer_mmd:3342(eth9)]Set AER to 0x2 Sep 27 12:51:08 debian kernel: [ 107.365943] bnx2x: [bnx2x_link_update:6470(eth9)]port 0, XGXS?1, int_status 0x0 Sep 27 12:51:08 debian kernel: [ 107.366128] bnx2x: [bnx2x_link_update:6477(eth9)]int_mask 0x0 MI_INT 0, SERDES_LINK 0 Sep 27 12:51:08 debian kernel: [ 107.366309] bnx2x: [bnx2x_link_update:6481(eth9)] 10G 0, XGXS_LINK f Sep 27 12:51:08 debian kernel: [ 107.366498] bnx2x: [bnx2x_warpcore_read_status:5436(eth9)]0x81d1 = 0x5005 Sep 27 12:51:08 debian kernel: [ 107.366897] bnx2x: [bnx2x_ext_phy_resolve_fc:3573(eth9)]Ext PHY pause result 0xd Sep 27 12:51:08 debian kernel: [ 107.367146] bnx2x: [bnx2x_warpcore_read_status:5471(eth9)]lane 2 gp_speed 0x20f Sep 27 12:51:08 debian kernel: [ 107.367326] bnx2x: [bnx2x_get_link_speed_duplex:5284(eth9)]phy link up Sep 27 12:51:08 debian kernel: [ 107.367446] bnx2x: [bnx2x_get_link_speed_duplex:5359(eth9)] phy_link_up 1 line_speed 10000 Sep 27 12:51:08 debian kernel: [ 107.367628] bnx2x: [bnx2x_warpcore_read_status:5482(eth9)]duplex 1 flow_ctrl 0x300 link_status 0x140075 Sep 27 12:51:08 debian kernel: [ 107.367810] bnx2x: [bnx2x_link_update:6616(eth9)]vars->flow_ctrl = 0x300, vars->link_status = 0x140075, ext_phy_line_speed = 0 Sep 27 12:51:08 debian kernel: [ 107.369083] bnx2x: [bnx2x_link_int_ack:5828(eth9)]Ack link up interrupt with mask 0x3c0000 Sep 27 12:51:08 debian kernel: [ 107.369263] bnx2x: [bnx2x_xmac_enable:1706(eth9)]enabling XMAC Sep 27 12:51:08 debian kernel: [ 107.370383] bnx2x: [bnx2x_xmac_init:1658(eth9)]Init XMAC to 10G x 1 port per path Sep 27 12:51:08 debian kernel: [ 107.371599] bnx2x: [bnx2x_set_led:5986(eth9)]bnx2x_set_led: port 0, mode 2 Sep 27 12:51:08 debian kernel: [ 107.371720] bnx2x: [bnx2x_set_led:5988(eth9)]speed 0x2710, hw_led_mode 0x1 Sep 27 12:51:08 debian kernel: [ 107.371748] bnx2x: [bnx2x_fw_command:2618(eth3)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:08 debian kernel: [ 107.392076] bnx2x: [bnx2x_extract_max_cfg:1490(eth9)]Max BW configured to 0 - using 100 instead Sep 27 12:51:08 debian kernel: [ 107.392264] bnx2x 0000:05:00.1: eth9: NIC Link is Up, 8000 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:08 debian kernel: [ 107.393065] bnx2x: [bnx2x_fw_command:2630(eth3)][after 20 ms] read (10120001) seq is (1) from FW MB Sep 27 12:51:08 debian kernel: [ 107.393252] bnx2x: [bnx2x_nic_load:1815(eth3)]pmf 0 Sep 27 12:51:08 debian kernel: [ 107.393389] bnx2x 0000:04:00.3: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:51:08 debian kernel: [ 107.396437] bnx2x: [bnx2x_init_hw_func:6527(eth3)]starting func init func 2 Sep 27 12:51:08 debian kernel: [ 107.484011] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:51:09 debian kernel: [ 107.518100] bnx2x: [bnx2x_phy_probe:11586(eth3)]Begin phy probe Sep 27 12:51:09 debian kernel: [ 107.518219] bnx2x: [bnx2x_phy_probe:11602(eth3)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:09 debian kernel: [ 107.518402] bnx2x: [bnx2x_populate_int_phy:11230(eth3)]:chip_id = 0x168e0000 Sep 27 12:51:09 debian kernel: [ 107.518524] bnx2x: [bnx2x_populate_int_phy:11342(eth3)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:09 debian kernel: [ 107.518708] bnx2x: [bnx2x_phy_def_cfg:11499(eth3)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:51:09 debian kernel: [ 107.518892] bnx2x: [bnx2x_phy_probe:11602(eth3)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:09 debian kernel: [ 107.519080] bnx2x: [bnx2x_phy_probe:11643(eth3)]End phy probe. #phys found 1 Sep 27 12:51:09 debian kernel: [ 107.519224] bnx2x 0000:04:00.3: eth3: using MSI-X IRQs: sp 96 fp[0] 97 ... fp[0] 97 Sep 27 12:51:09 debian kernel: [ 107.519413] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth3)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:09 debian kernel: [ 107.521354] bnx2x: [bnx2x_fw_command:2618(eth3)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 107.531970] bnx2x: [bnx2x_fw_command:2630(eth3)][after 10 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:09 debian kernel: [ 107.537183] bnx2x: [set_phy_vars:3478(eth3)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:09 debian kernel: [ 107.537369] bnx2x: [bnx2x_link_status_update:4481(eth3)]phy link up Sep 27 12:51:09 debian kernel: [ 107.537491] bnx2x: [bnx2x_link_status_update:4590(eth3)]media_types = 0xf0 Sep 27 12:51:09 debian kernel: [ 107.537614] bnx2x: [bnx2x_link_status_update:4608(eth3)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:09 debian kernel: [ 107.537800] bnx2x: [bnx2x_link_status_update:4610(eth3)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:09 debian kernel: [ 107.537994] bnx2x 0000:04:00.3: eth3: NIC Link is Up, 1000 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:09 debian kernel: [ 107.539023] bnx2x: [bnx2x_get_settings:251(eth3)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 107.540398] bnx2x: [bnx2x_get_settings:251(eth9)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 107.540967] bnx2x: [bnx2x_get_settings:251(eth9)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 107.546244] bnx2x: [bnx2x_fw_command:2618(eth11)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 107.567947] bnx2x: [bnx2x_fw_command:2630(eth11)][after 20 ms] read (10120001) seq is (1) from FW MB Sep 27 12:51:09 debian kernel: [ 107.568141] bnx2x: [bnx2x_nic_load:1815(eth11)]pmf 0 Sep 27 12:51:09 debian kernel: [ 107.568284] bnx2x 0000:05:00.3: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:51:09 debian kernel: [ 107.571256] bnx2x: [bnx2x_init_hw_func:6527(eth11)]starting func init func 2 Sep 27 12:51:09 debian kernel: [ 107.693090] bnx2x: [bnx2x_phy_probe:11586(eth11)]Begin phy probe Sep 27 12:51:09 debian kernel: [ 107.693215] bnx2x: [bnx2x_phy_probe:11602(eth11)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:09 debian kernel: [ 107.693408] bnx2x: [bnx2x_populate_int_phy:11230(eth11)]:chip_id = 0x168e0000 Sep 27 12:51:09 debian kernel: [ 107.693536] bnx2x: [bnx2x_populate_int_phy:11342(eth11)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:09 debian kernel: [ 107.695042] bnx2x: [bnx2x_phy_def_cfg:11499(eth11)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:51:09 debian kernel: [ 107.695234] bnx2x: [bnx2x_phy_probe:11602(eth11)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:09 debian kernel: [ 107.695423] bnx2x: [bnx2x_phy_probe:11643(eth11)]End phy probe. #phys found 1 Sep 27 12:51:09 debian kernel: [ 107.695575] bnx2x 0000:05:00.3: eth11: using MSI-X IRQs: sp 112 fp[0] 113 ... fp[0] 113 Sep 27 12:51:09 debian kernel: [ 107.695771] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth11)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:09 debian kernel: [ 107.697695] bnx2x: [bnx2x_fw_command:2618(eth11)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 107.708850] bnx2x: [bnx2x_fw_command:2630(eth11)][after 10 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:09 debian kernel: [ 107.714072] bnx2x: [set_phy_vars:3478(eth11)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:09 debian kernel: [ 107.714260] bnx2x: [bnx2x_link_status_update:4481(eth11)]phy link up Sep 27 12:51:09 debian kernel: [ 107.714385] bnx2x: [bnx2x_link_status_update:4590(eth11)]media_types = 0xf0 Sep 27 12:51:09 debian kernel: [ 107.714509] bnx2x: [bnx2x_link_status_update:4608(eth11)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:09 debian kernel: [ 107.714704] bnx2x: [bnx2x_link_status_update:4610(eth11)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:09 debian kernel: [ 107.714907] bnx2x 0000:05:00.3: eth11: NIC Link is Up, 1000 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:09 debian kernel: [ 107.715938] bnx2x: [bnx2x_get_settings:251(eth11)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 107.718845] bnx2x: [bnx2x_get_settings:251(eth10)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 107.719860] bnx2x: [bnx2x_set_aer_mmd:3342(eth1)]Set AER to 0x2 Sep 27 12:51:09 debian kernel: [ 107.792132] bnx2x: [bnx2x_fw_command:2618(eth4)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 107.813780] bnx2x: [bnx2x_fw_command:2630(eth4)][after 20 ms] read (10120001) seq is (1) from FW MB Sep 27 12:51:09 debian kernel: [ 107.813961] bnx2x: [bnx2x_nic_load:1815(eth4)]pmf 0 Sep 27 12:51:09 debian kernel: [ 107.814097] bnx2x 0000:04:00.4: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:51:09 debian kernel: [ 107.817115] bnx2x: [bnx2x_init_hw_func:6527(eth4)]starting func init func 4 Sep 27 12:51:09 debian kernel: [ 107.829775] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:51:09 debian kernel: [ 107.927018] bnx2x: [bnx2x_dcc_event:2965(eth9)]dcc_event 0x300 Sep 27 12:51:09 debian kernel: [ 107.927141] bnx2x: [bnx2x_extract_max_cfg:1490(eth9)]Max BW configured to 0 - using 100 instead Sep 27 12:51:09 debian kernel: [ 107.927319] bnx2x: [bnx2x_fw_command:2618(eth9)]wrote command (30000003) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 107.937694] bnx2x: [bnx2x_fw_command:2630(eth9)][after 10 ms] read (30100003) seq is (3) from FW MB Sep 27 12:51:09 debian kernel: [ 107.937882] bnx2x: [set_phy_vars:3478(eth9)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:09 debian kernel: [ 107.938069] bnx2x: [bnx2x_link_status_update:4481(eth9)]phy link up Sep 27 12:51:09 debian kernel: [ 107.938190] bnx2x: [bnx2x_link_status_update:4590(eth9)]media_types = 0xf0 Sep 27 12:51:09 debian kernel: [ 107.938313] bnx2x: [bnx2x_link_status_update:4608(eth9)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:09 debian kernel: [ 107.938496] bnx2x: [bnx2x_link_status_update:4610(eth9)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:09 debian kernel: [ 107.938720] bnx2x: [set_phy_vars:3478(eth11)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:09 debian kernel: [ 107.938867] bnx2x: [bnx2x_phy_probe:11586(eth4)]Begin phy probe Sep 27 12:51:09 debian kernel: [ 107.938868] bnx2x: [bnx2x_phy_probe:11602(eth4)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:09 debian kernel: [ 107.938871] bnx2x: [bnx2x_populate_int_phy:11230(eth4)]:chip_id = 0x168e0000 Sep 27 12:51:09 debian kernel: [ 107.938875] bnx2x: [bnx2x_populate_int_phy:11342(eth4)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:09 debian kernel: [ 107.938881] bnx2x: [bnx2x_phy_def_cfg:11499(eth4)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:51:09 debian kernel: [ 107.938883] bnx2x: [bnx2x_phy_probe:11602(eth4)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:09 debian kernel: [ 107.938885] bnx2x: [bnx2x_phy_probe:11643(eth4)]End phy probe. #phys found 1 Sep 27 12:51:09 debian kernel: [ 107.938916] bnx2x 0000:04:00.4: eth4: using MSI-X IRQs: sp 98 fp[0] 99 ... fp[0] 99 Sep 27 12:51:09 debian kernel: [ 107.938925] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth4)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:09 debian kernel: [ 107.940353] bnx2x: [bnx2x_link_status_update:4481(eth11)]phy link up Sep 27 12:51:09 debian kernel: [ 107.940471] bnx2x: [bnx2x_link_status_update:4590(eth11)]media_types = 0xf0 Sep 27 12:51:09 debian kernel: [ 107.940587] bnx2x: [bnx2x_link_status_update:4608(eth11)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:09 debian kernel: [ 107.940767] bnx2x: [bnx2x_link_status_update:4610(eth11)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:09 debian kernel: [ 107.941678] bnx2x: [bnx2x_fw_command:2618(eth4)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 107.952686] bnx2x: [bnx2x_fw_command:2630(eth4)][after 10 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:09 debian kernel: [ 107.957898] bnx2x: [set_phy_vars:3478(eth4)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:09 debian kernel: [ 107.958078] bnx2x: [bnx2x_link_status_update:4481(eth4)]phy link up Sep 27 12:51:09 debian kernel: [ 107.958198] bnx2x: [bnx2x_link_status_update:4590(eth4)]media_types = 0xf0 Sep 27 12:51:09 debian kernel: [ 107.958319] bnx2x: [bnx2x_link_status_update:4608(eth4)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:09 debian kernel: [ 107.958503] bnx2x: [bnx2x_link_status_update:4610(eth4)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:09 debian kernel: [ 107.958696] bnx2x 0000:04:00.4: eth4: NIC Link is Up, 2500 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:09 debian kernel: [ 107.959748] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 107.961176] bnx2x: [bnx2x_get_settings:251(eth2)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 107.962400] bnx2x: [bnx2x_get_settings:251(eth10)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 107.963617] bnx2x: [bnx2x_get_settings:251(eth3)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 107.964833] bnx2x: [bnx2x_get_settings:251(eth11)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 107.966818] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 107.972446] bnx2x: [bnx2x_fw_command:2618(eth12)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 107.993654] bnx2x: [bnx2x_fw_command:2630(eth12)][after 20 ms] read (10120001) seq is (1) from FW MB Sep 27 12:51:09 debian kernel: [ 107.993840] bnx2x: [bnx2x_nic_load:1815(eth12)]pmf 0 Sep 27 12:51:09 debian kernel: [ 107.993977] bnx2x 0000:05:00.4: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:51:09 debian kernel: [ 107.997046] bnx2x: [bnx2x_init_hw_func:6527(eth12)]starting func init func 4 Sep 27 12:51:09 debian kernel: [ 107.999973] bnx2x: [bnx2x_dcc_event:2965(eth11)]dcc_event 0x100 Sep 27 12:51:09 debian kernel: [ 108.000096] bnx2x: [bnx2x_fw_command:2618(eth11)]wrote command (30000003) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 108.010643] bnx2x: [bnx2x_fw_command:2630(eth11)][after 10 ms] read (30100003) seq is (3) from FW MB Sep 27 12:51:09 debian kernel: [ 108.010826] bnx2x: [set_phy_vars:3478(eth11)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:09 debian kernel: [ 108.011007] bnx2x: [bnx2x_link_status_update:4481(eth11)]phy link up Sep 27 12:51:09 debian kernel: [ 108.011125] bnx2x: [bnx2x_link_status_update:4590(eth11)]media_types = 0xf0 Sep 27 12:51:09 debian kernel: [ 108.011243] bnx2x: [bnx2x_link_status_update:4608(eth11)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:09 debian kernel: [ 108.011423] bnx2x: [bnx2x_link_status_update:4610(eth11)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:09 debian kernel: [ 108.011736] bnx2x: [bnx2x_dcc_event:2965(eth9)]dcc_event 0x200 Sep 27 12:51:09 debian kernel: [ 108.011856] bnx2x: [bnx2x_extract_max_cfg:1490(eth9)]Max BW configured to 0 - using 100 instead Sep 27 12:51:09 debian kernel: [ 108.012034] bnx2x: [bnx2x_fw_command:2618(eth9)]wrote command (30000004) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 108.022636] bnx2x: [bnx2x_fw_command:2630(eth9)][after 10 ms] read (30100004) seq is (4) from FW MB Sep 27 12:51:09 debian kernel: [ 108.022823] bnx2x: [set_phy_vars:3478(eth9)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:09 debian kernel: [ 108.023007] bnx2x: [bnx2x_link_status_update:4481(eth9)]phy link up Sep 27 12:51:09 debian kernel: [ 108.023128] bnx2x: [bnx2x_link_status_update:4590(eth9)]media_types = 0xf0 Sep 27 12:51:09 debian kernel: [ 108.023252] bnx2x: [bnx2x_link_status_update:4608(eth9)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:09 debian kernel: [ 108.023437] bnx2x: [bnx2x_link_status_update:4610(eth9)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:09 debian kernel: [ 108.023651] bnx2x: [set_phy_vars:3478(eth11)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:09 debian kernel: [ 108.023836] bnx2x: [bnx2x_link_status_update:4481(eth11)]phy link up Sep 27 12:51:09 debian kernel: [ 108.023955] bnx2x: [bnx2x_link_status_update:4590(eth11)]media_types = 0xf0 Sep 27 12:51:09 debian kernel: [ 108.024076] bnx2x: [bnx2x_link_status_update:4608(eth11)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:09 debian kernel: [ 108.024262] bnx2x: [bnx2x_link_status_update:4610(eth11)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:09 debian kernel: [ 108.037602] bnx2x: [bnx2x_dcc_event:2965(eth9)]dcc_event 0x200 Sep 27 12:51:09 debian kernel: [ 108.039030] bnx2x: [bnx2x_extract_max_cfg:1490(eth9)]Max BW configured to 0 - using 100 instead Sep 27 12:51:09 debian kernel: [ 108.039213] bnx2x: [bnx2x_fw_command:2618(eth9)]wrote command (30000005) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 108.049616] bnx2x: [bnx2x_fw_command:2630(eth9)][after 10 ms] read (30100005) seq is (5) from FW MB Sep 27 12:51:09 debian kernel: [ 108.049799] bnx2x: [set_phy_vars:3478(eth9)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:09 debian kernel: [ 108.049980] bnx2x: [bnx2x_link_status_update:4481(eth9)]phy link up Sep 27 12:51:09 debian kernel: [ 108.050099] bnx2x: [bnx2x_link_status_update:4590(eth9)]media_types = 0xf0 Sep 27 12:51:09 debian kernel: [ 108.050220] bnx2x: [bnx2x_link_status_update:4608(eth9)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:09 debian kernel: [ 108.050404] bnx2x: [bnx2x_link_status_update:4610(eth9)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:09 debian kernel: [ 108.050613] bnx2x: [set_phy_vars:3478(eth11)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:09 debian kernel: [ 108.050797] bnx2x: [bnx2x_link_status_update:4481(eth11)]phy link up Sep 27 12:51:09 debian kernel: [ 108.050917] bnx2x: [bnx2x_link_status_update:4590(eth11)]media_types = 0xf0 Sep 27 12:51:09 debian kernel: [ 108.051038] bnx2x: [bnx2x_link_status_update:4608(eth11)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:09 debian kernel: [ 108.051223] bnx2x: [bnx2x_link_status_update:4610(eth11)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:09 debian kernel: [ 108.118689] bnx2x: [bnx2x_phy_probe:11586(eth12)]Begin phy probe Sep 27 12:51:09 debian kernel: [ 108.118808] bnx2x: [bnx2x_phy_probe:11602(eth12)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:09 debian kernel: [ 108.118995] bnx2x: [bnx2x_populate_int_phy:11230(eth12)]:chip_id = 0x168e0000 Sep 27 12:51:09 debian kernel: [ 108.119119] bnx2x: [bnx2x_populate_int_phy:11342(eth12)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:09 debian kernel: [ 108.119308] bnx2x: [bnx2x_phy_def_cfg:11499(eth12)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:51:09 debian kernel: [ 108.119491] bnx2x: [bnx2x_phy_probe:11602(eth12)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:09 debian kernel: [ 108.119676] bnx2x: [bnx2x_phy_probe:11643(eth12)]End phy probe. #phys found 1 Sep 27 12:51:09 debian kernel: [ 108.119819] bnx2x 0000:05:00.4: eth12: using MSI-X IRQs: sp 114 fp[0] 115 ... fp[0] 115 Sep 27 12:51:09 debian kernel: [ 108.120010] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth12)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:09 debian kernel: [ 108.121928] bnx2x: [bnx2x_fw_command:2618(eth12)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 108.132560] bnx2x: [bnx2x_fw_command:2630(eth12)][after 10 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:09 debian kernel: [ 108.137768] bnx2x: [set_phy_vars:3478(eth12)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:09 debian kernel: [ 108.137951] bnx2x: [bnx2x_link_status_update:4481(eth12)]phy link up Sep 27 12:51:09 debian kernel: [ 108.138072] bnx2x: [bnx2x_link_status_update:4590(eth12)]media_types = 0xf0 Sep 27 12:51:09 debian kernel: [ 108.138192] bnx2x: [bnx2x_link_status_update:4608(eth12)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:09 debian kernel: [ 108.138376] bnx2x: [bnx2x_link_status_update:4610(eth12)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:09 debian kernel: [ 108.138567] bnx2x 0000:05:00.4: eth12: NIC Link is Up, 2500 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:09 debian kernel: [ 108.139582] bnx2x: [bnx2x_get_settings:251(eth12)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 108.143803] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 108.144285] bnx2x: [bnx2x_get_settings:251(eth1)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 108.144797] bnx2x: [bnx2x_get_settings:251(eth2)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 108.145277] bnx2x: [bnx2x_get_settings:251(eth3)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 108.145759] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 108.153990] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 108.154463] bnx2x: [bnx2x_get_settings:251(eth9)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 108.154954] bnx2x: [bnx2x_get_settings:251(eth10)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 108.160706] bnx2x: [bnx2x_get_settings:251(eth12)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 108.217830] bnx2x: [bnx2x_fw_command:2618(eth5)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 108.239489] bnx2x: [bnx2x_fw_command:2630(eth5)][after 20 ms] read (10120001) seq is (1) from FW MB Sep 27 12:51:09 debian kernel: [ 108.239672] bnx2x: [bnx2x_nic_load:1815(eth5)]pmf 0 Sep 27 12:51:09 debian kernel: [ 108.239811] bnx2x 0000:04:00.5: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:51:09 debian kernel: [ 108.242828] bnx2x: [bnx2x_init_hw_func:6527(eth5)]starting func init func 4 Sep 27 12:51:09 debian kernel: [ 108.305447] bnx2x: [bnx2x_set_aer_mmd:3342(eth9)]Set AER to 0x2 Sep 27 12:51:09 debian kernel: [ 108.364573] bnx2x: [bnx2x_phy_probe:11586(eth5)]Begin phy probe Sep 27 12:51:09 debian kernel: [ 108.364693] bnx2x: [bnx2x_phy_probe:11602(eth5)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:09 debian kernel: [ 108.364878] bnx2x: [bnx2x_populate_int_phy:11230(eth5)]:chip_id = 0x168e0000 Sep 27 12:51:09 debian kernel: [ 108.364999] bnx2x: [bnx2x_populate_int_phy:11342(eth5)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:09 debian kernel: [ 108.365187] bnx2x: [bnx2x_phy_def_cfg:11499(eth5)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:51:09 debian kernel: [ 108.365370] bnx2x: [bnx2x_phy_probe:11602(eth5)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:09 debian kernel: [ 108.365551] bnx2x: [bnx2x_phy_probe:11643(eth5)]End phy probe. #phys found 1 Sep 27 12:51:09 debian kernel: [ 108.365698] bnx2x 0000:04:00.5: eth5: using MSI-X IRQs: sp 100 fp[0] 101 ... fp[0] 101 Sep 27 12:51:09 debian kernel: [ 108.365880] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth5)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:09 debian kernel: [ 108.367796] bnx2x: [bnx2x_fw_command:2618(eth5)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 108.378391] bnx2x: [bnx2x_fw_command:2630(eth5)][after 10 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:09 debian kernel: [ 108.383603] bnx2x: [set_phy_vars:3478(eth5)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:09 debian kernel: [ 108.383786] bnx2x: [bnx2x_link_status_update:4481(eth5)]phy link up Sep 27 12:51:09 debian kernel: [ 108.383906] bnx2x: [bnx2x_link_status_update:4590(eth5)]media_types = 0xf0 Sep 27 12:51:09 debian kernel: [ 108.384027] bnx2x: [bnx2x_link_status_update:4608(eth5)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:09 debian kernel: [ 108.384209] bnx2x: [bnx2x_link_status_update:4610(eth5)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:09 debian kernel: [ 108.384399] bnx2x 0000:04:00.5: eth5: NIC Link is Up, 1000 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:09 debian kernel: [ 108.385415] bnx2x: [bnx2x_get_settings:251(eth5)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 108.386387] bnx2x: [bnx2x_get_settings:251(eth12)]ethtool_cmd: cmd 1 Sep 27 12:51:09 debian kernel: [ 108.391952] bnx2x: [bnx2x_fw_command:2618(eth13)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:09 debian kernel: [ 108.413368] bnx2x: [bnx2x_fw_command:2630(eth13)][after 20 ms] read (10120001) seq is (1) from FW MB Sep 27 12:51:09 debian kernel: [ 108.413558] bnx2x: [bnx2x_nic_load:1815(eth13)]pmf 0 Sep 27 12:51:09 debian kernel: [ 108.413702] bnx2x 0000:05:00.5: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:51:09 debian kernel: [ 108.416692] bnx2x: [bnx2x_init_hw_func:6527(eth13)]starting func init func 4 Sep 27 12:51:09 debian kernel: [ 108.485327] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:51:10 debian kernel: [ 108.538514] bnx2x: [bnx2x_phy_probe:11586(eth13)]Begin phy probe Sep 27 12:51:10 debian kernel: [ 108.538643] bnx2x: [bnx2x_phy_probe:11602(eth13)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:10 debian kernel: [ 108.538841] bnx2x: [bnx2x_populate_int_phy:11230(eth13)]:chip_id = 0x168e0000 Sep 27 12:51:10 debian kernel: [ 108.538968] bnx2x: [bnx2x_populate_int_phy:11342(eth13)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:10 debian kernel: [ 108.539163] bnx2x: [bnx2x_phy_def_cfg:11499(eth13)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:51:10 debian kernel: [ 108.539360] bnx2x: [bnx2x_phy_probe:11602(eth13)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:10 debian kernel: [ 108.539553] bnx2x: [bnx2x_phy_probe:11643(eth13)]End phy probe. #phys found 1 Sep 27 12:51:10 debian kernel: [ 108.539712] bnx2x 0000:05:00.5: eth13: using MSI-X IRQs: sp 116 fp[0] 117 ... fp[0] 117 Sep 27 12:51:10 debian kernel: [ 108.539913] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth13)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:10 debian kernel: [ 108.541846] bnx2x: [bnx2x_fw_command:2618(eth13)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:10 debian kernel: [ 108.552274] bnx2x: [bnx2x_fw_command:2630(eth13)][after 10 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:10 debian kernel: [ 108.558850] bnx2x: [set_phy_vars:3478(eth13)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:10 debian kernel: [ 108.559049] bnx2x: [bnx2x_link_status_update:4481(eth13)]phy link up Sep 27 12:51:10 debian kernel: [ 108.559176] bnx2x: [bnx2x_link_status_update:4590(eth13)]media_types = 0xf0 Sep 27 12:51:10 debian kernel: [ 108.559306] bnx2x: [bnx2x_link_status_update:4608(eth13)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:10 debian kernel: [ 108.559500] bnx2x: [bnx2x_link_status_update:4610(eth13)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:10 debian kernel: [ 108.559698] bnx2x 0000:05:00.5: eth13: NIC Link is Up, 1000 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:10 debian kernel: [ 108.560717] bnx2x: [bnx2x_get_settings:251(eth13)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 108.612237] bnx2x: [bnx2x_get_settings:251(eth13)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 108.636035] bnx2x: [bnx2x_fw_command:2618(eth6)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:10 debian kernel: [ 108.658202] bnx2x: [bnx2x_fw_command:2630(eth6)][after 20 ms] read (10120001) seq is (1) from FW MB Sep 27 12:51:10 debian kernel: [ 108.658394] bnx2x: [bnx2x_nic_load:1815(eth6)]pmf 0 Sep 27 12:51:10 debian kernel: [ 108.658539] bnx2x 0000:04:00.6: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:51:10 debian kernel: [ 108.661595] bnx2x: [bnx2x_init_hw_func:6527(eth6)]starting func init func 6 Sep 27 12:51:10 debian kernel: [ 108.721172] bnx2x: [bnx2x_set_aer_mmd:3342(eth1)]Set AER to 0x2 Sep 27 12:51:10 debian kernel: [ 108.783345] bnx2x: [bnx2x_phy_probe:11586(eth6)]Begin phy probe Sep 27 12:51:10 debian kernel: [ 108.783470] bnx2x: [bnx2x_phy_probe:11602(eth6)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:10 debian kernel: [ 108.783666] bnx2x: [bnx2x_populate_int_phy:11230(eth6)]:chip_id = 0x168e0000 Sep 27 12:51:10 debian kernel: [ 108.783794] bnx2x: [bnx2x_populate_int_phy:11342(eth6)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:10 debian kernel: [ 108.783990] bnx2x: [bnx2x_phy_def_cfg:11499(eth6)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:51:10 debian kernel: [ 108.784185] bnx2x: [bnx2x_phy_probe:11602(eth6)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:10 debian kernel: [ 108.784375] bnx2x: [bnx2x_phy_probe:11643(eth6)]End phy probe. #phys found 1 Sep 27 12:51:10 debian kernel: [ 108.784533] bnx2x 0000:04:00.6: eth6: using MSI-X IRQs: sp 102 fp[0] 103 ... fp[0] 103 Sep 27 12:51:10 debian kernel: [ 108.784730] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth6)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:10 debian kernel: [ 108.786673] bnx2x: [bnx2x_fw_command:2618(eth6)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:10 debian kernel: [ 108.797105] bnx2x: [bnx2x_fw_command:2630(eth6)][after 10 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:10 debian kernel: [ 108.802333] bnx2x: [set_phy_vars:3478(eth6)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:10 debian kernel: [ 108.802526] bnx2x: [bnx2x_link_status_update:4481(eth6)]phy link up Sep 27 12:51:10 debian kernel: [ 108.802653] bnx2x: [bnx2x_link_status_update:4590(eth6)]media_types = 0xf0 Sep 27 12:51:10 debian kernel: [ 108.802781] bnx2x: [bnx2x_link_status_update:4608(eth6)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:10 debian kernel: [ 108.802972] bnx2x: [bnx2x_link_status_update:4610(eth6)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:10 debian kernel: [ 108.803175] bnx2x 0000:04:00.6: eth6: NIC Link is Up, 2500 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:10 debian kernel: [ 108.804226] bnx2x: [bnx2x_get_settings:251(eth6)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 108.810688] bnx2x: [bnx2x_fw_command:2618(eth14)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:10 debian kernel: [ 108.831085] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:51:10 debian kernel: [ 108.832082] bnx2x: [bnx2x_fw_command:2630(eth14)][after 20 ms] read (10120001) seq is (1) from FW MB Sep 27 12:51:10 debian kernel: [ 108.832267] bnx2x: [bnx2x_nic_load:1815(eth14)]pmf 0 Sep 27 12:51:10 debian kernel: [ 108.832407] bnx2x 0000:05:00.6: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:51:10 debian kernel: [ 108.835357] bnx2x: [bnx2x_init_hw_func:6527(eth14)]starting func init func 6 Sep 27 12:51:10 debian kernel: [ 108.957114] bnx2x: [bnx2x_phy_probe:11586(eth14)]Begin phy probe Sep 27 12:51:10 debian kernel: [ 108.957233] bnx2x: [bnx2x_phy_probe:11602(eth14)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:10 debian kernel: [ 108.957415] bnx2x: [bnx2x_populate_int_phy:11230(eth14)]:chip_id = 0x168e0000 Sep 27 12:51:10 debian kernel: [ 108.957535] bnx2x: [bnx2x_populate_int_phy:11342(eth14)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:10 debian kernel: [ 108.957722] bnx2x: [bnx2x_phy_def_cfg:11499(eth14)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:51:10 debian kernel: [ 108.957907] bnx2x: [bnx2x_phy_probe:11602(eth14)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:10 debian kernel: [ 108.958095] bnx2x: [bnx2x_phy_probe:11643(eth14)]End phy probe. #phys found 1 Sep 27 12:51:10 debian kernel: [ 108.958245] bnx2x 0000:05:00.6: eth14: using MSI-X IRQs: sp 118 fp[0] 119 ... fp[0] 119 Sep 27 12:51:10 debian kernel: [ 108.958433] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth14)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:10 debian kernel: [ 108.960362] bnx2x: [bnx2x_fw_command:2618(eth14)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:10 debian kernel: [ 108.970986] bnx2x: [bnx2x_fw_command:2630(eth14)][after 10 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:10 debian kernel: [ 108.976194] bnx2x: [set_phy_vars:3478(eth14)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:10 debian kernel: [ 108.976375] bnx2x: [bnx2x_link_status_update:4481(eth14)]phy link up Sep 27 12:51:10 debian kernel: [ 108.976493] bnx2x: [bnx2x_link_status_update:4590(eth14)]media_types = 0xf0 Sep 27 12:51:10 debian kernel: [ 108.976612] bnx2x: [bnx2x_link_status_update:4608(eth14)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:10 debian kernel: [ 108.976791] bnx2x: [bnx2x_link_status_update:4610(eth14)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:10 debian kernel: [ 108.976983] bnx2x 0000:05:00.6: eth14: NIC Link is Up, 2500 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:10 debian kernel: [ 108.978016] bnx2x: [bnx2x_get_settings:251(eth14)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 108.979964] bnx2x: [bnx2x_get_settings:251(eth12)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 108.981268] bnx2x: [bnx2x_get_settings:251(eth11)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 108.982486] bnx2x: [bnx2x_get_settings:251(eth5)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 108.983699] bnx2x: [bnx2x_get_settings:251(eth13)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 108.985785] bnx2x: [bnx2x_get_settings:251(eth6)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 108.987009] bnx2x: [bnx2x_get_settings:251(eth14)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.056036] bnx2x: [bnx2x_fw_command:2618(eth7)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:10 debian kernel: [ 109.077913] bnx2x: [bnx2x_fw_command:2630(eth7)][after 20 ms] read (10120001) seq is (1) from FW MB Sep 27 12:51:10 debian kernel: [ 109.078108] bnx2x: [bnx2x_nic_load:1815(eth7)]pmf 0 Sep 27 12:51:10 debian kernel: [ 109.078250] bnx2x 0000:04:00.7: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:51:10 debian kernel: [ 109.081302] bnx2x: [bnx2x_init_hw_func:6527(eth7)]starting func init func 6 Sep 27 12:51:10 debian kernel: [ 109.203055] bnx2x: [bnx2x_phy_probe:11586(eth7)]Begin phy probe Sep 27 12:51:10 debian kernel: [ 109.203176] bnx2x: [bnx2x_phy_probe:11602(eth7)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:10 debian kernel: [ 109.203362] bnx2x: [bnx2x_populate_int_phy:11230(eth7)]:chip_id = 0x168e0000 Sep 27 12:51:10 debian kernel: [ 109.203487] bnx2x: [bnx2x_populate_int_phy:11342(eth7)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:10 debian kernel: [ 109.203676] bnx2x: [bnx2x_phy_def_cfg:11499(eth7)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:51:10 debian kernel: [ 109.203866] bnx2x: [bnx2x_phy_probe:11602(eth7)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:10 debian kernel: [ 109.204057] bnx2x: [bnx2x_phy_probe:11643(eth7)]End phy probe. #phys found 1 Sep 27 12:51:10 debian kernel: [ 109.204212] bnx2x 0000:04:00.7: eth7: using MSI-X IRQs: sp 104 fp[0] 105 ... fp[0] 105 Sep 27 12:51:10 debian kernel: [ 109.204411] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth7)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:10 debian kernel: [ 109.206351] bnx2x: [bnx2x_fw_command:2618(eth7)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:10 debian kernel: [ 109.216818] bnx2x: [bnx2x_fw_command:2630(eth7)][after 10 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:10 debian kernel: [ 109.223310] bnx2x: [set_phy_vars:3478(eth7)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:10 debian kernel: [ 109.223506] bnx2x: [bnx2x_link_status_update:4481(eth7)]phy link up Sep 27 12:51:10 debian kernel: [ 109.223636] bnx2x: [bnx2x_link_status_update:4590(eth7)]media_types = 0xf0 Sep 27 12:51:10 debian kernel: [ 109.223762] bnx2x: [bnx2x_link_status_update:4608(eth7)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:10 debian kernel: [ 109.223957] bnx2x: [bnx2x_link_status_update:4610(eth7)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:10 debian kernel: [ 109.224154] bnx2x: [bnx2x_extract_max_cfg:1490(eth7)]Max BW configured to 0 - using 100 instead Sep 27 12:51:10 debian kernel: [ 109.224350] bnx2x 0000:04:00.7: eth7: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:10 debian kernel: [ 109.225386] bnx2x: [bnx2x_extract_max_cfg:1490(eth7)]Max BW configured to 0 - using 100 instead Sep 27 12:51:10 debian kernel: [ 109.225582] bnx2x: [bnx2x_get_settings:251(eth7)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.232281] bnx2x: [bnx2x_fw_command:2618(eth15)]wrote command (10000001) to FW MB param 0x00000000 Sep 27 12:51:10 debian kernel: [ 109.253792] bnx2x: [bnx2x_fw_command:2630(eth15)][after 20 ms] read (10120001) seq is (1) from FW MB Sep 27 12:51:10 debian kernel: [ 109.253985] bnx2x: [bnx2x_nic_load:1815(eth15)]pmf 0 Sep 27 12:51:10 debian kernel: [ 109.254126] bnx2x 0000:05:00.7: Loading bnx2x/bnx2x-e2-7.0.29.0.fw Sep 27 12:51:10 debian kernel: [ 109.257151] bnx2x: [bnx2x_init_hw_func:6527(eth15)]starting func init func 6 Sep 27 12:51:10 debian kernel: [ 109.306766] bnx2x: [bnx2x_set_aer_mmd:3342(eth9)]Set AER to 0x2 Sep 27 12:51:10 debian kernel: [ 109.378936] bnx2x: [bnx2x_phy_probe:11586(eth15)]Begin phy probe Sep 27 12:51:10 debian kernel: [ 109.379062] bnx2x: [bnx2x_phy_probe:11602(eth15)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:10 debian kernel: [ 109.379256] bnx2x: [bnx2x_populate_int_phy:11230(eth15)]:chip_id = 0x168e0000 Sep 27 12:51:10 debian kernel: [ 109.379385] bnx2x: [bnx2x_populate_int_phy:11342(eth15)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:10 debian kernel: [ 109.379582] bnx2x: [bnx2x_phy_def_cfg:11499(eth15)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:51:10 debian kernel: [ 109.379777] bnx2x: [bnx2x_phy_probe:11602(eth15)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:10 debian kernel: [ 109.379971] bnx2x: [bnx2x_phy_probe:11643(eth15)]End phy probe. #phys found 1 Sep 27 12:51:10 debian kernel: [ 109.380120] bnx2x 0000:05:00.7: eth15: using MSI-X IRQs: sp 120 fp[0] 121 ... fp[0] 121 Sep 27 12:51:10 debian kernel: [ 109.380318] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth15)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:10 debian kernel: [ 109.382245] bnx2x: [bnx2x_fw_command:2618(eth15)]wrote command (11000002) to FW MB param 0x00000000 Sep 27 12:51:10 debian kernel: [ 109.392698] bnx2x: [bnx2x_fw_command:2630(eth15)][after 10 ms] read (11100002) seq is (2) from FW MB Sep 27 12:51:10 debian kernel: [ 109.397917] bnx2x: [set_phy_vars:3478(eth15)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:10 debian kernel: [ 109.398113] bnx2x: [bnx2x_link_status_update:4481(eth15)]phy link up Sep 27 12:51:10 debian kernel: [ 109.398240] bnx2x: [bnx2x_link_status_update:4590(eth15)]media_types = 0xf0 Sep 27 12:51:10 debian kernel: [ 109.398369] bnx2x: [bnx2x_link_status_update:4608(eth15)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:10 debian kernel: [ 109.398561] bnx2x: [bnx2x_link_status_update:4610(eth15)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:10 debian kernel: [ 109.398762] bnx2x: [bnx2x_extract_max_cfg:1490(eth15)]Max BW configured to 0 - using 100 instead Sep 27 12:51:10 debian kernel: [ 109.398951] bnx2x 0000:05:00.7: eth15: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:10 debian kernel: [ 109.399980] bnx2x: [bnx2x_extract_max_cfg:1490(eth15)]Max BW configured to 0 - using 100 instead Sep 27 12:51:10 debian kernel: [ 109.400171] bnx2x: [bnx2x_get_settings:251(eth15)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.403232] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.403721] bnx2x: [bnx2x_get_settings:251(eth1)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.404207] bnx2x: [bnx2x_get_settings:251(eth2)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.404696] bnx2x: [bnx2x_get_settings:251(eth3)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.405175] bnx2x: [bnx2x_get_settings:251(eth4)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.405655] bnx2x: [bnx2x_get_settings:251(eth5)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.406143] bnx2x: [bnx2x_get_settings:251(eth6)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.406628] bnx2x: [bnx2x_extract_max_cfg:1490(eth7)]Max BW configured to 0 - using 100 instead Sep 27 12:51:10 debian kernel: [ 109.406819] bnx2x: [bnx2x_get_settings:251(eth7)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.407297] bnx2x: [bnx2x_get_settings:251(eth8)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.407780] bnx2x: [bnx2x_get_settings:251(eth9)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.408256] bnx2x: [bnx2x_get_settings:251(eth10)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.408743] bnx2x: [bnx2x_get_settings:251(eth12)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.409219] bnx2x: [bnx2x_get_settings:251(eth13)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.409752] bnx2x: [bnx2x_get_settings:251(eth14)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.410233] bnx2x: [bnx2x_extract_max_cfg:1490(eth15)]Max BW configured to 0 - using 100 instead Sep 27 12:51:10 debian kernel: [ 109.410420] bnx2x: [bnx2x_get_settings:251(eth15)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.411687] bnx2x: [bnx2x_get_settings:251(eth14)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.451659] bnx2x: [bnx2x_extract_max_cfg:1490(eth15)]Max BW configured to 0 - using 100 instead Sep 27 12:51:10 debian kernel: [ 109.451840] bnx2x: [bnx2x_get_settings:251(eth15)]ethtool_cmd: cmd 1 Sep 27 12:51:10 debian kernel: [ 109.486641] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:51:11 debian kernel: [ 109.722478] bnx2x: [bnx2x_set_aer_mmd:3342(eth1)]Set AER to 0x2 Sep 27 12:51:11 debian kernel: [ 109.832402] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:51:11 debian kernel: [ 109.920493] bnx2x: [bnx2x_fw_command:2618(eth7)]wrote command (20000003) to FW MB param 0x00000000 Sep 27 12:51:11 debian kernel: [ 109.931330] bnx2x: [bnx2x_fw_command:2630(eth7)][after 10 ms] read (20120003) seq is (3) from FW MB Sep 27 12:51:11 debian kernel: [ 109.941504] bnx2x: [bnx2x_fw_command:2618(eth7)]wrote command (21000004) to FW MB param 0x00000000 Sep 27 12:51:11 debian kernel: [ 109.963311] bnx2x: [bnx2x_fw_command:2630(eth7)][after 20 ms] read (21100004) seq is (4) from FW MB Sep 27 12:51:11 debian kernel: [ 109.973102] bnx2x: [bnx2x_fw_command:2618(eth15)]wrote command (20010003) to FW MB param 0x00000000 Sep 27 12:51:11 debian kernel: [ 109.983292] bnx2x: [bnx2x_fw_command:2630(eth15)][after 10 ms] read (20120003) seq is (3) from FW MB Sep 27 12:51:11 debian kernel: [ 109.993509] bnx2x: [bnx2x_fw_command:2618(eth15)]wrote command (21000004) to FW MB param 0x00000000 Sep 27 12:51:11 debian kernel: [ 110.015273] bnx2x: [bnx2x_fw_command:2630(eth15)][after 20 ms] read (21100004) seq is (4) from FW MB Sep 27 12:51:11 debian kernel: [ 110.038164] bnx2x: [bnx2x_fw_command:2618(eth1)]wrote command (20010006) to FW MB param 0x00000000 Sep 27 12:51:11 debian kernel: [ 110.049248] bnx2x: [bnx2x_fw_command:2630(eth1)][after 10 ms] read (20120006) seq is (6) from FW MB Sep 27 12:51:11 debian kernel: [ 110.059409] bnx2x: [bnx2x_fw_command:2618(eth1)]wrote command (21000007) to FW MB param 0x00000000 Sep 27 12:51:11 debian kernel: [ 110.059441] bnx2x: [bnx2x_pmf_update:2569(eth3)]pmf 1 Sep 27 12:51:11 debian kernel: [ 110.060451] bnx2x: [set_phy_vars:3478(eth3)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:11 debian kernel: [ 110.060634] bnx2x: [bnx2x_link_status_update:4481(eth3)]phy link up Sep 27 12:51:11 debian kernel: [ 110.060755] bnx2x: [bnx2x_link_status_update:4590(eth3)]media_types = 0xf0 Sep 27 12:51:11 debian kernel: [ 110.060876] bnx2x: [bnx2x_link_status_update:4608(eth3)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:11 debian kernel: [ 110.061064] bnx2x: [bnx2x_link_status_update:4610(eth3)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:11 debian kernel: [ 110.061267] bnx2x: [bnx2x_set_aer_mmd:3342(eth3)]Set AER to 0x2 Sep 27 12:51:11 debian kernel: [ 110.082225] bnx2x: [bnx2x_fw_command:2630(eth1)][after 20 ms] read (21100007) seq is (7) from FW MB Sep 27 12:51:11 debian kernel: [ 110.090241] bnx2x: [bnx2x_fw_command:2618(eth1)]wrote command (10000008) to FW MB param 0x00000000 Sep 27 12:51:11 debian kernel: [ 110.112205] bnx2x: [bnx2x_fw_command:2630(eth1)][after 20 ms] read (10120008) seq is (8) from FW MB Sep 27 12:51:11 debian kernel: [ 110.112385] bnx2x: [bnx2x_nic_load:1815(eth1)]pmf 0 Sep 27 12:51:11 debian kernel: [ 110.112534] bnx2x: [bnx2x_init_hw_func:6527(eth1)]starting func init func 0 Sep 27 12:51:11 debian kernel: [ 110.234245] bnx2x: [bnx2x_phy_probe:11586(eth1)]Begin phy probe Sep 27 12:51:11 debian kernel: [ 110.234365] bnx2x: [bnx2x_phy_probe:11602(eth1)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:11 debian kernel: [ 110.234552] bnx2x: [bnx2x_populate_int_phy:11230(eth1)]:chip_id = 0x168e0000 Sep 27 12:51:11 debian kernel: [ 110.234672] bnx2x: [bnx2x_populate_int_phy:11342(eth1)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:11 debian kernel: [ 110.234857] bnx2x: [bnx2x_phy_def_cfg:11499(eth1)]Default config phy idx 0 cfg 0x1000000 speed_cap_mask 0x500050 Sep 27 12:51:11 debian kernel: [ 110.235040] bnx2x: [bnx2x_phy_probe:11602(eth1)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:11 debian kernel: [ 110.235226] bnx2x: [bnx2x_phy_probe:11643(eth1)]End phy probe. #phys found 1 Sep 27 12:51:11 debian kernel: [ 110.235375] bnx2x 0000:04:00.1: eth1: using MSI-X IRQs: sp 92 fp[0] 93 ... fp[0] 93 Sep 27 12:51:11 debian kernel: [ 110.235565] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth1)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:11 debian kernel: [ 110.237567] bnx2x: [bnx2x_fw_command:2618(eth1)]wrote command (11000009) to FW MB param 0x00000000 Sep 27 12:51:11 debian kernel: [ 110.248111] bnx2x: [bnx2x_fw_command:2630(eth1)][after 10 ms] read (11100009) seq is (9) from FW MB Sep 27 12:51:11 debian kernel: [ 110.253328] bnx2x: [set_phy_vars:3478(eth1)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:11 debian kernel: [ 110.253510] bnx2x: [bnx2x_link_status_update:4481(eth1)]phy link up Sep 27 12:51:11 debian kernel: [ 110.253630] bnx2x: [bnx2x_link_status_update:4590(eth1)]media_types = 0xf0 Sep 27 12:51:11 debian kernel: [ 110.253752] bnx2x: [bnx2x_link_status_update:4608(eth1)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:11 debian kernel: [ 110.253936] bnx2x: [bnx2x_link_status_update:4610(eth1)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:11 debian kernel: [ 110.254136] bnx2x 0000:04:00.1: eth1: NIC Link is Up, 8000 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:11 debian kernel: [ 110.258133] bnx2x: [bnx2x_fw_command:2618(eth9)]wrote command (20010006) to FW MB param 0x00000000 Sep 27 12:51:11 debian kernel: [ 110.269099] bnx2x: [bnx2x_fw_command:2630(eth9)][after 10 ms] read (20120006) seq is (6) from FW MB Sep 27 12:51:11 debian kernel: [ 110.279262] bnx2x: [bnx2x_fw_command:2618(eth9)]wrote command (21000007) to FW MB param 0x00000000 Sep 27 12:51:11 debian kernel: [ 110.290970] bnx2x: [bnx2x_pmf_update:2569(eth11)]pmf 1 Sep 27 12:51:11 debian kernel: [ 110.292099] bnx2x: [set_phy_vars:3478(eth11)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:11 debian kernel: [ 110.292287] bnx2x: [bnx2x_link_status_update:4481(eth11)]phy link up Sep 27 12:51:11 debian kernel: [ 110.292407] bnx2x: [bnx2x_link_status_update:4590(eth11)]media_types = 0xf0 Sep 27 12:51:11 debian kernel: [ 110.292527] bnx2x: [bnx2x_link_status_update:4608(eth11)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:11 debian kernel: [ 110.292708] bnx2x: [bnx2x_link_status_update:4610(eth11)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:11 debian kernel: [ 110.292900] bnx2x: [bnx2x_set_aer_mmd:3342(eth11)]Set AER to 0x2 Sep 27 12:51:11 debian kernel: [ 110.323061] bnx2x: [bnx2x_fw_command:2630(eth9)][after 40 ms] read (21100007) seq is (7) from FW MB Sep 27 12:51:11 debian kernel: [ 110.331137] bnx2x: [bnx2x_fw_command:2618(eth9)]wrote command (10000008) to FW MB param 0x00000000 Sep 27 12:51:11 debian kernel: [ 110.353040] bnx2x: [bnx2x_fw_command:2630(eth9)][after 20 ms] read (10120008) seq is (8) from FW MB Sep 27 12:51:11 debian kernel: [ 110.353459] bnx2x: [bnx2x_nic_load:1815(eth9)]pmf 0 Sep 27 12:51:11 debian kernel: [ 110.353600] bnx2x: [bnx2x_init_hw_func:6527(eth9)]starting func init func 0 Sep 27 12:51:11 debian kernel: [ 110.475078] bnx2x: [bnx2x_phy_probe:11586(eth9)]Begin phy probe Sep 27 12:51:11 debian kernel: [ 110.475197] bnx2x: [bnx2x_phy_probe:11602(eth9)]phy_config_swapped 0, phy_index 0, actual_phy_idx 0 Sep 27 12:51:11 debian kernel: [ 110.475384] bnx2x: [bnx2x_populate_int_phy:11230(eth9)]:chip_id = 0x168e0000 Sep 27 12:51:11 debian kernel: [ 110.475507] bnx2x: [bnx2x_populate_int_phy:11342(eth9)]Internal phy port=0, addr=0x1, mdio_ctl=0x8000 Sep 27 12:51:11 debian kernel: [ 110.475696] bnx2x: [bnx2x_phy_def_cfg:11499(eth9)]Default config phy idx 0 cfg 0x0 speed_cap_mask 0x500050 Sep 27 12:51:11 debian kernel: [ 110.475880] bnx2x: [bnx2x_phy_probe:11602(eth9)]phy_config_swapped 0, phy_index 1, actual_phy_idx 1 Sep 27 12:51:11 debian kernel: [ 110.476067] bnx2x: [bnx2x_phy_probe:11643(eth9)]End phy probe. #phys found 1 Sep 27 12:51:11 debian kernel: [ 110.476210] bnx2x 0000:05:00.1: eth9: using MSI-X IRQs: sp 108 fp[0] 109 ... fp[0] 109 Sep 27 12:51:11 debian kernel: [ 110.476399] bnx2x: [bnx2x_get_mod_abs_int_cfg:4124(eth9)]ERROR: Invalid cfg pin 0 for module detect indication Sep 27 12:51:11 debian kernel: [ 110.478383] bnx2x: [bnx2x_fw_command:2618(eth9)]wrote command (11000009) to FW MB param 0x00000000 Sep 27 12:51:11 debian kernel: [ 110.487954] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:51:11 debian kernel: [ 110.488947] bnx2x: [bnx2x_fw_command:2630(eth9)][after 10 ms] read (11100009) seq is (9) from FW MB Sep 27 12:51:11 debian kernel: [ 110.494159] bnx2x: [set_phy_vars:3478(eth9)]req_flow_ctrl 0, req_line_speed 0, speed_cap_mask 500050 Sep 27 12:51:11 debian kernel: [ 110.494338] bnx2x: [bnx2x_link_status_update:4481(eth9)]phy link up Sep 27 12:51:11 debian kernel: [ 110.494454] bnx2x: [bnx2x_link_status_update:4590(eth9)]media_types = 0xf0 Sep 27 12:51:11 debian kernel: [ 110.494575] bnx2x: [bnx2x_link_status_update:4608(eth9)]link_status 0x40170075 phy_link_up 1 int_mask 0x0 Sep 27 12:51:11 debian kernel: [ 110.494757] bnx2x: [bnx2x_link_status_update:4610(eth9)]line_speed 2710 duplex 1 flow_ctrl 0x300 Sep 27 12:51:11 debian kernel: [ 110.494958] bnx2x 0000:05:00.1: eth9: NIC Link is Up, 8000 Mbps full duplex, Flow control: ON - receive & transmit Sep 27 12:51:12 debian kernel: [ 110.833720] bnx2x: [bnx2x_set_aer_mmd:3342(eth0)]Set AER to 0x0 Sep 27 12:51:12 debian kernel: [ 111.024452] bnx2x: [bnx2x_get_settings:251(eth1)]ethtool_cmd: cmd 1 Sep 27 12:51:12 debian kernel: [ 111.025673] bnx2x: [bnx2x_get_settings:251(eth9)]ethtool_cmd: cmd 1 Sep 27 12:51:12 debian kernel: [ 111.063562] bnx2x: [bnx2x_set_aer_mmd:3342(eth3)]Set AER to 0x2 Sep 27 12:51:12 debian kernel: [ 111.295402] bnx2x: [bnx2x_set_aer_mmd:3342(eth11)]Set AER to 0x2 Sep 27 12:51:13 debian kernel: [ 111.489269] bnx2x: [bnx2x_set_aer_mmd:3342(eth8)]Set AER to 0x0 Sep 27 12:51:13 debian kernel: [ 111.499591] bnx2x: [bnx2x_get_settings:251(eth0)]ethtool_cmd: cmd 1 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists